Yongnuo Yn622n-tx + 2x Yn622n
The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N ITTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface.
Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN-622N-TX also enhances stability, as well as improving information transmission speeds.
*LCD screen display, multi-buttons quick operation.
*The firmware can be upgraded through the USB interface.
*Support wireless shutter release function.
*The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.
*Equipped with the AF focus assist light (can be disabled).
*Grouping flash mode: i-TTL/Manual flash/Super sync.
*Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.
*The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.
*Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.
*Support exposure compensation, flash value lock function(FVL).
*Support simulate (modeling) flash, red-eye reduction flash.
*Support the flash zooming (auto).
*Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
*Settings saved automatically.
*The flash sync signal can be input through the PC port.
*Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).
(The above functions need to be used with the YN-622N transceiver.)
YN-622N i-TTL wireless transceiver is designed for nikon users to design a high performance 2.4 G wireless ShanQi, can decorate a flash at 360 degrees, to achieve different results.
i-TTL and manual flash support, support after before the curtain, curtain, high speed, high synchronous speed 1/8000 s *, can remote changes between groups or flash flash exposure compensation output, support A mixture of different flash modes, I - TTL flash support transmitter installation, and support the use of transmitter on the main control unit to set grouping parameter, this product USES the transceiver design, remote control distance of up to 100 m, support seven wireless channel and A/B/C three groups, with A secondary focus light function.
Suit for (Camera) : Nikon D70, D70S, D80, D90, D200, D300, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D7000, D7100
Flash compatible (i-TTL): SB400, SB600, SB700, SB80,0 SB90,0 SB910, YN465N, YN467N, YN468N(II), YN565N, YN568N
Yongnuo Wireless i-TTL Flash Trigger YN-622N is released now, it's designed for NikonCameras and flashes.
Using Digital FSK 2.4GHz frequency band with 7 channels, it has three modes, i-TTL, Manual and Multi, and it can fire flashes at 360 degree direction, the operating range is 100 metres.
It supports FEC, FEB, FEL, High-speed Sync, 1st. Curtain, 2nd. Curtain, Modeling flash, i-TTL Group Ratio (ALL/A:B/A:B C), Manual/Multi group (ALL/ A:B/ A:B:C), Manual and Multi mode, Auto Zooming, Manual Zooming, AF Lamp.
Compatible flash mode: i-TTL, Manual flash
Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s
Support remote set the parameters of flash through the transceiver (Remote Control Mode)
Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode)
Support the flash installed on transmitter(on-top flash)and supports i-TTL function
Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode)
Support FEC, FVL function
Support modeling flash and red-eye reduction flash
Support flash zooming (auto)
Built-in AF assist beam emitter (AF Lamp)
Settings saved automatically
Compatible with YongNuo/ Nikon series flashes
Support PC port triggering strobe flashes
PC port support front/rear curtain sync and high-speed sync(Super Sync)function
Support single-contact of camera & flash triggering (max sync speed is 1/250s)