Mixed Gas Regulator for Beer & Cider - NEW
ALL SALES NOW ONLINE ONLY www.brewcrew.ie
TOF mixed co2/n2 gas primary reducing valve
1 out - 3/8 john guest fitting
Double relief valves set: 55psi
Dual guages - high/low - volume and working pressue
(psig - pounds per square inch gauge. Calibrated to read zero at sea level)
Set at a nominal 37. 5 psi at a full cylinder pressure of 2900 psi (200 bar).
Setting tolerance on the 37. 5 psi – in this case +/- 1. 5 psi
Hose - length 1050mm
Connection - bs341 no. 3
Bracket and protective guard for gaugues
Use: beer dispense
Date on block nose: 2019
How to use:
Connects directly to standard mixed gas cylinder with hose.
Hose specification: 1m high pressure hose fitted with male bullnose g5/8 bsp-p din connector.
Cylinders specification: standard mixed gas connection type bs 341 no 3 (british standard)
Outlet specifictaion: 3/8” pif (push in fitting)
Contents gauge to show condition of cylinder pressure.
Heavy duty solid brass block.
Larger orifice than competitors resulting in better flows over multiple products (commercial use).
Wall mount bracket attached - simply fix with two screws to a board or the side of wooden bar.
Easy to grip hand wheel, no need to use wrench/tools.
No attempt should be made to remove or over tighten any ancillary component other than by authorised persons.
No cylinder included in this offer
Gas for Guinness - 70/30 Stout Mix Gas Bottle - 10l
Gas for Guinness - 70/30 Stout Mix Gas Bottle - 5l
Gas for Heineken Lager - 50/50 Lager/Cider/Ale Mix Gas Bottle - 10l
Gas for Heineken Lager - 50/50 Lager/Cider/Ale Mix Gas Bottle - 5l