K42Y-2 0.047uF (47nF) 200V PIO (Paper In Oil) tone capacitor NOS
K40Y-2 0.047uF 200V PIO (paper in oil) capacitor
*Ideal capacitor for Telecaster guitars, Precision Bass and Jazz Bass. You could also try a 0.047uF cap on the neck tone pot on a Strat if using the 'Split Tone modification'.
Voltage values don't really matter too much when used in guitar ciruits but the higher the voltage of the cap the bigger they come. 400-600V is a good rnage to keep them in
These are sought after filter capacitors for their warm clear sound, free of high-frequency noise of digital-to-analogue converter.
*Vintage Paper - Foil capacitors. Capacitance provided by roll of two similar strips of pure aluminum foil (NOT METALLISED PAPER, which are separated by two similar strips of oil-saturated paper. (Paper-Foil-Paper-Foil structure)
*Contain Silver for lower impedance!!!
*The body is metal, with glass sealed isolators at the pins.
Main electrical characteristics:
*nominal capacity 0.047uF
*nominal voltage 500 volts
*possible deviation of capacity ± %10
*max. capacity 0.0517uF
*min. capacity 0.0423uF
Main physical characteristics of part, approx. dimensions:
*length of body 24 mm
*diameter of body 10 mm
*length of pins 30 mm
*diameter of pins ~0.6 mm
*All our capacitors are checked for capacitance values and impedance before shipping out to the customer. If you need matched pairs let me know and I will send you a list of measured tolerances per cap and hand pick the closest ones.
Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage.
Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.
**Purchase with confidence that the excess cost of postage which seems to add up here in Adverts shopping cart when buying multiple items is refunded immediately after transaction.