Powerful Yamaha AX-570 2x 100w/120W into 8/6 Ohm
Great good looking piece of kit.
Beefy but very well rounded sonically Yamaha stereo amplifier with phono input.
Not with original remote but with a genuine Yamaha fully compatible better looking and newer model as seen in the pictures.
Small bit that needs mentioning: When it's manually operated, the input knob causes some little crackles until it sets into the desired input position but it works smoothly and with no crackles when inputs are changed by remote, the knob turns nicely and quietly on it's own into all input positions.
Can be neatly packed and posted anywhere in the republic for the full asking price.
Please, have a look at my other items. Some speakers there too and a bunch of other cool stuff. Would strike a better deal for someone buying together with speakers.
About it :
Minmum RMS Output Power per Channel Pure Direct On, CD: V 100 Watts (8 ohms) from 20 to 20 kHz at no more than 0.015% Total Harmonic Distortion 120 Watts (6 ohms) from 20 to 20 kHz at no more than 0.03% Total Harmonic Distortion
(by IHF Dynamic Headroom Measuring Method) 8/6/4/2/ ohms = 140/170/220/290 W
Power Bandwidth (8 ohms, 0.03% THD, Half Rated Power) = 10 to 50 kHz
Damping Factor (8 ohms, 20 to 20 kHz) = 320
Input Sensitivity/ Impedance Phono MC = 160uV220 ohms Phono MM = 2.5mV/47 k-ohms CD, etc.= 150mV/47 k-ohms Main in = 1V/10k-ohms
Maximum Input Level (1 kHz) Phono MC/MM = 10/150mV
Output Level/ Impedance Rec Out = 150mV/220 ohms Pre Out = 1 V/470 ohms
Headphone Rated Output (8 ohms) 0.47 V/470 ohms 0.015% THD
Frequency Response (20 to 20 kHz) +/-0.5dB
Total Harmonic Distortion(20 to 20 kHz) Phono MC to Rec Out, 3V = 0.007%Phono MM to Rec Out, 3V = 0.003%CD etc. to Pre Ou, 1 V = 0.005%CD etc. to Sp Out, 8 ohms = 0.008%
Signal-to-Noise Ratio (IHF-A-Network) Phono MC (500 uV Input Shorted) = 76dBPhono MM(5 mV Input Shorted) = 92dBCD etc. (Shorted) = 110dB
Intermodulation Distortion (Rated Power/ 8 ohms) = 0.01%
Residual Noise (IHF-A-Network, Pure Direct On) = 70uV
Channel Separation(Vol: -30dB) Phono, Input Shorted (1kHz/10kHz) = 75/60dBCD etc.(1 kHz/10kHz) = 65/50dB
Filter Characteristics(Subsonic) 15 Hz(-18dB/oct.)
Gain Tracking Record (0 to -60 dB) 2 dB
Dimensions (W * H * D) = 435 * 150 * 389mm(17-1/8" * 5-7/8" * 15-5/16")
Weight 11.0 kg(24 lbs. 4 oz.)
6 AUDIO INPUTS
This amp lets you hook up 6 audio components including 2 tape positions, providing extensive system connectability.
PURE DIRECT SWITCH
For the ulitmate in signal purity, you can engage the Pure Direct Switch, causing the signal to bypass the tone control circuitry.
HEAVY-DUTY TOP- ART BASE
To support these heavy components and prevent vibration and resonance, Yamaha has a special base inside the chassis. It has a double panel structure, each 1.6mm thick, and the AX-570 adds extra damping material between the two panels.
Lets you add signal processors or larger amplifiers to your system. Also allows for direct subwoofer connection. Makes for greater system flexibility and room for growth.
SUBSONIC FILTER SWITCH
This feature eliminates the rumble which some turntables may produce.
GOLD PLATED CD INPUT JACK AND CD TERMINAL
Because gold is an excellent conductor and not susceptible to corrosion, this unit has gold-plated input terminals. The AX-570 goes a step further, with 2-pin gold-plated solid brass CD and Pre Out terminals for large-size cables.
3-WAY BINDING SPEAKER TERMINALS
Banana plug compatible on all channels. Permits the use of a variety of speaker wires and connectors.
31 KEY SYSTEM REMOTE CONTROL
Allows you to control the major functions of other Yamaha system components such as a CD player, cassette deck, tuner or turntable, from the amplifier's remote control.
LINEAR DAMPING FACTOR CIRCUIT
A high, stable linear damping factor means plenty of ability to stop the speaker cone from vibrating when the signal stops. It also cancels the effect of level variations due to high amp impedance. The result is clear, crisp, pure sound and significantly improved frequency response.