DMX512 Decoder LED Controller 4 Channel Driver RGBW 3CH 4CH Strip Light DC12-24V
DMX common controller adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving LED;You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.
Working temperature -20-60
Supply voltage 12V~24V
Connecting mode common anode
External dimension L164*W65*H40 mm
Packing size L183*W82*H60 mm
Net weight 360g
Gross weight 410g
Output gray RGB each 256 levels
Output current 4A(each channel)
Output power 12V:<144W, 24V:<288W
1 x DMX 512 Controller(DC12-24V)
DMX address code settings
Each DMX common controller occupied 3 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest,511 address codes could be setted in all. DMX original address code equal aggregate value of the coding switch value from 1 to 9,dial the coding switch upwards(ON is setted 1),the value of bit can be gotten, on the contrary, the value of bit is 0.
DMX signal can be received when coding switch FUN(10)=OFF(ON is setted 0).
1. example 1:
Look at the following picture, if you want to set 37 as the address code, you can only dial down the first, the third and the sixth code switch, the aggregate value of coding switch value from 1 to 9 is 32+4+1,that is, the original address code of DMX512 is 37.
2. example 1:
Look at the following picture, if you want to set 328 as the address code, you can only dial down the ninth, the seventh and the fourth code switch, the aggregate value of coding switch value from 1 to 9 is 256+64+8,that is, the original address code of DMX512 is 328.
Other functions direction for use
1. Testing function:
The tenth bit of coding switch is "FUN", that is a built-in function button. FUN=OFF shows the DMX decoder function, MX signal can be received.
The default coding switch1-9 is off: black
Switch8=ON: seven-color jumpy changing(8 steps speed)
Switch9=ON: seven-color gradual changing(8 steps speed)
2. The speed chioce of jumpy changing, gradual changing effect
When test the function, switch 8=ON shows the seven-color jumpy changing effect, switch 9=ON shows the seven-color gradual changing effect, every effect has 8 steps speed:
Off switch from 1 to 7: 0 steps
Switch7=ON:7 steps(the greatest speed)
There are several switches=ON at the same time, the great value is standard. All dial code switches= ON as the following picture, the state of the decoder shows: to test the functional effects of gradual changing, the speed of change is 7.