Aquadrive X4 HDD Water Cooling
2x brand new (100e each)
1x used (75e)
The aquadrive X4 can accommodate up to 4 (!) Hard drives in it, which are completely encapsulated in the well-cooled housing.
This is the new premium hard drive cooling series, constructed with Delrin, which absorbs vibrations better than aluminum because of its structure. Inside, large copper plates are installed, that weight approximately as much as the aquadrive aluminum. These are in turn surrounded by a water jacket, which also absorbs vibrations and insulates.
Accommodate both SATA and PATA drives.
The integrated reservoir is filled through an included spray bottle from the front. By two tubes, the two containers in the side profiles of aquadrive X4 are connected with each other, which compensates for the level. The current status can be easily read the display in the right profile of a small red ball.
Suitable for hard drives up to 15,000 rpm.
The aquadrive X4 is supplied including 4 rubber bearings and 4 Phillips screws for mounting in three 5 1 / 4 bays. Additional mounting threads allow mounting even on the upper Befestungspunkten. The use of the supplied rubber buffer is only possible when mounted on the lower mounting points. The mounting means of rail systems is usually possible.
Designed for up to four 3.5 "hard drives in three 5.25 inch bays
Material: Delrin / copper / stainless steel
Reservoir capacity: 250 ml
Dimensions: three 5.25-inch drive bays, Depth: 171.5 mm
Weight (empty, without hard drives): 2.65 kg
Connector thread: G1 / 4 "