Browse categories

2x New Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60 (Removable Balance Plug) for FPV

2x New Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60 (Removable Balance Plug) for FPV
Asking price: €26
Make an offer:
Seller:
slade_x
Feedback:
9 0
Location:
Tipperary Town, Tipperary
6 more ads from this seller
Entered/Renewed:
4 days ago
Ad Views:
363
Viewing 1 of 7
2x New Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60 (Removable Balance Plug) for FPV

Description

Condition: New

2x NEW & Unused Turnigy Graphene 1300mAh 4S 65C Lipo Pack w/XT60 (Removable Balance Plug)

Battery voltages were checked once they arrived

*******************************************************************************
Note: The 3rd battery pictured is for illustration purposes only it is not included in this sale. It is used.
**Only the 2x New & Unused Batteries are included in this listing**
*******************************************************************************


Postage Via An Post (€9 Standard / €13 Registered)


Official Description:

TURNIGY Graphene battery packs have set the standard for performance, reliability and innovation.
To help drone racers keep wires out of the way of rotors HobbyKing and Turnigy have designed this Graphene battery to have a removable balance plug.
Install the plug when charging the battery and remove it when flying for extra safety.

Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate
the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional
Lipoly battery technologies.

The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural
enemies of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life.

Turnigy Graphene batteries always provide POWER ON DEMAND with plenty of punch.

Specs:
Capacity: 1300mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 65C Constant / 130C Burst
Weight: 166g (including wire, plug & case)
Dimensions: 78x35x33mm
Balance Plug: JST-XH
Discharge Plug: XT-60

Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through the duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+

Shipping: Post/Courier
Payment: PaypalBank transfer
From sellers around the web:
Comments & Offers
ViCareyous 3 days ago
Hi, just wondering if it's 26ea or for both?
slade_x 2 days ago
@ViCareyous: Its €26 for both / €13 each not including postage.

See more in our Radio Control category available in our Adverts Shops today

€17.00
€180.00
€75.00
€69.00