Browse categories

Holybro Kopis 1 FPV Racing Drone

Holybro Kopis 1 FPV Racing Drone
Asking price: €140withdrawn
Seller:
slade_x
Feedback:
11 0
Location:
Tipperary Town, Tipperary
8 more ads from this seller
Entered/Renewed:
2 months ago
Ad Views:
817
Viewing 1 of 17
Holybro Kopis 1 FPV Racing Drone

Description

Slightly Used Holybro Kopis 1 FPV Racing Drone -BNF- FRSKY
Setup with Smart Audio for Betaflight OSD Control

Less than 10 Flights.

This listing includes:
-Used Holybro Kopis 1 FPV Racing Drone -PNP-
-Installed Frsky XSR Receiver (International Firmware) Can be changed to EU-LBT on request
-2x Sets of 5045BN 3-Blade Propellers (1 set installed)
-1x Set of updated 5048 3-Blade Propellers


Note: XSR Bind button can be accessed without taking the top off (which is really easy anyway; just remove 4 top hex screws and lift the top plate straight off). Its mounted upside down for a better fit.
Access is from the left side of the Quad and the button is facing downwards at the corner near the back of the Quad (Please see Pic)

Additional: The originally fitted Props aren't the best, i think they are too heavy, Not sure why they didnt supply some Dalprops, I have one or two pairs of Dalprops i can supply if desired.

Postage Via An Post (€9 Standard / €13 Registered)


***************************************************************
Official Description:

Brand: Holybro
Item name: Kopis 1 FPV Racing Drone
Wheelbase: 210mm
Integrated bottom plate and frame arm: 5mm thickness
Other plates: 2mm thickness
Weight: 300 grams without battery
ESC: 30A BLHeli_32 (DSHOT1200 compatible)
Motor: T-motor AIR40 2205 2450KV

Kakute F4 AIO flight controller:
MCU: STM32F405RGT6 32-bit processor
IMU: ICM20689 (SPI)
128 Mbit Dataflash chip for Blackbox logging

Atlatl video transmitter:
5.8 GHz
40 channel
Transmit power: 15mW, 25mW, 100mW, 200mW, 400mW, 600mW
MMCX Antenna connector for easy, secure connection.
Won't break or come loose like the IPEX connector used on other VTX.
Runcam Swift Mini 130 Degree 600TVL FPV Camera PAL/NTSC:
Image sensor: 1/3" SONY Super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm
Signal system: PAL / NTSC
S/N Ration: >60dB(AGC OFF)
Electronic shutter speed: PAL:1/50 ~ 100,000; NTSC:1/60 ~ 100,000
AutoGain control(AGC): YES
Back light compensation(BLC): YES
Min.illumination: 0.01Lux/1.2F
WDR: D-WDR
DNR: 2DNR
Day/Night: color / auto / B&W
Power: DC 5 to 36V
Net weight: 12g
Dimensions: 22.3mm * 22mm * 27mm

Features:
5mm full 3K carbon fiber Twill
Counter-sunk screws for great appearance and smooth finish
Kakute F4 FC with soft-mounted gyro for great filtering of vibration
Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks
5.8GHz 40CH atlatl video transmitter
Control the VTX channel and transmit power from the OSD using your transmitter sticks. No more button-pushing.
Programmable LED board controllable in Betaflight. Buzzer included.
RunCam Swift Mini FPV camera.
Adjustable camera tilt from 0 degrees to 90 degrees uptilt.
Serial receiver supported (SBUS, iBUS, Spektrum). Legacy PPM and PWM receivers not supported.


Package included:
1 x Kopis FPV racing drone
4 x T-motor AIR40 2205 2450KV
4 x 30A BLHeli_32 ESC
1 x 5.8G 40CH Atlatl VTX
1 x 5.8 GHz FPV antenna
1 x Kakute F4 AIO flight controller
4 x 5048 tri-blade propeller CW
4 x 5048 tri-blade propeller CCW
1 x Battery strap (installed)
1 x Gopro4 mount stand
1 x carrying case

*************************************************************

Shipping: Post/Courier
Payment: PaypalBank transfer
From sellers around the web:
Comments
slade_x 3 months ago
@Juan Carlos Arismendi Zambrano: sorry, no
val1234 3 months ago
Does the asking price include a cell and postage.
slade_x 2 months ago
@val1234: no
vitaljuce 1 month ago
€110 OFFERED
slade_x 1 month ago
@vitaljuce: sorry no