Browse categories

Audio Warehouse

THE SOUND SPECIALISTS

Member since:
17/08/2012
Last online:
16/01/2021
Location:
Raheny, Dublin

Activity

Active:
67
Sold out:
62
Withdrawn:
228
Units sold:
245

Feedback Score [39]

  • Rode Sm4-r

    3 The SM4-R is a suspension shock mount for mounting various RDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RDE shotgun microphones, and integrated cable management clip. The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning. PLEASE NOTE: If purchasing please send message for current stock availability. http://en.rode.com/accessories/sm4-r https://youtu.be/3_TXeQ__elU

    €49
  • Rode Smartlav+

    3 Latest version of the Smartlav + by RODE. Please see our other ad's for remaining stock of the original version at knockdown prices!! Broadcast quality, professional-grade Lavalier Mic with TRRS Jack High-quality omni-directional condenser capsule Discrete 4.5mm miniature microphone Compatible with iOS devices and select Android devices* Kevlar reinforced cable Includes wind shield and durable mounting Clip The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment. With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RDE Rec app for iOS, or any other audio app of their choice. By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation. A foam pop shield is supplied to minimise wind noise and vocal plosives (hard b, t and p sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions. The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RDEs RDE Rec app for Apple iOS devices. RDE Rec turns the users iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app. PLEASE NOTE: If purchasing please send message for current stock availability. https://www.youtube.com/user/rodemicrophones http://www.rode.com/ https://www.adverts.ie/shops/audio-warehouse/

    €64
  • Rodesc6

    3 The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback. With the SC6 users can monitor audio from the smartLav, as well as input two smartLavs into the one mono channel in interview or dual-dialogue scenarios. (Note that the two microphone inputs will be recorded to the same channel) PLEASE NOTE: If purchasing please send message for current stock availability. http://en.rode.com/accessories/sc6 https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    €15
  • Rode Sc2

    3 The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use. It is ideal for connecting the output of an Apple iPhone using a RDE i-XY microphone to a DSLR or video camera for capturing scratch audio to camera while the iPhone records the broadcast-quality track. PLEASE NOTE: If purchasing please send message for current stock availability. http://www.rode.com/accessories/sc2 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 week ago 0 comments
    €15
  • Rode Sc1

    3 The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones. Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction. PLEASE NOTE: If purchasing please send message for current stock availability. http://en.rode.com/accessories/sc1 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    €20
  • Rode Minifur Lav

    3 The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three PLEASE NOTE: If purchasing please send message for current stock availability. http://en.rode.com/accessories/minifur-lav https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 week ago 5 comments
    €17.50
  • Sonifex Rb Ma2

    3 The RB-MA2 consists of two independent low-noise microphone pre-amplifiers for converting mic level signals to line level, or for driving long lines from microphones to processing equipment. All connections and controls are on the rear panel. The microphone inputs are XLR-3 type and are electronically balanced. The input gain for each input can be adjusted individually by a recessed pre-set potentiometer which allows for the use of both dynamic and powered microphones. The XLR-3 line outputs are electronically balanced and can be wired unbalanced by grounding the non-phase signal, allowing you to feed both balanced and unbalanced equipment. For each channel there are independent switches to control a high pass filter (low frequency roll-off at 125Hz) and to provide phantom power at +48V to the connected microphones. https://sonifex.co.uk/redbox/rbma2_ld.shtml

    €350
  • Sonifex Rb Da6

    3 The RB-DA6 is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs. The RB-DA6 has 1 stereo input and 6 stereo outputs. It can also be configured so that 1 mono input can be distributed to 12 outputs by use of a switch which is recessed on the front panel to prevent it being accidentally knocked. The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output wont affect the others.The left and right input gain controls (normalising) are pre-set potentiometers accessible through the front panel. The output gain may be varied from -8dB to 18dB which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively. https://sonifex.co.uk/redbox/rbda6_ld.shtml

    €475
  • Sonifex Rb Dda6a

    3 The RB-DDA6A digital distribution amplifier is used for distributing digital audio data in AES/EBU format, repeating both the audio data and the status information of the input whilst re-normalising to standard digital audio levels.It has a single XLR-3 female AES/EBU audio input which is distributed to 6 XLR-3 male AES/EBU outputs. Applications include distributing audio from a digital mixing desk to multiple digital recorders, or feeding multiple studios with an output from a DAT machine. It can accept input sample rates in the range of 30kHz - 100kHz, and bit rates of 16, 20 and 24 bit. So, it can be used for standard CD signal distribution at 16 bit 44.1kHz, as well as for high quality 24 bit 96kHz recording. https://sonifex.co.uk/redbox/rbdda6a_ld.shtml

    €450
  • Sonifex Rb Bl4

    3 The RB-BL4 is a dual bi-directional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa. The four XLR-3 electronically balanced inputs have an impedance of 20k bridging and are routed to four unbalanced RCA (phono) outputs with an output impedance of <50. The four RCA unbalanced inputs have an impedance of 20k and are routed to four balanced XLR-3 outputs with an output impedance of <50. All connections are on the rear panel. The output gain can be adjusted for left and right channels by using pre-set potentiometers accessible through the rear panel. https://sonifex.co.uk/redbox/rbbl4_ld.shtml

    €425
  • Sonifex Rb Ul4

    3 The RB-UL4 is a 1U rack-mount quad stereo unit for interfacing domestic or semi-professional unbalanced equipment to professional balanced line levels. All connections are on the rear panel. The eight RCA unbalanced inputs have an impedance of 10k and are routed to eight balanced XLR-3 outputs with an output impedance of <50.The output gain can be individually adjusted for left and right channels by using pre-set potentiometers accessible through the rear panel. https://sonifex.co.uk/redbox/rbul4_ld.shtml

    €425
  • Sonifex Rb Pmx4

    3 The RB-PMX4 is a high performance 10 mono input to 4 mono output pre-set mixer. Each of the four outputs has a 10 way DIP switch associated with it to select which of the 10 inputs are routed to it. So, by altering the DIP switches, any of the input sources can be mixed to any of the outputs. The DIP switches are enclosed by a screw-on cover on the front panel so that the settings can not be accidentally changed for secure applications. The RB-PMX4 has been designed for situations where a small mixer is needed for installations where it will be configured and then only altered occasionally, or never altered at all. Uses for this product are numerous including a four bus mini-mixer, a multiple clean-feed generator, a 4 zone mixer for pubs and clubs and a quad stereo to mono converter to name a few. The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one wont affect the others. Each input has its own gain control which is a pre-set potentiometer accessible through the front panel. This provides gain adjustment of -8dB to +18dB. This is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively. https://sonifex.co.uk/redbox/rbpmx4_ld.shtml

    €495
  • Sonifex Rb Sm1

    3 The RB-SM1 converts a stereo input to a fully buffered and balanced mono line output, e.g. to supply cue in broadcast environments or to feed a mono PA system. The connections, which are on the rear panel, are of an XLR-3 type. The input is electronically balanced with an impedance of 20k bridging. This can be wired unbalanced to accept an output from domestic equipment. The output is electronically balanced with an output impedance of <50. The output can be wired unbalanced by grounding the non-phase signal, allowing you to feed both balanced and unbalanced equipment. Output gain adjustment using a pre-set potentiometer for the converter allows a normalised mono output from domestic stereo equipment. This potentiometer is accessible through the rear panel. https://sonifex.co.uk/redbox/rbsm1_ld.shtml

    €275
  • Sonifex Rb Ul2

    3 The RB-UL2 is a dual stereo unit for interfacing domestic or semi-professional unbalanced equipment to professional balanced line levels. All connections are on the rear panel. Four RCA unbalanced inputs have an impedance of 10k and are routed to four balanced XLR-3 outputs with an output impedance of <50. The output gain can be individually adjusted for left and right channels by using pre-set potentiometers accessible through the rear panel, allowing you to feed both balanced and unbalanced equipment. https://sonifex.co.uk/redbox/rbul2_ld.shtml

    €300
  • Humfrees

    3 HUM & NOISE IN RACK SYSTEMS ... Usual mounting of 19" equipment in a rack system results in contact between the devices through the rack rails.This creates ground loops - the most common cause of hum and noise. The unique Humfrees mounting system interrupts these groundloops by isolating the 19" units from the rails and from each other. Scarring and scratching of the front panel by the mounting screws is also eliminated. HUMFREES - QUICK & EASY INSTALLATION ! Pull the unit out of the rack 5 cm. There is normally no need to disconnect the cables. Bend the Humfrees Insulating Parts (4 x) around the corners of the front panel from the sides. Reinstall the unit with the Humfrees Screws (4 x M6). https://www.adamhall.com/shop/gr-en/19-inch-rack-accessories/19-inch-rack-fasteners/764/humfrees

    Stands
    2 weeks ago 2 comments
    €5
  • Shure Ksm 8b

    3 PLEASE NOTE: Item pictured is the nickel version, the unit for sale is the Black version. Patented cartridge design featuring two ultra-thin diaphragms (one active and one passive) and groundbreaking inverted airflow system, which allows exceptional consistency of the cardioid polar pattern throughout the entire frequency range. Accurate frequency response due to controlled proximity effect which allows for neutral mid-and-high frequency reproduction, resulting in the most natural sounding dynamic microphone available. Exceptional control of proximity effect vastly increases working distance without on-axis coloration. Off-axis attenuation is flat and broad resulting in superior quality of rejection of unwanted sound sources for increased vocal clarity. The Dualdyne cartridge re-images the Shure Pumping Pneumatic Shock Mount design with specific resistances and precisely machined components that are fully integrated into the cartridges acoustic properties. Patent Pending Diaphragm Stabilisation System (DSS) Technology protects and stabilizes the active diaphragm from unwanted excursion or rocking during plosives or impact, providing substantial protection against high frequency handling noise. Cutting-edge cartridge manufacturing methods utilise ultra-sonic and internal laser welding to provide best-in-class mechanical reliability. Neodymium magnet resides in a micro-injection mold of aerospace SoftMag material that maximises the magnetic field for maximum output level. Dent-resistant, hardened carbon-steel grille design lined with hydrophobic woven fabric provides exceptional plosive and wind protection, while offering virtually waterproof protection. Aluminium handle with brushed nickel or black finish PLEASE NOTE: If purchasing please send message for current stock availability. https://www.shure.co.uk/products/microphones/ksm8

    Microphones
    3 weeks ago 6 comments
    €395
  • Neve 1073dpd

    3 The 1073DPD combines two of our world-famous Class A Neve 1073 microphone preamplifiers with flexible 192kHz digital output capabilities, for modern recording environments all in a single rackspace. This classic design is the consummate mic pre for capturing vocals and musical instruments, with the added convenience of direct output to hard disk recorders or computers, thanks to the high-quality Neve-designed analogue-to-digital converters. For those who dont already know its legacy, the big, punchy sound of the mic 1073 preamp complements any musical genre, from rock to pop, hip-hop to rap, thrash to classical. Its lush sound with classic Neve signature makes it the consummate mic pre for recording vocals, guitars, and all acoustic instruments. With the 1073DPD, two Neve 1073 mic preamplifiers are complemented by superb Neve-designed analogue-to-digital converters that can capture a performance in any required format. In addition to Neve's famous Class A analogue, outputs are a series of digital options, including all standard PCM sampling rates up to 192kHz, selectable via convenient front-panel controls. A unique feature is the Neve DSD (Direct Stream Digital) output, providing unsurpassed quality beyond PCM technology. Despite its power, the 1073DPD is remarkably simple to operate. Two rear-panel Mic inputs and Line inputs feed dual Class A gain stages, with adjustable Gain control and selectable 48V available on the Mic inputs. Class A analogue outputs in XLR format are also found on the rear panel, controlled via adjustable front-panel 10dB Trim controls. Analogue insert points are provided ahead of the A/D converters, ensure the classic Neve sound is retained. The combination of legendary analogue circuitry and superior digital quality makes the 1073DPD the obvious choice as a front-end for recording to digital workstations. PLEASE NOTE: If purchasing please send message for current stock availability. http://www.ams-neve.com/products/outboard/1073dpd-stereo-mic-preamp http://ams-neve.com/news-and-events/award-winning-neve-1073-mic-preamp https://www.adverts.ie/shops/audio-warehouse/

    €2,500
  • Multipair Cables

    3 Individually jacketed and numbered multipair audio cables, any length. Currently available the following, ad price is nominal 16 pair 8.00 per mt 24 pair 12.00 per mt Speaker 2 x 2.5sq 2.00 per mt Speaker 4 x 1.5sq 3.00 per mt Speaker 4 x 2.5sq 5.00 per mt Also the following but in 100mt rolls only Microphone Star Quad 65.00 per 100mt Instrument Cable 55.00 per 100mt https://www.adverts.ie/shops/audio-warehouse/

    Cables
    3 weeks ago 23 comments
    €5.50
  • Irig Mic Field

    3 Make professional audio/video recordings everywhere you go Now anyone can make high-quality stereo recordings while on the move: Introducing iRig Mic Field, the pocket-sized digital stereo microphone for Apples range of Lightning-compatible iPhone, iPad and iPod touch devices. PLEASE NOTE: If purchasing please send message for current stock availability. https://www.ikmultimedia.com/products/irigmicfield/index.php?p=info

    Microphones
    3 weeks ago 8 comments
    €99
  • Blue Hummingbird

    3 Hummingbird - Small diaphragm condenser microphone PREMIUM SOUND. HEAD-TURNING PERFORMANCE. Hummingbird is a versatile, precision-engineered Class A small-diaphragm microphone that unlocks the tonal nuances of your instruments so you can capture the best recordings possible. With a 180 degree rotating head, Hummingbird fits into tight spaces and can nimbly change positions where others cant. Featuring a precisely tuned diaphragm based on our acclaimed B1 capsule, Hummingbird is ultra-responsive and delivers extended frequency response. Hummingbird is the perfect studio and stage solution for drum overheads, acoustic guitar, piano, percussion, or any other instrument with fast transients and rich overtones. The only thing it wont do is pollinate your gardenwere still working on that technology. PLEASE NOTE: If purchasing please send message for current stock availability. http://www.bluemic.com/hummingbird/ https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    3 weeks ago 0 comments
    €200
  • Star Quad

    3 Premium grade Star Quad Microphone Cable. Far better immunity from interference and noise than standard Mic cable. In drums of 100mt. length. 70.00 each Also available premium grade Instrument Cable, 100mt reels, 65.00 each

    Cables
    3 weeks ago 9 comments
    €70