Browse categories

Audio Warehouse

THE SOUND SPECIALISTS

Member since:
17/08/2012
Last online:
25/09/2018
Location:
Raheny, Dublin

Activity

Active:
126
Sold out:
31
Withdrawn:
154
Units sold:
165

Feedback Score [30]

  • Bss Ar133

    3 AR-133 Active DI Box / Line Balancer The Active Direct Inject box shall provide a transformer balanced and isolated feed from a source input via a 1/4" TRS jack or 3-pin XLR-type connector. The output of the DI box shall be via an XLR connector. The unit shall also provide a 1/4" TRS jack in parallel with the input to act as a link for line bridging. The link shall be a direct feed from the input, or shall optionally be fed from an actively buffered input signal. The unit shall be powered either via a phantom power source, or via a standard PP3 type 9 volt battery. An led shall illuminate continuously to show power is provided by a phantom source, or flash approximately every 2 seconds if powered by the battery. Switches shall be provided for: EARTH LIFT (output pin 1 disconnected from unit ground), INPUT ATTENUATION (of 0, 20 or 40dB), and Power On/Off. The unit shall be housed in an aluminium extrusion fitted with isolating side-cheeks. The unit shall be sufficiently screened so it is not susceptible to external magnetic fields. https://www.adverts.ie/shops/audio-warehouse/ http://www.audiowarehouse.ie/

    €135
  • C547

    3 AKG C547BL Boundary Layer microphone http://www.akg.com/site/products/powerslave,id,241,pid,241,nodeid,2,_language,EN.html https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    4 weeks ago 0 comments
    €250
  • C562bl

    3 NOS ( new old stock ) AKG C562BL solid plate style Boundary layer Microphone. https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    4 weeks ago 0 comments
    €250
  • Moog Etherwave Theremin

    3 The theremin is one of the oldest electronic instruments, and the only one known that you play without touching. Moving your hands in the space around its antennas controls pitch and volume. The Etherwave is an authentic adaptation of inventor Lev Termen's original design. The Etherwave is a quality musical instrument designed for ruggedness and portability. It has a five-octave pitch range and reliable spacing between notes for sophisticated playability. Antennas are nickel-plated 3/8" brass tube and cabinets are furniture-grade hardwood, finished with a custom Moog stain. The Etherwave is fitted with an adapter for mounting on a standard microphone stand and works best with Moog's TB-15 instrument amplifier. All Etherwaves ship with two video tutorials on one DVD: Clara Rockmore: the Greatest Theremin Virtuosa and Mastering the Theremin, featuring Lydia Kavina. http://www.moogmusic.com/products/etherwave-theremins/etherwave-theremin-standard https://www.youtube.com/watch?feature=player_embedded&v=lJ6VaOxadRQ www.audiowarehouse.ie https://www.adverts.ie/shops/audio-warehouse/

    €469
  • Moog Mf-103

    3 The MF-103 12-stage phaser is a direct descendant of the original Moog modular synthesizers, yet can be used with any instrument level to line level signal. It contains two compete modular functions: a 6 or 12-stage phaser with resonance control, and wide range LFO with amount control. The 12-Stage Phaser's control parameters are Sweep frequency, Resonance, LFO Rate and LFO Amount. All of these parameters can be controlled by the great feeling knobs that beg to be tweaked as well as expression pedals or external control voltages. Panel switches select ranrge of LFO Rate and 6 or 12 stage phasing. 1/4" jacks are provided for audio input and outputs, pedal/control inputs, LFO out and auxiliary sweep input for bi-phase effects. The heavy-duty yet smooth-acting bypass switch allows tabletop or floor use. A phaser is a type of comb filter, so called because its frequency response has several dips and peaks, like the teeth of a comb. As the phaser response sweeps back and forth across the frequency spectrum, the harmonics of the audio input signal are alternately increased and decreased. This produces the classic phaser "whooshing" sound. Phasing is one of the best ways to impart motion to a track and to make sounds come alive. With the MF-103 Phaser you can get swirling, shimmering, vibrating effects; fill up a whole stage from one sound source; even create brand new sonic textures. The MF-103 produces two comb-filter responses. They are called 6-Stage and 12-Stage, because of the number of phase-shifting circuits that are used internally. The 6-Stage mode has three dips in its frequency response, while the 12-Stage mode has six dips. These two modes have distinctly different sound qualities. In addition, the MF-103 features a variable feedback circuit which increases the resonance, or depth of the phaser sound. http://www.moogmusic.com/products/moogerfoogers/mf-103-12-stage-phaser https://www.youtube.com/watch?feature=player_embedded&v=XFQ1MzcFCOc www.audiowarehouse.ie https://www.adverts.ie/shops/audio-warehouse/

    €299
  • Moogfooger Mf102 Ring Modulator

    3 The MF-102 Ring Modulator is a direct descendant of the original Moog modular synthesizers. It contains three complete modular functions: a ring modulator, a voltage-controlled carrier oscillator, and voltage-contolled dual-waveform LFO. It can be used to process any instrument-level to line-level signal. A ring modulator produces sum and difference frequencies between the audio input and a carrier oscillator. The ring modulator's LFO can be used to modulate the carrier frequency. The moogerfooger ring modulator can create effects ranging from subtle tremolo to harmonically rich distortion, gong-like sounds, sweeps, swoops, and divebombs. It can be subtle, or outlandish in it's use - you decide! The moogerfooger ring modulator's control parameters are signal mix, carrier frequency, LFO rate, and LFO amount. All of the ring modulator's parameters can be controlled by the great feeling knobs that beg to be tweaked as well as with expression pedals or external control voltages. Panel switches select LFO waveform and carrier frequency range. 1/4" jacks are provided for audio input and output, pedal/control inputs, carrier input and carrier output. The heavy-duty yet smooth acting bypass switch allows tabletop or floor use. Imagine that the ring modulator's carrier oscillator is producing a 500 Hz sine wave, and your input signal is a 100 Hz sine wave. The ring modulator's output will be a complex waveform. You will hear two pitches: 400 Hz and 600 Hz. You will not hear your original input or the carrier oscillator. http://www.moogmusic.com/products/moogerfoogers/mf-102-ring-modulator https://www.youtube.com/watch?feature=player_embedded&v=cM2NwYrzL3Q https://www.adverts.ie/shops/audio-warehouse/ http://www.audiowarehouse.ie/

    €279
  • Rode Nti Kit

    3 Large 1" condenser capsule with gold-plated membrane Cardioid polar pattern Internal Rycote Lyre based capsule shock mounting system Ultra-low noise, self noise of only 4.5dB (A) State-of-the-art surface mount electronics Available with included RM2 mount (NT1-SINGLE) or with SMR shock mount (NT1-KIT) 10 year extended warranty when you register your microphone. http://en.rode.com/microphones/nt1# https://youtu.be/PwOYTt7Y-Uc

    Microphones
    1 month ago 11 comments
    €215
  • Rode Nt Usb

    3 High quality studio microphone with the convenience of USB connectivity Pop shield, Tripod desk stand, ring mount, storage pouch and 6m (20) USB cable included 3.5mm stereo headphone jack for zero-latency monitoring Direct mix control between mic input and source output Compatible with Apple iPad Two year extended warranty when you register your microphone The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over. It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RDE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit. The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input. A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard B, T or P sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8 thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use. http://en.rode.com/microphones/nt-usb https://youtu.be/bqEFNaRlE9k https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 month ago 51 comments
    €140
  • RODE Podcaster

    3 The RDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface. Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether. A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo. The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation. The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality. It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband. The Podcaster includes a sturdy RM2 microphone ring mount. For professional applications the optional PSM1 shock mount and PSA1 boom arm are highly recommended. https://www.youtube.com/user/rodemicrophones http://www.rode.com/ https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 month ago 1 comments
    €155
  • Rode Sc1

    3 The SC1 is a premium shielded extension cable for the smartLav and smartLav+ TRRS microphones. Measuring 6m/20', the SC1 features gold plated contacts for superior audio reproduction. http://en.rode.com/accessories/sc1 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 month ago 7 comments
    €20
  • Rode Broadcaster

    3 HF2 1 capsule with gold plated diaphragm On-Air indicator LED Ultra-low noise Voice tailored low-cut feature Internal pop-filter 10 year extended warranty when you register your microphone The RDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications. Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded. The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power. The RDE Broadcaster microphone is designed and made in Australia, and covered by RDE Microphones' industry leading 10 year warranty. http://en.rode.com/microphones/broadcaster https://youtu.be/o3hDl3v-LQA https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 month ago 0 comments
    €285
  • Rode Sc3

    3 The SC3 is a high-quality shielded adaptor, designed to allow the smartLav to connect to 3.5mm TRS devices such as cameras and audio recorders. The gold-plated contacts are colour coded, with grey indicating the TRRS input. http://en.rode.com/accessories/sc3 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 month ago 13 comments
    €15
  • Rode Sc2

    3 The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use. It is ideal for connecting the output of an Apple iPhone using a RDE i-XY microphone to a DSLR or video camera for capturing scratch audio to camera while the iPhone records the broadcast-quality track. http://www.rode.com/accessories/sc2 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 month ago 0 comments
    €15
  • Rode Sc4

    3 The SC4 is a high-quality shielded adaptor, designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets. This is ideal for users wanting to connect their RDE VideoMic to their iPhone, and record using the RDE Rec app for iOS. The gold-plated contacts are colour coded, with grey indicating the TRRS output. While the SC4 was designed to operate with Apple iOS devices such as the iPhone and iPad, it is compatible with the majority of Android devices on the market. Note that the SC4 is compatible with stereo microphones, with both left and right channels combined to a mono signal to be compatible with TRRS. http://www.rode.com/accessories/sc4 https://www.facebook.com/AudioWarehouseltd/ https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 month ago 18 comments
    €15
  • Rodesc6

    3 The SC6 is an input/output breakout box for smartphones and tablets. With two TRRS inputs and one stereo headphone output, the unit connects to any TRRS device and allows the use of one or two smartLav microphones as well as headphones for monitoring and playback. With the SC6 users can monitor audio from the smartLav, as well as input two smartLavs into the one mono channel in interview or dual-dialogue scenarios. (Note that the two microphone inputs will be recorded to the same channel) http://en.rode.com/accessories/sc6 https://www.adverts.ie/shops/audio-warehouse/ www.audiowarehouse.ie

    Microphones
    1 month ago 6 comments
    €15
  • Rode Minifur Lav

    3 The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions. The MINIFUR-LAV is supplied in a pack of three http://en.rode.com/accessories/minifur-lav https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 month ago 7 comments
    €17.50
  • Rode Smartlav+

    3 Latest version of the Smartlav + by RODE. Broadcast quality, professional-grade Lavalier Mic with TRRS Jack High-quality omni-directional condenser capsule Discrete 4.5mm miniature microphone Compatible with iOS devices and select Android devices* Kevlar reinforced cable Includes wind shield and durable mounting Clip The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment. With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RDE Rec app for iOS, or any other audio app of their choice. By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation. A foam pop shield is supplied to minimise wind noise and vocal plosives (hard b, t and p sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions. The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RDEs RDE Rec app for Apple iOS devices. RDE Rec turns the users iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app. https://www.youtube.com/user/rodemicrophones http://www.rode.com/ https://www.adverts.ie/shops/audio-warehouse/

    €64
  • Rode Smartlav+

    3 Latest version of the Smartlav + by RODE. Please see our other ad's for remaining stock of the original version at knockdown prices!! Broadcast quality, professional-grade Lavalier Mic with TRRS Jack High-quality omni-directional condenser capsule Discrete 4.5mm miniature microphone Compatible with iOS devices and select Android devices* Kevlar reinforced cable Includes wind shield and durable mounting Clip The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment. With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RDE Rec app for iOS, or any other audio app of their choice. By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation. A foam pop shield is supplied to minimise wind noise and vocal plosives (hard b, t and p sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions. The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RDEs RDE Rec app for Apple iOS devices. RDE Rec turns the users iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app. https://www.youtube.com/user/rodemicrophones http://www.rode.com/ https://www.adverts.ie/shops/audio-warehouse/

    Microphones
    1 month ago 49 comments
    €64
  • Rode Ntg 2

    3 Broadcast sound quality Low noise circuitry Condenser transducer Rugged metal construction Two step High Pass Filter (Flat/80Hz) P48 phantom power or AA battery option Low handling noise Low weight - 161g (5.17 oz.) Includes mic clip, wind shield and zip case Ideal for professional applications within the film, video, television and production industries 10 year extended warranty when you register online at www.rodemic.com/warranty The RDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications. http://en.rode.com/microphones/ntg-2 https://youtu.be/34T-Q0TZQVI

    €185
  • Rode Ntg 2

    3 Broadcast sound quality Low noise circuitry Condenser transducer Rugged metal construction Two step High Pass Filter (Flat/80Hz) P48 phantom power or AA battery option Low handling noise Low weight - 161g (5.17 oz.) Includes mic clip, wind shield and zip case Ideal for professional applications within the film, video, television and production industries 10 year extended warranty when you register online at www.rodemic.com/warranty The RDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications. http://en.rode.com/microphones/ntg-2 https://youtu.be/34T-Q0TZQVI

    Microphones
    1 month ago 0 comments
    €185
  • Rode Videomic

    3 Studio recording quality Condenser microphone Super-cardioid polar pattern 9V battery power Integrated Rycote Lyre shock mounting Two step High Pass Filter (Flat/80Hz) Three step PAD (0, -10, -20dB) Rugged reinforced ABS construction Windshield included 3.5mm mini-jack output Integrated cold-shoe mount (3/8 thread) 10 year extended warranty when you register your microphone http://en.rode.com/microphones/videomic https://youtu.be/9tPLA6qbyuU

    Microphones
    1 month ago 2 comments
    €85