Browse categories

East-West Guitars 

Quality Replacement Parts

Member since:
17/04/2015
Last online:
13/12/2018
Location:
Rathfarnham, Dublin

Activity

Active:
204
Sold out:
28
Withdrawn:
89
Units sold:
833

Feedback Score [283]

  • Fender Jazz Bass Pre-wired Harness With V-Treb Volume Mod

    3 Direct replacement harness for Fender USA Jazz bass from 1962 onwards. Drop-in upgrade for Mexican JB's, Squier and similar models. Will also work with Fender Deluxe PJ Bass. Specifications: 250K Emerson PRO CTS Solid Shaft Potentiometers w/ (3/8") .375" Shaft Potentiometers, Tolerance 8% (Matched) 2x PMT V-Treb variable treble circuit Soviet Union K-42Y-2 0.047uF paper in oil capacitor. NOS (new old stock) Switchcraft 1/4" Mono Input Jack (Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life) Professionally soldered using 22 AWG vintage push-back wire and 18 AWG Buss Wire *Control knobs not included The all new V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Turning the trim pot 1/4 turn clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot 1/4 turn counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €75
  • Fender Jazz Bass Pre-wired Harness (Right or Left Handed)

    3 Direct replacement harness for Fender USA Jazz bass from 1962 onwards. Drop-in upgrade for Mexican JB's, Squier and similar models. Will also work with Fender Deluxe PJ Bass. Specifications: 250K Emerson PRO CTS Solid Shaft Potentiometers w/ (3/8") .375" Shaft Potentiometers, Tolerance 8% (Matched) Emerson Custom Treble Bleed for each volume pot Soviet Union K-42Y-2 0.047uF paper in oil capacitor NOS (new old stock) Switchcraft 1/4" Mono Input Jack (Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life) Professionally soldered using 22 AWG vintage push-back wire and 18 AWG Buss Wire **If you require a left handed harness please nominate after purchase. The left handed model uses split shaft pots but are supplied with brass adapters for knobs with set screws. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €65
  • Fender Precision Bass Pre-Wired Harness (Right or Left Handed)

    3 Fender Precision Bass Pre-Wired Harness Replacement wiring harness for Fender USA instruments, drop in upgrade for Fender Mexico basses, Squier and Affinity and Frender Mustang bass. Will also fit any bass based on the Fender design. The pots and jack are imperial sized parts so you will need to widen metric sized holes slightly. Specifications: Emerson Custom CTS 250k Solid Shaft w/.250" Shaft Potentiometers (Matched pair) Switchcraft 1/4" Mono Input Jack (Soldered connections to the input jack are insulated with heat-shrink to ensure durability and long life) 0.047uf K42Y-2 Paper in Oil Capacitor Emerson Treble Bleed/Volume Mod 22 AWG vintage push-back wire, 18 AWG Buss Wire Solderless connectors available upon request **If you require a left handed harness please nominate after purchase. The left handed model uses split shaft pots but are supplied with brass adapters for knobs with set screws. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €55
  • Fender Stratocaster Premium Wiring Kit

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Everything you need to re-wire your Fender Stratocaster yourself or for your upgrade project. May fit Far Eastern guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are made in USA by Emerson Custom. Check other listings in the shop for information and specs on these potentiometers and capacitors. Kit includes: - (3) 250K Emerson PRO Split Shaft w/.375" (3/8") Shaft Length (audio taper/logarithmic) potentiometers (same price if you require 500K pots) - (1) Genuine Oak Grigsby 5-Way Switch - (1) Switchcraft 1/4" #11 Mono Input Jack - (1) 0.047uf/47nF K42Y-2 PIO (Paper in Oil) capacitor NOS (Tested within the 10% range) - (1) Emerson Custom Treble Bleed - 1ft 22AWG white vintage push back wire (pre-tinned) - 1ft 22AWG black shielded, vintage push back wire (pre-tinned) - 0.5ft 20AWG ground bus wire - Wiring Diagrams if requested **Switch Tip and Control Knobs Not Included** Options: - If you'd prefer a 0.022 PIO capacitor add 5.00 to your order Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. If the customer is within a reasonable range collection of items may be available to them otherwise it is probably just as cheap to post the item.

    €45
  • Fender Telecaster Premium Wiring Kit

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Everything you need to re-wire your Fender Telecaster yourself or for your upgrade project. May fit Far Eastern guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are made in the USA by Emerson Custom. Check other listings in the shop for information and specs on these potentiometers and capacitors. Kit includes: - (2) Emerson PRO Solid Shaft w/.375" (3/8") Shaft Length (audio taper/logarithmic) potentiometers - (1) Genuine Oak Grigsby 3-Way Switch - (1) Switchcraft 1/4" #11 Mono Input Jack - (1) 0.047uf/47nF K42Y-2 PIO (Paper in Oil) capacitor NOS (Tested within the 10% range) - (1) Emerson Custom Treble Bleed - 2ft 22AWG black and white vintage push back wire (pre-tinned) - 0.5ft 20AWG ground bus wire **Switch Tip and Control Knobs Not Included** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. If the customer is within a reasonable range collection of items may be available to them otherwise it is probably just as cheap to post the item.

    €38
  • Switchcraft Pre-Wired 3-Way Toggle Switch (Shielded Braided Cable)

    3 Wiring the switch is the most difficult part when re-wiring a Gibson Les Paul not to mention very time consuming. Our pre-wired switch remove the hassle of this job meaning you only need to connect the wires to your pots and jack. Choice of short or long switch Professionally soldered and covered with heat shrink tubing. All connections are reinforced with heat shrink wrap for durability and strength.

    €35
  • Carling DPDT On/On Mini Toggle Switch

    3 Premium mini toggle switches. Used for phase reversal, series/parallel wiring, coil splitting humbuckers, pickup switch (on/off) etc. Made in USA Double Pole/Double Throw switch 2A 250VAC 5A 125VAC Includes a flat locking washer and two hex mounting nuts for custom height adjustment 0.354" bushing length, " mounting hole diameter, 0.354" bushing length. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €5.95
  • Carling SPDT On/On Mini Toggle Switch

    3 Premium mini toggle switches. Use for pickup switches (on/off), mods on a 5-way lever switch etc. Made in USA. " mounting hole diameter, 0.354" bushing length. Single Pole/Double Throw Switch 2A 250VAC 5A 125VAC Includes a flat locking washer and two hex mounting nuts for custom height adjustment Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €3.95
  • Miyama 3 Way Mini Toggle Switch, 2 Pole, (ON-OFF-ON) Nickel

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €9.75
  • Miyama 3-Way Mini Toggle Switch, 2 Pole, (ON-OFF-ON) Gold

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €11.95
  • Miyama 3-Way Mini Toggle Switch, 2 Pole, (ON-OFF-ON) Black

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €12.50
  • Miyama 3-Way Mini Toggle Switch, 2 Pole, (ON-ON-ON) Nickel

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. DPDT Switch (Double Pole, Double Throw) Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €9.75
  • Miyama 3-Way Mini Toggle Switch, 2 Pole, (ON-ON-ON) Gold

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. DPDT Switch (Double Pole, Double Throw) Flat Lever Type Made in Japan by Miyama Electric Co Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €15.95
  • Miyama 2-Way Mini Toggle Switch, 2 Pole, (ON-ON) Gold

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch, pickup On/Off switch etc. DPDT Switch (Double Pole, Double Throw) Flat Lever Type Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €15.95
  • 2-Way Mini Toggle Switch, Single Pole, (ON-ON) Gold

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, coil tap or coil split etc. SPDT Switch (Single Pole, Double Throw) Chromed nickel post with gold lacquered lock washers and nut Made in South Korea Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €6.95
  • Miyama 2-Way Mini Toggle Switch, 2 Pole, (ON-ON) Black

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch, pickup On/Off switch etc. DPDT Switch (Double Pole, Double Throw) Flat Lever Shaft Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €10.95
  • 2-Way Mini Toggle Switch, Single Pole, (ON-ON) Black

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, coil tap or coil split etc. SPDT Switch (Single Pole, Double Throw) Chromed nickel post with black lacquered lock washers and nut Also has nickel washer and nut in pack. Made in South Korea Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €5.95
  • Deep Thread Knurled Nut for Switchcraft 3-Way Toggle Switches (Nickel or Gold)

    3 EP-4923-002 Deep thread round nut for Switchcraft toggle switches This can be used as an alternative to the flat nut that comes standard with Switchcraft toggle switches but the main purpose is if you don't have enough thread height on the bushing to extend beyond the surface of the guitar. Some people think it gives a more desirable finish because it allows the toggle switch tip to be recessed deeper under the surface of the guitar top. Outside edge diameter 5/8" Inside diameter 7/16" Collar 15/32" 32 SAE thread Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Item must be returned in an un-used state and in the original packaging. **Purchase with confidence that the excess cost of postage which seems to add up here in Adverts shopping cart when buying multiple items is refunded immediately after transaction.

    €4.95
  • Switchcraft Angled 3-Way Toggle Switch for Gibson SG, Fender Jazzmaster

    3 Reliable, heavy-duty switch for SG and thin 2-pickup guitars. Switchcraft has been the standard in Gibsons and other great American guitars for decades. Chrome right-angle toggle switch for Gibson SG, PRS, Epiphone and similar guitars. Upgrade from noisy metric switches. Dimensions: -Switch length 2" (50.80mm) -Threaded portion 3/16" (4.76mm) -Required mounting hole dia. 15/32" (11.78mm) 1/2" (12.6mm) if recessed nut required -Required body cavity depth 13/16" (20.64mm) -Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. SWITCH TIP NOT INCLUDED! **NOTE** Switchcraft pre-tins all lugs with solder from the factory making things easier for you to make your connections especially for the switch ground. Reaming of the receiving hole will be required on Far Eastern imported guitars. For guitars where the switch mounts through the body you will need a deep threaded round nut. These are also available from East-West Guitars. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. . **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €18.95
  • Switchcraft Long Straight Type 3-Way for 3x Pickup guitars

    3 Replacement Tall toggle switch for Les Paul Custom guitars with 3-pickups The long straight toggle is recommended for most USA made guitars such as Gibson Les Paul USA with a carved top. It is the highest quality and most reliable open frame switch available. These have silver contact tips for noise-free and reliable operation and a longer lifespan than cheap Far Eastern imported switches. Includes a standard nut for mounting. **For guitars where the switch mounts through the body, you will need to purchase a deep threaded round nut separately. These are also available from East-West Guitars. Dimensions: -Overall length 2, 9/64" (54.50mm) -Threaded portion 3/16" (4.76mm) -Required mounting hole dia. 15/32" (11.78mm) 1/2" (12.6mm) if recessed nut required -Required body cavity depth - at least 1,1932in (40.64mm) -Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. SWITCH TIP NOT INCLUDED! **NOTE** Switchcraft pre-tins all lugs with solder from the factory making things easier for you to make your connections especially for the switch ground. Reaming of the receiving hole will be required on Far Eastern imported guitars. For guitars where the switch mounts through the body you will need a deep threaded round nut. These are also available from East-West Guitars. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €23.95
  • Switchcraft Long Straight 3-Way Toggle Switch for Gibson guitars

    3 Tall toggle switch for Gibson Les Paul guitars The long straight toggle is recommended for most USA made guitars such as Gibson USA. It is the highest quality and most reliable open frame switch available. These have silver contact tips for noise-free and reliable operation and a longer lifespan than cheap Far Eastern imported switches. Includes a standard nut for mounting. **For guitars where the switch mounts through the body, you will need to purchase a deep threaded round nut separately. These are also available from East-West Guitars. Dimensions: -Overall length 2, 9/64" (54.50mm) -Threaded portion 3/16" (4.76mm) -Required mounting hole dia. 15/32" (11.78mm) 1/2" (12.6mm) if recessed nut required -Required body cavity depth - at least 1,1932in (40.64mm) -Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. SWITCH TIP NOT INCLUDED! You may also need a deep knurled nut for these which are available from my shop. **NOTE** Switchcraft pre-tins all lugs with solder from the factory making things easier for you to make your connections especially for the switch ground. Reaming of the receiving hole will be required on Far Eastern imported guitars. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €19.95