Browse categories

East-West Guitars 

Quality Replacement Parts

Member since:
17/04/2015
Last online:
22/11/2019
Location:
Rathfarnham, Dublin

Activity

Active:
193
Sold out:
35
Withdrawn:
99
Units sold:
1040

Feedback Score [350]

  • Emerson Custom/CTS 250K Potentiometer Short (3/8") Split Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson PRO CTS - 250K Short (3/8") Split Shaft Potentiometer - 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. - Typically used on Strat style guitars with single coil pickups, but can be used on any guitar that requires a 250K Split Shaft Potentiometer. Emerson Pro CTS pots from Emerson Custom are designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. We take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Material: Long life brass Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3830 1536 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Emerson Custom/CTS 500K Potentiometer Short (3/8") Split Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson Pro CTS 500K Potentiometer Short (3/8") Split Shaft Audio Taper pot. - 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. - Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's and many other models of guitars, but can be used on any guitar that requires a 500K Split Shaft Potentiometer. Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed the stated tolerances listed here. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON FAR EASTERN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3834 1536 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Emerson Custom/CTS 250K Potentiometer Short (3/8") Solid Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson Pro CTS 250K Potentiometer Short (3/8") Solid Shaft Audio Taper pot. - 3/8" Solid Shaft for use with (1/4) US Spec set-screw knobs. - Typically used on Tele Style Guitars with Single Coil Pickups Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. These are some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: ROUND SOLID SHAFT Shaft Diameter: 0.250 (6.35MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECEIVING HOLES MAY BE NEEDED!*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3831 1502 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Emerson Custom/CTS 500K Potentiometer Short (3/8") Solid Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson Pro CTS 500K Potentiometer Short (3/8") Solid Shaft Audio Taper pot. - 3/8" Solid Shaft for use with (1/4) US Spec set-screw knobs. - Typically used on Tele Style Guitars with Humbucker or P90 Pickups, but can be used on any guitar that requires a 500K Solid Shaft Potentiometer. Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed our stated tolerances. We take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: ROUND SOLID SHAFT Shaft Diameter: 0.250 (6.35MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECEIVING HOLES MAY BE NEEDED!*** More than 10 available. Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3832 1432 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Emerson Custom/CTS 500K Potentiometer Long (3/8") Split Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson PRO CTS - 500K Long (3/4") Split Shaft Potentiometer - 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. - Typically used on Carved Top Les Pauls, but can be used on any guitar that requires a 500K Long Split Shaft Potentiometer. Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. They also feature a tighter 8% resistance tolerance compared to CTS products offered by most other suppliers. Each and every Emerson Pro CTS pot is hand tested to ensure that they meet or exceed their stated tolerances. They take great pride in offering some of the best, most consistent potentiometers on the market today. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/4 (19.05MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON FAR EASTERN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3833 1504 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €9.95
  • Emerson Custom/CTS 1 Meg Ohm, Short (3/8") Split Shaft Potentiometer

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson PRO CTS - 1 Mega Ohm Short (3/8") Split Shaft Audio Potentiometer - 1/4" split shaft for fine-knurled (24-spline) US Spec knobs. - Typically used on Fender Style guitars with single coil pickups (i.e.: Jazzmasters, Jaguars, etc) but can be used on any guitar that requires a 1 Meg Split Shaft Potentiometer. Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3888 1510 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately** .

    €8.95
  • Emerson Custom/CTS 1 Meg Ohm, Short (3/8") Solid Shaft Potentiometer

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Emerson PRO CTS - 1 Mega Ohm Short (3/8") Solid Shaft Potentiometer - 3/8" Solid Shaft for use with (1/4) US Spec set-screw knobs. - Typically used on Fender Style Guitars with Single Coil Pickups (i.e.: Jazzmasters, Jaguars, etc) - 10% Tolerance - Custom Designed Audio Taper - Brass shaft and bushing - 3/8" Shaft for Mounting on Pickguards, Control Plates or flat top guitars (Includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment) Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. Specifications: Shaft Style: ROUND SOLID SHAFT Shaft Diameter: 0.250 (6.35MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3887 1510 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Emerson Custom/CTS 250K Blender Potentiometer Short (3/8") Split Shaft

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. 250K BLENDER Potentiometer Short (3/8") Split Shaft. Emerson/CTS PRO AUDIO TAPER Similar in function to the Fender "No Load" pot, the Emerson Pro Blender pot is an improvement to this design idea. This pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Emerson Pro Blender pot does NOT have a detent, which means a no click feel between 9 and 10. This Blender pot is best used for true bypass tone control or Blender guitar wiring. Has a specially designed custom taper so the "blending" is seamless and very intuitive. - 10% Tolerance - Custom Designed Audio Taper - Brass shaft and bushing - 3/8" Shaft for Mounting on Pickguards, Control Plates or flat top guitars (Includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment) Emerson Pro CTS pots from Emerson Custom were designed to be the premium choice for the discerning guitarist looking for the optimum performance and tonal response from a guitar potentiometer. These specially designed Emerson Pro CTS feature a longer-life brass shaft and bushing. Emerson Pro CTS pots have a proprietary custom audio taper that was specially designed by Emerson Custom to give you a very smooth and accurate response when you roll up and down on the controls. These pots will give you a much more responsive taper than what you'll get with economy or even standard issue CTS pots. Crank your guitar up to 10 and the volume swells all the wayno abrupt flattening to choke your playing style. Clarity and Precision define this Series of Premium Potentiometers by Emerson Custom. Each Emerson Pro CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity. SWITCH & BLENDER POT FUNCTION IN STRATOCASTER WITH 5-WAY SWITCH: Blender Pot on 10: Position 1: Bridge Position 2: Bridge & Middle Position 3: Middle Position 4: Middle & Neck Position 5: Neck Blender Pot on 1: Position 1: Bridge w/ Neck Pickup Faded in Position 2: Bridge & Middle w/ Neck Pickup Faded in Position 3: Middle Position 4: Middle & Neck w/ Bridge pickup Faded in Position 5: Neck w/ Bridge Pickup Faded in ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Brand: Emerson/CTS Pro Line Country/Region of Manufacture: United States MPN: 450S3845 1436 Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €9.95
  • Fender, No-Load Potentiometer, 250K, Solid Shaft

    3 Genuine Fender 250K ohm, Split Shaft, no load potentiometer. Some Fender guitars have a unique tone circuit that features a "Delta Tone' Control. The "Delta Tone' system consists of a high output bridge pickup and special 'no-load' tone control for the middle and bridge pickups. This new pot has a detent at the 10 position which bypasses completely any filtration through capacitors. Unlike the TBX, which [has] a detent at the 5 position and gradually reduce[s] the amount of filtration through the capacitor, the Delta-Tone's 'no-load' feature eliminates filtration completely at the detent and the result is more of the direct presence of the pickup. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an unused state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

    €10.95
  • CTS 250K Left Handed Potentiometer. Reverse Audio Logarithmic. Split Shaft

    3 This pot will allow you to wire your guitar up the correct way if you are a left handed player. Potentiometers on left handed guitars usually can only be operated in an anti-clockwise fashion which is a nightmare for some players or with a reverse wiring with a standard pot with the wires simply reversed which is not correct at all as it will reverse the resistance taper. This pot is the answer and will allow the player to engage the control in a clockwise manner when turning it up. From Allparts USA Specifications: Resistance: 250k Ohms Tolerance: +/-10% Shaft Material:Aluminum Pot casing: Dimpled back Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • CTS 500K Left Handed Potentiometer. Reverse Audio Logarithmic. Split Shaft

    3 This pot will allow you to wire your guitar up the correct way if you are a left handed player. Potentiometers on left handed guitars usually can only be operated in an anti-clockwise fashion which is a nightmare for some players or with a reverse wiring with a standard pot with the wires simply reversed which is not correct at all as it will reverse the resistance taper. This pot is the answer and will allow the player to engage the control in a clockwise manner when turning it up. From Allparts USA Specifications: Resistance: 500K Ohms Tolerance: +/-10% Shaft Material:Aluminum Pot casing: Flat back Shaft Style: (24 Spline) Split Shaft, Fine Knurling Shaft Diameter: 0.234 (6.00MM) Shaft Height: 3/8 (9.52MM) Thread: 3/8 X 32 Thread Height: 3/8 (9.52MM) Required Mounting Hole: 3/8 (9.52MM) ***THESE ARE NOT METRIC COMPONENTS, SOME REAMING OF THE RECIEVING HOLES MAY BE NEEDED! ALSO, THE KNOBS ON YOUR GUITAR MAY NEED TO BE REPLACED AS THESE POTS ARE THE FINE SPLINED VARIETY AS OPPOSED TO THE COURSE SPLINES ON EUROPEAN GUITARS*** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €8.95
  • Bourns Dual MN Taper Balance/Blend Pot, With Center Detent (Various types)

    3 Choose between split shaft or solid shaft. *These are metric parts with coarse teeth so US spec knobs won't work with the split shaft option Dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. " watt, 300 rotation. " shaft diameter. Solder lugs. " bushing. M taper: 0% to 100% output voltage from 0% to 50% rotation (linear). 100% ouput voltage from 50% to 100% rotation. N taper: 100% output voltage from 0% to 50% rotation. 100% to 0% ouput voltage from 50% to 100% rotation (linear). Full output for both outputs at 50% rotation (center detent). Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €13.75
  • Alpha Potentiometer, Left-Handed taper, Solid Shaft US spec, 250K or 500K

    3 Replacement for some Fender Amplifiers. Can be used as a reverse log pot for left handed players wishing to re-wire their guitars the correct way. Solid Shaft (for Tele, P-Bass and Jazz Bass) " Bushing (US Spec) 24mm diameter Choice of resistance 250K or 500K (Please state which you require when purchasing) High friction turn Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an unused state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

    €4.95
  • DMT Dual Mode High & Low Pass Tone Control

    3 The DMT-G Tone Control is a passive dual mode tone control designed specifically for electric guitars that can operate in either HIGH PASS or LOW PASS modes greatly expanding the instruments tonal possibilities. Micro switches on the circuit board provide the user the ability to select one of two different frequency ranges for both high and low pass modes. Easy installation with no capacitors or other parts needed. Replace the tone control in you guitar with one that you will actually use! DMT-G Dual Mode Tone Control Features: Operates in Low Pass or High Pass modes. Each mode has selectable frequency range. Tuned specifically for electric guitar Works with all Single Coils & Humbuckers Completely passive-No battery needed. No affect on tone at full clockwise setting. Simple three wire installation. Dual Mode Tone Control Specs: ***Metric Spec. Potentiometer*** Shaft Material:Aluminum Shaft Type: Split Knurl Spline Count (Type): 18 (Coarse) Spline Height: 9.5mm (3/8".375") Threaded Shaft Material:Brass Threaded Shaft Length: 9.5mm (3/8" .375") Threaded Shaft Diameter: 9.5mm (3/8" .375") Thread Pitch: 9.5mm (3/8-32NEF) Required Cavity Depth:28mm (1.1") Feel free to ask questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €24.95
  • Alpha Potentiometer for Amp Repairs, 3/8" bushing (Choice of resistance value)

    3 Custom built for Mojotone by Alpha to match CTS potentiometers in quality and taper. Features include solderable back, 24mm body and 3/8" bushing with lock washer, flat washer and nut included. Can be used as an economical alternative for guitar pots. Choose from: 5K Linear 25K Linear 100K Linear 250K Linear 10K Audio 250K Audio 10K Audio 500K Audio 1M Audio

    €4.95
  • Switchcraft 1/4" Stereo Input Jack, Type 12B

    3 Stereo Switchcraft J12B Input Jack -Accepts standard 1/4" plugs. -Requires 3/8"-diameter mounting hole; -3/8 x 32 threaded portion is 1/4" long. -Mounting nut and flat washer included. -Made in the USA Industry standard in quality and design. Essential component in electric guitar builds, amplifiers and effect pedals. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Purchase with confidence that the excess cost of postage which seems to add up here in Adverts shopping cart when buying multiple items is refunded immediately after transaction.

    €4.95
  • Switchcraft #11 1/4'' Mono Input Jack

    3 Mono Switchcraft J11 Input Jack -Accepts standard 1/4" plugs. -Requires 3/8"-diameter mounting hole; -3/8 x 32 threaded portion is 1/4" long. -Mounting nut and flat washer included. -Made in the USA Industry standard in quality and design. Essential component in all electric guitar builds. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Purchase with confidence that the excess cost of postage which seems to add up here in Adverts shopping cart when buying multiple items is refunded immediately after transaction.

    €3.95
  • Entwistle HV58 Gold Humbucker Pickup (Bridge/Neck)

    3 The classic late '50s humbucker, made to original vintage specs. Enamel coated winding wire, scatterwound coils and Alnico 2 magnetics. We use an Alnico 2 bar as it provides a more diffused secondary field and behaves as if the magnet is 50 years old. Unlike modern pickups our HV58s are not vacuum processed as this reduces the natural gaps in the windings and it is theses gaps that are at the very source of the vintage sound Covered versions of the HV58 are potted in hot wax for around 60 seconds and have a slightly different tone to the open frame HV58s which are not 'potted' at all as they are designed to replicate the earliest PAF's and are fine if you use them with a classic amp (AC30, Fender Twin, Marshall 50 etc) but will have a tendency to squeal when used with modern high gain amps. DC Resistance: Bridge 7.6K Neck 7K -Four Conductor Wiring Black & Shield = Ground Green = Signal Output White & Red = Coil Split The pickup is unboxed and supplied with mounting screws and springs. Choice of Bridge or Neck Pickups If you require a set buy two items. If you require a plastic display box they are available for 3.00 extra Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €34.95
  • Entwistle X 90 'Soap Bar' Single Coil Pickup (Alnico)

    3 The X90 single coil has a flat and wide bobbin and is wound to a DCR of 8K to produce the classic vintage tone that preceded the introduction of the humbucker in 1957. The nickel pole pieces are adjustable and the cream cover completes the vintage look and feel of these pickups. String pitch at the neck position is 48mm and bridge 50mm. The X90 is available in two versions. They are; using alnico bar magnetics and ceramic bar magnetics. This is the Alnico version of the X90 single coil, which has a flat and wide bobbin, and is wound to a DCR of 8K. This means that you will get an even warmer and more vintage tone to the standard ceramic X90 to produce the classic sounds that preceded the introduction of the humbucker in 1957. The nickel pole pieces are adjustable and the cream cover completes the vintage look and feel of these pickups. String pitch at the neck position is 48mm and bridge 50mm. DC Resistance: Bridge: 8K Neck: 8K -2 Conductor Wiring *Available with choice of pickup covers, Black or Cream The pickup is unboxed and supplied with mounting screws and springs. Choice of Bridge or Neck Pickups If you require a set buy two items. If you require a plastic display box they are available for 3.00 extra Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €27.95
  • Entwistle Nemesis AFG Humbucker Pickup (Bridge/Neck)

    3 Like it's little brother the Nemesis, the Nemesis AFG pickup uses a rail pole for one coil and six individual pole pieces for the other. The asymmetric magnetic field created by these different poles results in individual tone signatures for each of the coils. Its like having two single coils, each with their own tone. When in humbucker mode the two pole types produce a bright and uniquely complex tone with plenty of power. On top of this, the Nemesis AFG adds a mix of ceramic and alnico magnets. By mixing the magnet types as well as the two kinds of poles even more variety to the tone is produced in single coil mode and more complexity in the humbucker mode. DC Resistance: Bridge: 12.5K Neck: 10.5K -Bobbins: Zebra -Gibson polepiece spacing -4 Conductor Wiring The pickup is unboxed and supplied with mounting screws and springs. Choice of Bridge or Neck Pickups If you require a set buy two items. If you require a plastic display box they are available for 3.00 extra each Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €36.50
  • Entwistle Dark Star ND Humbucker Pickup (Bridge/Neck)

    3 The ND version of the Dark Star pickup uses ultra powerful neodymium magnets making them even hotter than the standard Dark Star model. These ultra high power pickups have twin row hard nickel poles for perfect split coil balance and greater sensing area. Their overwound coils have a 16K DCR enabling them to deliver a stinging top end, warm mids, and thumping lows! It's a power pickup that still has loads of character and tone and is perfect for heavy metal and high energy rock. The Neodymium magnets increase the output power without sacrificing articulation and clarity. Choice of Bridge or Neck Pickups If you require a set buy two here If you require a plastic display box they are available for 3.00 extra DC Resistance: Bridge 16K Neck 16K -Four Conductor Wiring Black & Shield = Ground Green = Signal Output White & Red = Coil Split The pickup is unboxed and supplied with mounting screws and springs. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €29.95