Description

Condition: New

SMART TURN SYS. 2ND GEN.
AUTO.TURN SIGNAL CANCEL
When you're driving a car, it's easy, of course. The turn signal cancels itself automatically after you turn. But what about on a motorcycle? Self-cancelling isn't possible, you might think. Wrong! Because the STS Smart Turn System does exactly this job. And that can potentially be a life-saver for bikers.

All too often, motorcycle riders forget to cancel their turn signals. After all, you can easily fail to notice the acoustic or visual reminder. And this can often result in a dangerous situation, or even an accident, because other road users misinterpret the flashing turn signal. The Smart Turn System puts an end to the problem. This innovative system is suitable for all motorcycles with a mechanical turn signal switch and a flasher unit, and it's easy to connect via a universal wiring harness.

STS detects every manoeuvre: left/right turn, roundabouts and lane changes
Self-cancelling without any delay
STS is suitable for motorcycles with either LED or conventional turn signals
It also functions with resistors fitted for LED turn signals
You can still control your turn signals manually
STS is certified street-legal in Germany
It doesn't affect your motorcycle electronics
Waterproof, dustproof and heat-resistant IP67
The system is compatible with all motorcycles that come with a mechanical indicator switch. To find out if your bike has a mechanical turn signal switch, you can conduct the following test:

1. Remove the key (the ignition must be off)
2. Push the indicator switch in one direction
3. Insert the key and start the engine

It is a mechanical system if the corresponding blinkers light up.

How it differs from the 1st generation:

New, flatter housing made of polyamide
Waterproof and dustproof to IP67
In the box:

STS unit
Universal wiring harness
Connectors and fittings
Installation instructions
Please note:
Before riding an unfamiliar or borrowed motorcycle, it's a good idea to check whether it is also equipped with a Smart Turn System. Because: No STS means no self-cancelling of the turn signals!

Note: To prevent an error message on BMW motorcycles with CAN bus technology (from 2006), we recommend connecting the power supply to the free accessory slot (12V) of the CAN bus. This is located under the seat.

By the way - if you sell your motorcycle, the STS is quick and easy to remove again, so you can return the motorcycle to its original state. You can then install your STS on your new machine, and it will work perfectly again.