Fender Prosonic Amp

Fender Prosonic amp. This amp is in great condition. Just serviced before Xmas with 2 new power valves
I can't find the footswitch for it but they're easily got online.
.It has a great clean channel and a great lead channel.
It is an extremely loud amp and sounds fantastic
.
I am selling as I don`t need the power.It isn't any way as heavy as a Twin as it has 2 x 10 speakers,which are staggered to reduce size.
These amps are very difficult to find.
Made in USA.


The Prosonic introduced several features that had previously been seldom, or never before, seen in Fender amplifiers. Its most unusual feature is the switchable rectifier and power amplifier bias scheme, allowing on-the-fly changes of operating mode and output power (as well as subjective tonal differences). This feature, originally found on Randall Smith's Mesa Boogie amplifiers, allows the Prosonic to achieve a versatility very rarely seen from mass-market instrument manufacturers. The Prosonic's rear-mounted RECTIFIER/BIAS switch lets the user select from the following three options:
Solid-state rectification with fixed bias (marked "S.S. AB2"). Listed at 60 Watts R.M.S.
Tube rectification with fixed bias (marked "AB2"). Listed at 50 Watts R.M.S.
Tube rectification with cathode bias (marked "A"). Listed at 30 Watts R.M.S.
Unlike many amplifiers marketed as "Class A", the Prosonic truly functions as a Class A power amplifier in the "A" position. Class A refers to the amount of current flowing through the power tubes with zero audio signal, with Class A meaning maximum current flow even with zero signal. This makes the tubes run hotter, and gives the power section even more gain at the cost of tube life and noise. The Class-A designation for guitar amplifiers is often a misnomer, as heralded amps such as the Vox AC-30 also do not operate in a true Class-A mode. While the Prosonic featured cathode bias in the Class A mode and fixed bias in the Class AB mode, not all class A tube amplifiers are cathode-biased, and not all fixed biased amplifiers are Class AB.
A channel-switching amp, the Prosonic offers a clean channel that features a blend of traditional Fender sounds with the influence of Vox amplifiers, frequently attributed to the Class A mode. Many players praise the Prosonic's clean channel as being "softer," and more prone to break-up and musically desirable distortion, than more contemporary Fender designs.
The Prosonic also brought levels of gain (distortion) previously unavailable in a Fender amplifier. Taking a major cue from the first generation of Mesa Boogie amplifiers such as the Mark I (itself a modified Fender design), the Prosonic used additional gain stages in the preamp section that cascaded into one another. Although Fender had been designing amps with some facility for built-in distortion/overdrive since at least the late 1960s, never before had they arrived at a sound so readily usable for modern high-gain styles of music, and far removed from what many players consider to be archetypical Fender tones. The Prosonic's factory manual states, "Gain 1 functions as a standard gain stage whereas Gain 2 functions similar to a compressor, adding sustain while reducing 'edge' when the volume is increased. This channel produces great high gain sound at any volume - from bedroom to stadium."




#Fender Marshall Vox Amp Gibson Mesa Boogie Fractal Roland Laney