Description

Warranty until 2031, the amplifier is practically new It comes with the original box and all the documentation.Less than 50 hours of use.

Rated output power (20 Hz to 20 kHz, total harmonic distortion (THD) 0.07% on two channels)
90 W + 90 W at 8 Ω
150 W + 150 W at 4 Ω
Dynamic power
105 W + 105 W at 8 Ω
135 W + 135 W at 6 Ω
190 W + 190 W at 4 Ω
220 W + 220 W at 2 Ω
Audio Performance
Bandwidth (THD 0.1%, 45 W): 10 Hz to 50 kHz at 8 Ω
Damping factor (1 kHz): 250 or more at 8 Ω
Frequency response
5 Hz to 100 kHz +0 / −3 dB
20 Hz to 20 kHz +0 / −0.3 dB
Input Sensitivity and Impedance (1 kHz, 100 W / 8 Ω)
Moving coil (MC) cartridge: 150 μV RMS / 50 Ω
Moving magnet (MM) cartridge: 3.5 mV RMS / 47 kΩ
CD player (or similar source): 200 mV RMS / 47 kΩ
Main input: 1 V RMS / 47 kΩ
Maximum Input Voltage (1 kHz, THD 0.5%)
Moving coil (MC) cartridge: 2.0 mV RMS
Moving magnet (MM) cartridge: 50 mV RMS
CD player (or similar source): 2.80 V RMS
Nominal Output Voltage and Impedance
Line output 2: 200 mV RMS / 1.5 kΩ
Preamp output: 1 V RMS / 1.5 kΩ
Signal-to-Noise Ratio (JEITA, IHF-A network)
Moving coil (MC) cartridge: 90 dB
Moving magnet (MM) cartridge: 96 dB
CD player (or similar source): 110 dB
Tone Controls
Bass
Boost/cut: 50 Hz / ±9 dB
Turnover frequency: 350 Hz
Treble
Boost/cut: 20 kHz / ±9 dB
Turnover frequency: 3.5 kHz
Connectivity
1 XLR analog audio input
3 RCA analog audio inputs
1 phono input
1 line output
1 preamp output
1 main input
1 12V trigger input
1 remote control input/output
1 service port
1 IEC power socket
Physical Characteristics
Power supply: 230 V AC, 50 Hz
Power consumption
In operation: 350 W
In standby: 0.2 W
Dimensions (W × H × D): 435 × 157 × 463 mm
Weight: 22.7 kg