Description

Condition: New

Look Keo 2 Max Blade White - 8 Nm Road Pedals

RRP €119.90

Key features:

Blade technology applied to the Keo 2 Max: new clip-in/clip-out sensations, aerodynamic profile

Large and wide platform (400 mm? / 60 mm) for excellent pedalling stability and good power transfer

New spindle system providing reduced platform height (14 mm)

2 clip-out tension settings: 8 / 12

Technical specification:

USE: ROAD - FROM CYCLOSPORTTO COMPETITION

BODY: COMPOSITE

SPINDLE: CHROMOLY STEEL

THREAD: 9/16 X 20 MM

BEARINGS: 2 BALL BEARINGS, 1 NEEDLE BEARING

SPINDLE/SOLE HEIGHT: 14 MM

PEDAL / CRANK DISTANCE: 53 MM

CLEATS: GREY KEO GRIP CLEATS

ANGULAR MOVEMENT: 0?, 4.5? OR 9? DEPENDING ON CLEAT TYPE (BLACK, GREY OR RED)

PEDAL WEIGHT: 120 G. (308 G PER PAIR WITH CLEATS AND SCREWS)

COLOURS: BLACK - WHITE

ACCESSORIES: ONE PAIR OF GREY KEO GRIP CLEATS FASTENERS (6 SCREWS 5 X 11 MM AND 6 WASHERS)

Technology:

COMPOSITE MATERIAL BLADE: The Keo 2 Max Blade is made of injection-moulded composite fibreglass material providing cleaner engagement than a Keo 2 Max pedal but less radical than a Keo Blade 2. Two blade versions are offered for 2 different tension levels: version 8 and version 12. Integrating the blade into the pedal body gives the Keo 2 Max Blade and aerodynamic profile for optimal air flow.

VERY LARGE PEDAL PLATFORM AREA: With a 400 mm2 stainless steel platform, the Keo 2 Max Blade is positioned between the Keo 2 Max and the Keo Blade 2 providing excellent stability and very good pedalling efficiency. This efficiency is also made possible by permanent cleat-stop contact: the shape of the stops at the rear of the pedal has been designed to fit the shape of the rear of the Keo cleats.

TOP QUALITY SPINDLE SYSTEM: The spindle system used on the Keo 2 Max Blade is the same as that used on the Keo Blade 2: 2 ball bearings and one needle bearing thus ensuring high product reliability, besides passing tests in excess of standards* that LOOK commits to having its products subjected to 2 million cycles at 100 rpm with a 90 kg load on the centre of the pedal and eccentric rotation (the standard requiring 100,000 centred rotation cycles with a 65 kg load). This is the equivalent of a 1,700 watt sprint by Mark Cavendish at 100 rpm for 333 hours!

Q-FACTOR ADJUSTMENT: The new LOOK spindle’s 14 mm thread length enables Q-Factor to be adjusted by 2 mm using a special spacer available as a spare part.This increases from 53 to 55 mm.