Description

Condition: New

Cleanfast Scrub Clean | Low Foam Heavy Duty Floor Degreaser

Cleanfast Scrub Clean Low Foam Floor Degreaser is a powerful alkaline cleaning solution developed for heavy-duty cleaning of hard floors in demanding commercial and industrial environments. Designed to break through grease, oil, ingrained dirt and heavy everyday contamination, its low-foam formulation makes it particularly suitable for use with scrubber dryers and other professional floor cleaning machines.

Busy floors can accumulate far more than ordinary dust. Warehouses, workshops, factories, commercial kitchens, garages and heavily trafficked buildings can develop layers of oily dirt, footprints, spills and stubborn grime. A standard maintenance detergent may struggle to remove this contamination efficiently.

Cleanfast Scrub Clean provides the stronger cleaning action required for these difficult situations. Its alkaline formula penetrates and loosens heavy dirt so it can be removed from compatible hard flooring using either mechanical or manual cleaning methods.

The low-foam formulation is a major advantage when machine cleaning. Excessive foam can interfere with the recovery system of scrubber dryers, while a properly formulated low-foam detergent allows dirty solution to be collected efficiently.

Cleanfast Scrub Clean also performs effectively in hard water and is designed to leave floors clean and streak free when correctly diluted and applied.

## Powerful Heavy Duty Floor Degreaser

Greasy floors present a different cleaning challenge from ordinary dusty or lightly marked surfaces.

Oil and grease can hold additional dirt against the floor, gradually producing a dark and difficult-to-remove layer. Simply mopping this type of floor with a mild detergent can redistribute contamination rather than removing it.

Cleanfast Scrub Clean combines strong alkaline cleaning with effective degreasing action.

Once diluted and applied, the solution begins loosening grease and ingrained contamination from the surface. Mechanical agitation from a scrubber dryer or appropriate floor pad can then help release stubborn deposits before the dirty solution is recovered.

For manual cleaning, the same principle applies. Allow the detergent sufficient contact with the contamination, agitate stubborn sections and then remove the dirty cleaning solution thoroughly.

## Low Foam Formula for Scrubber Dryers

Cleanfast Scrub Clean is particularly useful for professional machine cleaning because it has been formulated to produce minimal foam.

A scrubber dryer needs to perform several tasks simultaneously. Cleaning solution is distributed onto the floor, brushes or pads agitate the surface, and the contaminated liquid is then vacuumed back into the machine's recovery tank.

Large quantities of foam can interfere with this process.

Using a low-foam floor detergent helps the recovery system operate more effectively while reducing unnecessary foam inside the machine.

This makes Cleanfast Scrub Clean an excellent option for large floor areas where mechanical cleaning provides a faster and more consistent result than traditional mopping.

## Suitable for Multiple Hard Floor Surfaces

Cleanfast Scrub Clean can be used on a range of compatible hard flooring, including suitable vinyl and stone surfaces.

Its versatility makes it particularly convenient in commercial premises containing several different types of washable hard floor.

Before treating an unfamiliar surface, always check that it is compatible with an alkaline degreasing product.

Test a small, inconspicuous area first when there is any uncertainty.

Avoid assuming that every hard floor can tolerate heavy-duty alkaline cleaning. Certain delicate, polished, coated or specialist surfaces may require a neutral cleaner instead.

## Simple Scrubber Dryer Instructions

Using Cleanfast Scrub Clean with a scrubber dryer is straightforward.

**Step 1 – Prepare the floor**

Remove loose debris before wet cleaning.

Vacuum or sweep away dust, grit, packaging material and other loose contamination. Remove any objects that could interfere with the machine.

**Step 2 – Display warning signs**

Place suitable wet-floor or cleaning-in-progress signs around the work area before beginning.

Keep pedestrians away from the cleaning zone where practical.

**Step 3 – Prepare the solution**

Dilute Cleanfast Scrub Clean according to the level of contamination and the instructions supplied with the product.

Use clean water and measure the detergent rather than guessing.

**Step 4 – Fill the machine**

Add the prepared solution to the scrubber dryer's clean-water or solution tank.

Follow the machine manufacturer's filling instructions.

**Step 5 – Scrub the floor**

Operate the machine systematically across the area.

For extremely greasy sections, additional agitation or a second controlled pass may be beneficial.

**Step 6 – Recover the dirty solution**

Make sure the machine's vacuum and squeegee system collects the contaminated cleaning solution properly.

Do not leave dirty detergent solution sitting unnecessarily on the floor.

**Step 7 – Inspect the floor**

Check the cleaned surface for remaining grease or dirt.

Repeat treatment on heavily contaminated sections if necessary rather than simply using excessive detergent.

## Simple Manual Mopping Instructions

Cleanfast Scrub Clean can also be used for manual floor cleaning.

First sweep or vacuum the floor thoroughly.

Prepare the appropriate diluted solution in a clean mop bucket.

Apply the solution evenly using a suitable mop, concentrating on heavily contaminated areas.

Allow a short contact period where necessary so the cleaner can begin loosening greasy deposits. Do not allow the cleaning solution to dry on the floor.

Agitate stubborn sections using a suitable floor pad, brush or mop.

Remove the dirty solution and finish the floor appropriately using clean equipment.

Change the mop water when it becomes heavily contaminated. Continuing to clean with extremely dirty solution can simply redistribute grease across the floor.

## Excellent for Hard Water Areas

Water quality can affect the performance of cleaning products.

Hard water contains higher levels of naturally occurring minerals that can interfere with certain detergents and contribute to poor cleaning results.

Cleanfast Scrub Clean is designed to maintain effective cleaning performance in hard-water conditions.

This makes it particularly valuable for professional cleaning contractors working across multiple locations where water conditions can vary.

When correctly dosed, the formula helps provide clean, streak-free results without relying on excessive quantities of detergent.

## Ideal for Commercial and Industrial Cleaning

Cleanfast Scrub Clean is particularly suitable for demanding professional environments.

Potential applications include warehouses, workshops, factories, garages, commercial premises and other buildings containing compatible hard flooring exposed to significant traffic and contamination.

Professional cleaners can use it for periodic deep cleaning when ordinary maintenance detergents are no longer strong enough.

It can also be incorporated into planned floor maintenance programmes where greasy contamination occurs regularly.

Using the correct chemical for the level of contamination can save substantial labour. A powerful degreaser allows the cleaner and mechanical equipment to work together rather than requiring repeated passes with an unsuitable mild detergent.

## Important Safety Instructions

Cleanfast Scrub Clean is a heavy-duty alkaline cleaner and should be handled responsibly.

**Wear suitable protective gloves and eye protection when handling the concentrate, preparing cleaning solutions or carrying out applications where splashing could occur.**

Avoid direct contact with the skin and eyes.

Do not deliberately breathe spray or mist.

Always add and measure the product carefully to minimise splashing.

Keep children and unauthorised people away from the chemical and from areas being cleaned.

Never mix Cleanfast Scrub Clean with other cleaning chemicals unless specifically instructed to do so. Combining professional cleaning products can produce dangerous reactions and may damage surfaces or equipment.

Keep the product in its original labelled container and never transfer it into beverage bottles, food containers or unmarked containers.

## Prevent Slips During Cleaning

Heavy-duty floor cleaning creates an additional temporary hazard: a wet and potentially greasy floor.

Always display suitable warning signs before starting work.

When degreasing extremely oily surfaces, remember that the floor may initially become more slippery as the detergent releases grease.

Wear appropriate slip-resistant footwear and work systematically.

Recover dirty solution promptly and prevent people from walking through the area until cleaning is complete and the floor is safe for normal traffic.

## Safe Storage and Equipment Care

Store Cleanfast Scrub Clean upright in its original container with the cap properly secured.

Keep it in a suitable chemical storage location away from children, unauthorised personnel and incompatible products.

After machine cleaning, empty and rinse the scrubber dryer's tanks according to the equipment manufacturer's recommendations.

Clean the squeegee assembly, brushes or pads when required and do not leave heavily contaminated detergent solution inside the machine for unnecessary periods.

Good equipment maintenance improves cleaning results and extends the working life of professional floor cleaning machinery.

## Why Choose Cleanfast Scrub Clean?

Cleanfast Scrub Clean Low Foam Floor Degreaser provides the powerful cleaning action required for heavily contaminated commercial and industrial flooring.

Its **heavy-duty alkaline formulation tackles grease, oil, dirt and ingrained contamination**, while the low-foam technology makes it particularly well suited to scrubber dryers and professional floor cleaning machines.

It also performs effectively in hard water and can be used on multiple compatible hard surfaces, including suitable vinyl and stone floors.

Application is straightforward: **remove loose debris, prepare the correct dilution, apply manually or through a compatible scrubber dryer, agitate the surface, recover the dirty solution and inspect the finished floor.**

For safe use, wear appropriate gloves and eye protection, display wet-floor warning signs, keep people away from the cleaning area and never mix the product with other chemicals.

For professional cleaners, warehouses, factories, workshops and other premises requiring more cleaning power than an everyday maintenance detergent can provide, Cleanfast Scrub Clean offers an effective combination of **heavy-duty degreasing, low foam, machine compatibility and professional floor cleaning performance**.