Martin colour changer lighting

Reduced to sell as seen.




15 x Martin Robo Colour III & Power pack controllers.
The RoboColor III is a high performance,
automated color changing system, providing exciting possibilities for lighting
designers in many applications.

CONTROLLABLE FUNCTIONS
This section briefly describes the various functions that can be remotely
controlled via the serial data input on the RoboColor III system.

B L A C K O U T
The default position of the color wheel is the blackout position. This means that
no light is emitted from the unit until the wheel is moved from this position.

C O L O R S
Each RoboColor III head has 11 dichroic colors plus white, all placed on a color
wheel. You can select these colors individually on any of the heads.

C O L O R S P L I T E F F E C T S
By placing the color wheel between two adjacent colors, color split effects can be
achieved.

C O L O R S C R O L L I N G
When switching from one color to another you can reduce the speed to emphasize
the scrolling effect.

C O L O R S T R O B E
Strobe between two adjacent colors is achieved by first selecting a color and then
activating the strobe. The color wheel will then strobe between the color selected
and the next color on the wheel. E.G. to make a black/white strobe, select the
blackout position on the color wheel and activate the strobe. You can adjust the
strobe rate to a desired frequency.

S T A N D - A L O N E
The built-in stand-alone programs can be activated from the controller.