Description

Second hand Truckman Hard Top cargo space cover for a crew cab 4x4 pick up.
Metallic black, extra high version, with a glass hatch back door.
Was fitted to a Mazda BT-50 (Ford Ranger). Will fit other similar pick ups Check the important TWO measurements:-
ONE: The top has side molding flanges that fit inside the vehicle cargo space SIDE to SIDE These molded edges are 1460 mm apart. There is a little bit of flexibility in the edges but i would say that your truck cargo space would need to have a width of at least 1460 mm INSIDE. The side edges of the cover are recessed each side by 60mm which gives you the flat surface that sits on the rim of the trucks cargo well. My estimation is that this wide recess means the top will fit up to a 1520mm width clearance.
TWO: The second measurement is length. The truckman front bottom edge hangs over the front outside edge of the truck cargo space. At the back the side recess noted above have a 90 degree turn in the back corners. These sit INSIDE the back top corners of the vehicle cargo space. (*These recess moldings could be cut to fit)
The measurement from the front (OUTSIDE of the truck rim) to the inside of the rim is a clearance of 1530 mm*.
The back hatch door is set further back by approximately 100mm so it can close outside the tailgate. SEE PHOTO TEN which shows the side flange's, recess ledge, and the back corners.
Overall the top is 800mm high so give you the chance to fit bulkier items that the standard low tops.
Blemish wise there is missing paint and rubbing marks at the front lower edge. A hinge pin on the door has been replaced with a bolt. Overall in very good nick.
This is a heavy bulky item. I am happy to deliver around Co. Cork for €50 and possibly further afield and up to Dublin as I work a lot up there. However the top must be paid for in advance if delivering. I will quite reasonably not be loading and travelling for a tyre kicker.