Browse categories

Irish Garage Equipment

Member since:
24/01/2014
Last online:
03/04/2020
Location:
Rathcoole, Dublin

Activity

Active:
472
Sold out:
11
Withdrawn:
234
Units sold:
616

Feedback Score [81]

  • 2KVA Pacini Inverter Generator

    3 2KVA Pacini Inverter Generator Features:- Recoil start Low Oil Shutdown THD (Total Harmonic Distortion) 1.2 Fuel Tank Capacity: 4.0l/1.1 gal Automatic idle down 7.8 Rated continuous amperage DC Charging Kit included Specifications Part Number: PC2000i Displacement: 79cc Loncin Max Watt Output: 2000 Cont. Watt Output: 1800 Receptacles: 1x230V 13A BS Socket 12V DC 8.0A Output Decible Rating: 7M: 60DB @ 50% Load Run Time / Tank: 7hr @ 1/4 Load Warranty: 1year

    €499
  • Se2000i Neilsen Digital Generator

    3 649 inc.VAT Visit www.ige.ie for further information on this product or any of the products listed. Generator AC Output Output Waveform - Pure-Sine Wave, THD<3% Rated Voltage - 230V Rated Frequency - 50HZ Rated Current - 7.8A Rated Output - 1800W Maximum Output - 2100W Safety Device Type - Electronic DC Output Rated Voltage - 12V Rated Current - 8A USB - 5V/2A/1A Safety Device Type - DC Protector Engine Type - 4-stroke gasoline OHV Cooling System - Forced air Cylinder Arrangement - Inclined, single cylinder Displacement - 79cm3 BorexStroke - 48.6mmx43.0mm (1.91 in x 1.69 in) Operation Hours - ([email protected] load) - ([email protected]/4 rated load) Fuel - Unleaded Gasoline Fuel Tank Capacity - 4.2L (1.11 US gal) Engine Oil Capacity - 0.35L (0.37 US qt) Ignition System - CDI Starting System - Recoil Spark Type - A5RTC (TORCH) Plug Gap - 0.6~0.7mm (0.024~0.028in) Noise Power Level (LWA) - Guarantee sound power level:92dBA @From 4m by CE standards Dimensions and Weight Overall Length-530mm (20.9 in) Overall Width-320mm (12.6in) Overall Height-430mm (16.9in) Dry Weight-24kg (52.9lb) 649 inc.VAT Visit www.ige.ie for further information on this product or any of the products listed.

    €649
  • Pacini 2 Post lift 4000kg Heavy Duty

    3 Features Fully automatic electric control panel. Driven by dual hydraulic cylinders. Chain type lifting system. Internal Electric locking mechanism, w/two point safety latches in each column. Automatic safety arm locks. Easy to operate up and down switches on electrical control box. Steel wire rope equalizing cables. Single Phase Adjustable lift pads and adapters (srew type) Wide base platform for extra support. Durable powder coat finish. 2 year warranty For more information on Maranello you can see there website here www.maranello-automotive.it Automatic Safety Release Price: Collected: 1600 + VAT Delivered: 1700 + VAT Delivered & Fitted: 1900 + VAT Capacity4000kg Stroke1834mm Overall Height3764mm Overall Width3433mm Drive Through Clearance2572mm Switchoff Level3616mm Support Bracket Length min.770mm Support Bracket Length max.1105mm Plate Height min114mm Plate Height max154mm Column Spacing, interior Dimension2862mm Motor Performance2.2kw Electrical Connection230V Lifting Time50 sec. G.W.705kgs

    €1,968
  • Pacini 750W 25mm Pillar Drill

    3 PRODUCT DESCRIPTION Motor Power : 750W Max.Drilling Capacity : 25mm (1") Spindle Travel : 85mm Class of Speed : 12 Speed 50Hz : 180~2770 r/min Spindle Taper : MT#3 Max. dist. from spindle axis to surface of column : 180mm Max. dist. from spindle end to surface of table : 700mm Max. dist. from spindle end to surface of base : 1200mm Swing : 360mm Table Size : 290mm x 290mm Base Size : 460mm x 272mm Diameter of Column : 80mm Overall Height(mm) : 1600mm N.W./G.W. : 63/66 Kg Packing Size : 1140mm x 500mm x 300mm 1 year warranty

    Power Tools
    6 months ago 32 comments
    €299
  • 2 Ton Folding Shop Crane Engine Hoist

    3 Product Description Quality Engine Hoist / Shop Crane (2 ton) Heavy-duty folding engine hoist has a lifting range from 1 to 93 and features a 4-hole position boom, heavy-duty 8-ton long ram, 6 wheels for added mobility and foldable design for easy storage. This 2 ton Folding Engine Crane / Hoist, can conveniently be manoeuvred and stored in any small space or corner of a workshop / garage. Tested and certified to CE standards, with an 8 ton heavy duty lifting ram, this engine crane has 4 positions 500kg, 1000kg, 1500kg and 2000kg. This Engine crane has a wide base for maximum stability. Features Designed for shops with limited space. Folds for easy storage. Heavy steel construction for maximum durability. Boom is reinforced to increase strength and eliminate flex. Includes 8-ton capacity ram. Heavy-duty steel casters for easy positioning. Front casters include a safety brake to prevent movement. Telescopic boom provides 4 positions. Includes heavy steel hook with safety latch. Wide base for maximum stability. Specifications Boom Length: 40- 63 / 1016-1600 mm. Base Length: 69 / 1753 mm. Boom Capacities: 4,400 lbs / 1996 Kg. 3,300 lbs / 1497 Kg. 2,200 lbs / 998 Kg. 1,100 lbs. / 499 Kg. Maximum Boom Height: 80 / 2032 mm. 84 / 2134 mm. 89 / 2261 mm. 93 / 2362 mm

    Power Tools
    6 months ago 58 comments
    €189
  • Pacini 100 Litre Compressor 3hp 14cfm

    3 This Pacini 100L 3hp Compressor with an XL pump is suitable for heavy, continuous operation and is ideal for workshops and professional use. This compressor delivers versatility in a cost effective manner, This piece of equipment would suit both professionals and serious DIY enthusiasts alike. 2 Year Warranty **CE Marked and certified** Side-by-side twin cylinder 3 wheels for optimum maneuverability Features:- 14 CFM displacement Large solid wheels for ease of transport Slow running belt for smooth, efficient operation Oil lubricated Multi-finned flywheel for improved cooling 2 year warranty Specifications:- Input voltage : 230V Fuse rating : 13 amp Motor : 3 HP Receiver tank size : 100 litre Max. pressure 10 bar

    €429
  • Pacini 200 Litre 10 Bar Compressor

    3 This Pacini 200L 3hp Compressor with an XL pump is suitable for heavy, continuous operation and is ideal for workshops and professional use. This 200ltr compressor delivers versatility in a cost effective manner, This piece of equipment would suit both professionals and serious DIY enthusiasts alike. 2 Year Warranty **CE Marked and certified** Side-by-side twin cylinder 3 wheels for optimum maneuverability Features 14 CFM displacement Large solid wheels for ease of transport Slow running belt for smooth, efficient operation Oil lubricated Multi-finned flywheel for improved cooling 2 years warranty Specifications Input voltage : 230V Fuse rating : 13 amp Motor : 3 HP Receiver tank size : 200 litre Max. pressure 10 bar

    €549
  • Pacini 7.5kva Silent Diesel Generator, Electric Start

    3 The Pacini Generator is now ATS Ready with easier and more convenient electric starter. New AVR (Automatic Voltage Regulator) stabilises the output power. Low oil level alarm system will automatically stop the generator when lube oil is less than the set value. This is our best-selling silent diesel generator. Ideal for a home standby generator, in the construction industry, with farmers and horse owners. Easier and more convenient electric starter. AVR (Automatic Voltage Regulator) stabilizes the output power. Low oil level alarming system will automatically stop the generator when lube oil is less than the set value. Diesel Generator:- Continuous output - 6.6kW / 7.5 KVA Max Output - 7kW Rated Power - 6KW Rated voltage - 230V / 50Hz DC Output - 12V / 8.3A Rated speed - 3000 rpm Power factor -(cosf)1 406cc / Single cylinder / 4-stroke Bore x stroke - 86 x 70 Fuel Capacity - 15 litres Run Time - 10 - 12 hrs Weight - 154kg Size - 965L x 565W x 725H Electric Start Comes with 1000 Hour or One Year fully comprehensive warranty.

    €1,290
  • 2500kg Single Post Pacini Lift

    3 2500kg Single Post Pacini Lift The newest addition to our Pacini range. With a 2.5 ton capacity. This is ideal for garages with limited space. The PC250 is suitable for parking both modern and classic cars with its adjustable pad and arms. Red & Yellow in colour SPECIFICATION: - Lifting Capacity 2.5 Ton - Lifting Height: 1960mm - Lifting Time: 32 seconds - Motor: 3.0hp - Power: Single Phase 220V 16amps - Gross Weight: 901Kg - Overall Height: 2766mm - Minimum Pad Height: 106mm MAIN FEATURES: 24V control system Mechanical Self Lock Two Levels of Safety Chain Protection Cover Adjustable Screw Pads Reinforced Column with Adjustable Arms Height Limit Switch Which Protects the Cylinder Long Term CE Approved 1 year warranty

    €2,450
  • 18 pcs Alternator Repair Set

    3 Product Description A comprehensive range of Combination Sockets required on the Free Wheel Pulley when removing or replacing the alternator. The set includes tools for Bosch, Marelli and Valeo alternators and is now complete with the new tools required for the latest Renault and Fiat alternators.1/2"D x Star T50 110mm 19mm x 33 teeth 17mm Hex B 1/2"D x Spline M10 110mm 19mm x 33 teeth 17mm Hex C 3/8"D x Spline M10 90mm 14mm x 33 teeth 12mm Hex D 1/2"D x Spline M10 110mm Not fixed Not fixed E Star T50 75mm Not fixed 10mm Hex F Star T40 75mm Not fixed 10mm Hex G Spline M8 75mm Not fixed 10mm Hex H Spline M10 75mm Not fixed 10mm Hex I Hex 10mm 75mm Not fixed 10mm Hex J Hex 8mm 75mm Not fixed 10mm Hex K Spline M10 64mm Not fixed 12mm Hex L Reaction Nut 19mm x 33 teeth 22mm Hex M Reaction Nut 19mm x 33 teeth 15mm Hex N Reaction Nut 19mm Hex 28mm Hex O Reaction Nut 22mm Hex 22mm Hex P Reaction Nut 21mm Hex 28mm Hex Q Reaction Nut 4 Pin 17mm Hex R Adaptor 10mm Hex 1/2"D

    Power Tools
    6 months ago 14 comments
    €40
  • Pacini Bench Grinder 1500W 300mm

    3 Pacini Bench Grinder 1500W 300mm MD-300M 12" (300mm) Power : 1500W Wheel Size : 300 x 40 x 75 mm 1 year warranty

    Power Tools
    6 months ago 1 comments
    €379
  • Hose for Neilsen 2200psi Petrol Pressure Washer

    3 PRODUCT DESCRIPTION Hose for Neilsen 2200psi Petrol Pressure Washer

    Power Tools
    6 months ago 36 comments
    €25
  • 7-drawer Roller Tool Cabinet

    3 Dimension:77.0x46x97cm (height include castors) All steel construction 0.8mm steel Superior red powder coating finish All ball bearing drawer slides Top work surface includes a plastic top tray with handles Automatic locks each drawer Side internel locking system with 2 keys Heavy-duty 5''1.5'' castors, 2 fixed and 2 swiveled with brakes 7 pcs drawers: 5PC width 54.5mm depth 39.5mm height 75mm; 2PC width 54.5mm depth 39.5mm height 135mm.

    €349
  • Laser Wheel Alignment Gauges

    3 These Phoenix Wheel Alignment Gauges measure the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use. Precision Laser To Indicate Toe-In / Toe-Out Can Be Used On Vehicle Lifts Will Work On Vehicles With Rim Diameters 8-24 (200mm - 600mm) Battery Powered By 2x AA Cells (Included) Measuring Range +/-2deg Laser Class II Very good quality

    €429
  • 3 Ton Low Profile Quick Lift Heavy Duty Trolley Jack

    3 Professional Heavy Duty Jack with a low profile Lifting Range 75mm - 505mm Double Ram Fast Action Overall Dimensions : (L x W) 680mm x 330mm Heavy duty all-welded steel construction Comes equipped with overload protection safety valve and over pumping prevention by-pass system. (Colour may vary)

    Power Tools
    6 months ago 5 comments
    €159
  • Timing Tool Set for VAG 1.6 / 2.0 Litre TDI PD Common Rail Diesel Engines

    3 PRODUCT DESCRIPTION Timing Tool Set - VAG Diesel For Timing Belt replacement on 1.6 / 2.0 TDi PD Common Rail Diesel Engines Crankshaft Locking Tool Camshaft Locking Tool Camshaft Wheel Puller Balance Shaft Fixing Tool Audi Al / A3 (8P) A4 (B8) AS / A6 (C6 C7) TT (8J) Q3 / Q5 Skoda Fabia . Roomster . Practice . 0ctavia II . Suberb II . Yefi Seat Ibiza (6J) . Leon III . Exeo . Altea . Alhambra II VW Golf V / VI / Plus . Passat . Polo V Jetta V / VI . Scirocco lll Beetle II / II . Caddy . Passat B6 / B7 / CC Touran . Sharon II /T5 . Amarok

    Power Tools
    6 months ago 9 comments
    €45
  • Engine Timing Tool - For BMW N51 / N52 / N53 / N54

    3 PRODUCT DESCRIPTION Timing Tool Kit - BMW BMW Engine Timing Tool Kit for engine codes - N51 . N52 . N53 . N54 For Camshaft Timing Belt change Checking and adjustment of valve timing With Camshaft and Crankshaft Locking Tools and Transmitter Wheel Locking Tool. Suitable for following models - 128i .130i .135i-e81 / e82 / e87 323i . 325i .328i . 330i . 335i - e90 / e91 / e92 / e93 523i . 525i . 528i . 530i-e60 / e61 . 5351 . 6301- 663 / 664 . 730i - e65 / e66 X32.5 / 3.0 - e83 . X53.0 - e70 . Z42.5 / 3.0 - e85 / e86

    Power Tools
    6 months ago 3 comments
    €159
  • Petrol Engine Setting / Locking Kit - BMW N42/N46/N46T 1.8,2.0 - Chain Drive

    3 PRODUCT DESCRIPTION Timing Setting Kit - BMW Timing Setting and Locking Set - BMW For adjusting and setting the timing on BMW petrol engines with the Valvetronic system. Includes tools to align the Twin Vanos unit. Suitable for BMW N42 / N46 N46T 1.8 and 2.0 Chain Drive engines.

    Power Tools
    6 months ago 9 comments
    €99
  • Timing Tool Vw 2.5tdi Pd, 5 cylinder

    3 PRODUCT DESCRIPTION The water pump on the Volkswagen Transporter and Touareg is driven by the gears that drive the timing. It is beneficial to change the water pump when replacing the Timing Belt to avoid damage to the engine if the bearing in the water pump fails. These tools are essential for the removal of the water pump and the alignment of the engine at top dead centre. For VW T5, Touareg 2.5L 5-cylinder TDI engines. Engine Codes AXD / AXE / BAC / BLJ / BLK / BNZ / BPC / BPD

    Power Tools
    6 months ago 4 comments
    €35
  • BMW M52tu/M54/M56 Double Vanos Camshaft Alignment Tool

    3 PRODUCT DESCRIPTION CT3586 Timing Tool Set - BMW 5pc BMW Double VANOS Camshaft Alignment Tool Set This kit contains all the tools necessary to assemble and time the VANOS cam-timing units on BMW M52TU . M54 and M56 6-cylinder engines utilized from 1998 onwards. Alignment Jig Adjusting plate for setting valve timing on engine with double Vanos. Sprocket Assembly Jig for pre-assembling secondary chain sprockets with chain on camshafts. Chain Tensioner Lock Pin locks chain tensioner during timing. VANOS Compressed Air Connector use to pressurize the single and double Vanos unit when servicing. Applicable to 6 cylinder engines M52TU - 1998-2000 . M54 - 2001-2004 . M56 - 2003 to present.

    Power Tools
    6 months ago 0 comments
    €149
  • BMW Timing Tool Set - For BMW N20 & N26 Engine

    3 PRODUCT DESCRIPTION BMW N20 / 26 Timing Tool Kit BMW Timing Tool Set For BMW N20 and N26 Engines Engine alignment tools applicable to BMW 4 cylinder turbo engines. Kit Includes : BMW - N20 / N26 camshaft locking tool BMW - N20 / N26 camshaft fixating base BMW - N20 / N26 alignment Pin BMW - N40 | N42 | N45 | N46 | N52 | N55 | N62 chain tensioner

    Power Tools
    6 months ago 0 comments
    €149