3 Free Delivery This wheel hub puller set is a must have for professionals in garage or workshop. It is perfect for professional use because of its superior quality, comprehensive fittings and easy storage. It is a heavy duty wheel hub puller set consisting of 30 pieces for the removal of stubborn stud hubs and brake drums on cars and light commercial vehicles. With all pieces supplied in a blow molded case, you can find the fittings you need at a glance and display them easily in order for both storage and transportation. Can remove wheel hubs, half shafts, brake drums, drive shafts directly in the car Heavy duty set for the removal of stubborn four and five stud hubs and brake drums on cars and light commercial vehicles Suitable for VW, Audi, Alfa Romeo, Ford, Citroen, BMW, Mazda, FIAT, Mercedes-Benz, Seat, Opel, Peugeot, Renault, Skoda, Porscheetc A mechanical spindle can press out drive shaft Spindle pressure: Maximum 12 t With the 4,3kg slide hammer Highest quality design for long life in industrial use Specification of 30 pcs: 4 x screw L15.4cm -2 circle 4 x screw L15.4cm -4 circle 4 x screw L16.8cm -2 circle 4 x screw L16.8cm -4 circle 4 x screw L16.8cm -4circle 4 x nuts 2.8cm 1 x lever for pneumatic wrench L25.8cm 1 x lever for slide hammer L57.3cm 1 x top block of lever for slide hammer 1 x hammer 1 x bearing-8 holes 1 x connecting block Supplied in a blow molded case Highest quality design for long life in industrial use SKU 210199 Delivery is 6-7 working days. IF YOU PURCHASE WITH PAYPAL, PLEASE SEND US A MESSAGE THAT YOU BOUGHT A PRODUCT.

3 Free Delivery This Brder Mannesmann toolbox contains 88 of the most commonly used hand tools in a lightweight and durable metal case, making it an indispensable set for DIY enthusiasts and hobby mechanics. All tools can be fixed quickly and easily at the specified location with the soft foam inlay system. This hand tools set contains everything you need from water pump pliers, combination pliers and side cutters, reversible ratchet tool, bit adaptor, and bit sockets. The featured tools are made of sturdy chrome-vanadium steel. You can easily carry the tool case along with its carrying handle. Colour: Green, silver and black Material: Chrome-vanadium steel Tool case dimensions: 47 x 24 x 24 cm (W x D x H) With soft foam inlay system 88-piece tool set in robust metal case: 1 x Metal toolbox 1 x 18 mm snap-off knife 10 x Spare blades (in case) 4 x Screwdriver slotted (5,5x75mm, 6,5x100mm Philips PH1x75mm, PH2x100mm) 1 x Voltage tester 1 x Water pump pliers 250 mm 1 x Combination pliers 180 mm 1 x Side cutter 160 mm 1 x Straight telephone pliers 160 mm 1 x 3 m measuring tape with stop 1 x Household scissors 8 x Hex key (1,5-6,0 mm) 1 x Quick change bit holder 1 x Roll adhesive tape 1 x Reversible ratchet screwdriver handle 30 x Bit (5 x slot, 5 x hex, 6 x Philips, 4 x Pozidrive, 10 x Torx) 1 x Reversible ratchet 3/8 9 x Socket 3,8 (10-11-12-13-14-15-17-18-19 mm) 8 x Socket 1/4 (4-4,5-5-5,5-6-7-8-9 mm) 1 x Adaptor 10 x 6,3 mm (3/8 x 1/4) 1 x Extension 75 mm 1 x Screwdriver handle 6,3 mm 1 x Spark plug socket 21 mm 1 x It-adaptor 6,3 mm 1 x Bench hammer 300 g 1 x Torpedo water level SKU 433771 Delivery is 6-7 working days IF YOU PURCHASE WITH PAYPAL, PLEASE SEND US A MESSAGE THAT YOU BOUGHT A PRODUCT.

3 Free Delivery This diesel injector puller tool set allows the easy and quick removal of diesel injectors. The injector puller set is crafted from high-quality steel, ensuring excellent durability. All tools are delivered in a sturdy case for easy storage and transportation. Delivery includes 4 adaptors, 4 slide hammers, 5 nuts, 2 jaws, 2 pullers, 1 spot weld cutter, 12 screws, 1 extractor tool, 4 snap rings, 1 shaft, and 5 sockets. Material: Steel Case dimensions: 38 x 10 x 6 cm (L x W x H) Set includes: 4 x Adaptor, 3.1 x 5 cm, 3.3 x 5 cm, 2.1 x 6.5 cm, 2.1 x 6.5 cm (Diam. x L) 4 x Slide hammer, 7.5 x 16 cm, 6.5 x 45.5 cm, 8.5 x 59.5 cm, 10.5 x 43.5 cm (Diam. x L) 3 x Nut (length: 3 cm, 3.5 cm, 4 cm) 2 x Nut (diameter: 2.3 cm, 2.6 cm) 2 x Jaw 2 x Puller (length: 10.5 cm, 12.8 cm) 1 x 9.5 mm spot weld cutter 12 x Screw (length: 3.6 cm, 5 cm, 3 x 5.5 cm, 5 x 6 cm, 2 x 6.1 cm) 1 x Extractor tool (length: 14 cm) 4 x Snap ring 1 x Shaft (length: 31.7 cm) 5 x Socket (25 mm, 27 mm, 28 mm, 29 mm, 30 mm) SKU 210394 Delivery is 6-7 working days. IF YOU PURCHASE WITH PAYPAL, PLEASE SEND US A MESSAGE THAT YOU BOUGHT A PRODUCT.

3 Free Delivery Accessories for pulling flange to operate with impact hammer and for removing wheel hubs are included in this hydraulic wheel hub puller. With a maximum capacity of 10 ton, the hydraulic spindle is adequate to meet the requirements for vehicle rescue. Many automobile repair and maintenance procedures such as the check of rear wheel bearings and lubricating oil, the inspection of brake drum and brake shoe have to be done after disassembling wheel hubs. Thus these large and regular procedures turn to be time and energy consuming projects. But with this hydraulic wheel hub puller set at hand, you will be able to yield twice the result with half the effort. With all pieces supplied in a blow molded case, you can find the tools you need at a glance and display them easily in order for both storage and transportation. Included 3 pullers/ hammers: hydraulic spindle, screw, impact hammer Used to press the axle shaft from the hub For four or five bolt hubs with the centerline of the bolts mounted in a 116-135 mm diameter circle Hydraulic spindle with 10 ton capacity Suitable for VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen, etc Highest quality design for long life in daily workshop use Displayed in a blow molded case SKU 210200 Delivery is 6-7 working days. IF YOU PURCHASE WITH PAYPAL, PLEASE SEND US A MESSAGE THAT YOU BOUGHT A PRODUCT.

3 Free Delivery This hydraulic puller and separator tool set is perfect for railway vehicle maintenance, mechanical installation, maintenance mines, and factories by removing pulley, bearings, gears, and other components.This hydraulic puller and separator tool set includes: 1 x bearing separator, 1 x beam, 1 x centre adapter, 1 x triple head, 1 x twin head, 3 x 4 leg puller, 3 x 6 leg puller, 3 x 8 leg puller, 1 x rampart, 1 x 2 extension rod, 1 x 4 extension rod, 4 x 8 extension rod, 1 x 10 tonne hydraulic ram and 3 x screw.The blow-moulded storage case is well designed for long life in daily use and for easy transportation. Suitable for pulling commercial vehicle size bearings from 75 105 mm The toolset includes: 1 x 75 105 mm bearing separator 1 x Beam 1 x Centre adapter 1 x Triple head 1 x Twin head 3 x 4 leg puller 3 x 6 leg puller 3 x 8 leg puller 1 x Rampart 1 x 2 extension rod 1 x 4 extension rod 4 x 8 extension rod 1 x 10-tonne hydraulic ram 3 x Screw Supplied in a blow-molded case SKU 210266 Delivery is 6-7 working days. IF YOU PURCHASE WITH PAYPAL, PLEASE SEND US A MESSAGE THAT YOU BOUGHT A PRODUCT.