3 Still available. Overview : Includes Everything to get into the air ! This is the Skyartec Skyfun. It is made of light weight EPO foam and can perform all primary aerobatics. It offers great slow flight stability but also blistering speed at up to 100Km/hr or faster with upgraded motor and ESC. This pusher jet is a great airplane and is suitable for both beginners and intermediate flyers Features : -80% Factory assembled, Quick assembly & Ready to Fly in Just Minutes! -Super tough, lightweight foam construction with excellent strength -Supplied with 2 servos for combined elevator and ailero control (mixed) -Suit Beginner (with some flying skills) to Advanced hobbyist -Great at slow-speed and high-speed high altitude flight. -Stable flight and very easy to control. Elegant design. -Shock Resistant Reinforced Fuselage and Strong Wings Included : -Near Factory assembled airplane with Prebuilt wing, fuselage and tail section & Decals -1800KV Brushless motor, 25A ESC, 2 x 9g servos -1,100 mAh LiPo Battery & Mains LiPo Charger -All necessary hardware including pushrods Instruction manual -Radio TX & RX : 4-channel (supporting Elevator / Aileron mixing) Required to Operate : -8 x AA Cell Batteries for the TX - that's all ! NOTE : All additional items and accessories are also available from RadioActive Models - Contact us for special pricing and discounts on our RAM Packs (everything you need for one low price !) Delivery cost : 15 anywhere in Ireland (registered, insured parcel post) or FOC if Collected Returns Policy - 100% refund within 30 days of delivery, with unopened and undamaged packaging (buyer pays for return costs !). 30 day product warranty included More details (including videos of the models in action), More models and More Accessories .... just visit our Web Site or Find Us On Facebook !

3 ST Model Blaze EPO Brushless Hotliner powered glider Super-easy to assemble super-fun to fly! Perform near-vertical launches, carefree climbs and more with the lightweight, receiver-ready Blaze Hotliner Brushless EP RR from ST Model! A powerful outrunner brushless motor, brushless ESC and micro servos come installed. Super-easy assembly means you'll be executing high-g manoeuvers in less than 20 minutes. Super relaxing Gilding characteristics coupled with adrenaline pumping aerobatics under power ! - Easy to build - pilots can be airborne in less than 20 minutes. - Executes near-vertical launches / no throws necessary. - Outrunner brushless motor. Brushless ESC - Two moulded plastic "plates" underneath the wing halves serve as a platform for squaring up the wing to the fuselage, simplifying assembly. - Lightweight, durable EPO wing halves slide together via a square carbon wing joiner. - 4 x Micro servos included - Plenty of carbon reinforcements make it ideal for extreme, high-G manoeuvers. - 10x6 folding prop. SPECIFICATIONS - Length: 40" (1016mm) - Wingspan: 61.5" (1562mm) - Flying Weight: 31.7oz (900g)

3 The Cypher 3D is ultra-quick to complete as it comes 95% factory assembled and almost ready to fly. Supplied with a high quality brushless outrunner motor and matching electronic speed controller, it is suitable for 3 cell Li-Po batteries and micro radio. The Cypher gives Stunning 3D Performance! and features advanced 120 CCPM Main Rotor Control System If you're looking for a high performance 3D helicopter, prepare to be amazed at what this versatile EP helicopter can do Included : '400 size' Electric Acrobatic Helicopter ARF Powerful 3800Kv Brushless Motor 40A Electronic Speed Controller Main Blades (wood) Full Decal sheet Required to Operate : 5 Channel Radio set (with 4 Micro Servos and CCPM mixing) Gyro (heading hold recommended) Batteries for Radio and Helicopter (11.1V 2100 to 2500 mAh Li-Po for Heli) Battery Charger - all additional items required are available from RadioActive Models - Delivery cost : 15 anywhere in Ireland (registered, insured parcel post) or FOC if Collected Returns Policy : 100% refund within 30 days of delivery, with unopened and undamaged packaging (buyer pays for return costs !). 30 day product warranty included More details (including videos of the models in action), More models and More Accessories .... just visit our Web Site or Find Us On Facebook !

3 ST Models MX2 Aerobatic Sports RC Airplane Updated Version including : 1) New 36A ESC for improved durability in all conditions, 2) Tinted real canopy for better scale appearance 3) Strengthened internal undercarriage mounting for better rough field durability 4) Side thrust to offset torque in hovering and low speed manoeuvres Want a sports aerobatic model that is economic to buy, economic to operate and stunning to fly? You've just found it! The ST Models MX-2 is based on the full size, aerobatic aircraft of the same name and then modified for model flying characteristics. Supplied complete with powerful 920Kv brushless motor, 12 x 6 propeller, a 36A brushless ESC, four powerful new 9g servos and with them all pre-installed. All that is needed is 30 minutes of final assembly and applying the stunning colour decals. Setups are provided for both sports and 3D flying (even mixes). For serious 3D pilots, the movements make manoeuvres like static loops, rolls and the 'waterfall' and 'parachute' quite within your reach. To provide that 3D control power with precision has been achieved with a totally new servo amplifier to give high resolution and holding power combined with strong torque. The control pushrods are kept short by placing each servo close to the surface it is operating. Using a 3S 2200-2600mAh Li-Po, there is enough power to hover vertically with ease and then punch out straight up! The choice of a 12 x 6 propeller limits the 'torque' turn effect and eases current consumption by matching the load and motor power/Kv rating effectively. Torque rolls are possible in both directions. Access to the battery is via a clip-in underside hatch, simple! Like all ST models, the airframe is moulded accurately in 'ding' resistant EPO foam. The wings are removable by removing the two quick turn locking screws and sliding out of the fuselage, great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding. The tough, aluminium undercarriage soaks up those landings on our club patches so well, but the model is hardly moving forward anyway! As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat. And it looks 'cool' too! The ST Models MX-2 EP ARTF requires the following to complete (not included) : A minimum of a four channel Transmitter and Receiver 3S 11.1v 2200mAh - 2600mAh LiPo battery and charger -1210mm Wingspan -1106mm Length -960g Flying Weight

3 Fed up of being unable to charge more than one or two batteries? What about being unable to charge totally different capacities and chemistries at the same time? At last, we have the answer in the form of the new 'Quattro' charger. This is effectively four high performance, feature rich chargers all built into one compact case. Each charger has its own display screen and programming buttons for complete, independant control. Each charger has its own balance port for Lithium type battery balancing and one balance board for XP and TP plugs is supplied (others are available as options). Two of the chargers have a temperature sensor socket which also doubles as a PC interface socket. These sensors/cables are options. The Quatro is built into a sturdy aluminium case with extensive cooling fins to handle the 50W charge per charger that it can handle. That's a total of 200W. You will need a good 12V battery or a 200W power supply as a power source. The 20A power supply provided by RadioActive Models is ideal. Technical Specifications : -Operating Voltage - DC 11-18V -Dimensions : 225.4 x 58.6 x 62.5mm -Weight : 1.1Kg Per built in Charger (x4) : -50W Charge, 5W Discharge -1-15 Cells Nimh/Nicad -1-6 Cells Li-Po/Li-Ion/Li-Fe -1-10 cells Lead Acid -Balancing Current - 300mA -Charge range : 0.1 to 6A for each -Discharge range : 0.1 to 1A for each -Max circuit power : 240W Included : Quattro charger & charge leads Delivery cost : 15 anywhere in Ireland (registered, insured parcel post) or FOC if Collected Returns Policy : 100% refund within 30 days of delivery, with unopened and undamaged packaging (buyer pays for return costs !). 30 day product warranty included More details (including videos of the models in action), More models and More Accessories .... just visit our Web Site or Find Us On Facebook !