3 SOUNDSATION LED SPOT MOVING HEAD 60 W MOOD L60 SPOT MOOD L60 SPOT is part of a wider range of SOUNDSATION intelligent LED moving head lights. This lighting is compact, lightweight and very easy to use. It has been designed to meet the demands of more customers. Thanks to the 60W high-brightness white LED, with a lifetime of about 50,000 hours, it is extremely bright and reliable, the 20 beam angle, and the gobos wheel with 7 colours. And a lightweight and high-performance spot product to suit various lighting applications. Not only that, but thanks to its 16-bit precision in driving and motion control, it creates strobe effects, precise dimmers and extremely refined positioning. Finally, the multifunctional LED display has been developed to help the user configure the unit, making it easy to use, reliable in performance and versatile in application. A MUST for all lighting professionals. SPECIFICATIONS KEY FEATURES 60W high-brightness white LED with a service life of approximately 50,000 hours Beam angle of 20 0-100% Electronic dimmer 0-20Hz Strobe effect 7-colour colour wheel Gobo wheel with 7 gobos.

3 SOUNDSATION LED BEAM MOVING HEAD 100 W MOOD L100 BEAM MOOD L100 BEAM is part of a wider range of SOUNDSATION intelligent LED moving head lights. This lighting is compact, lightweight and very easy to use. It has been designed to meet the demands of more customers. Thanks to the 100W high-brightness white LED, with a lifetime of about 50,000 hours, it is extremely bright and reliable, the 2.5 beam angle, and the gobos wheel with 7 colours. And a lightweight and high-performance spot product to suit various lighting applications. Not only that, but thanks to its 16-bit precision in driving and motion control, it creates strobe effects, precise dimmers and extremely refined positioning. Finally, the multifunctional LED display has been developed to help the user configure the unit, making it easy to use, reliable in performance and versatile in application. A MUST for all lighting professionals. SPECIFICATIONS KEY FEATURES 100W high-brightness white LED with a service life of approximately 50,000 hours Beam angle of 2.5 0-100% Electronic dimmer 0-20Hz Strobe effect 7-colour colour wheel Gobo wheel with 7 gobos

3 OUNDSATION LED WASH MOVING HEAD WITH ZOOM MOOD 715Z WASH 7 X 15 W MOOD 715Z WASH is part of a wider range of SOUNDSATION intelligent LED Moving Head Lights. This lighting is compact, lightweight and very easy to use. Its been designed to meet more customers demand, thanks to the ultra-smooth dimmer, the Zoom function (5,5-45) and is equipped with 7 x 15W RGBW LED, extremely bright and reliable, It can be used as both beam and wash light, in order to meet various lighting applications. Not only, but thanks to the 16-bit of precision on movement driving and dimming, it creates extremely fine strobe, dimmer and positioning effects. Finally, the multi-function LED operation is developed to help the user setting the unit up, making this fixture easy to use, reliable in performance and versatile in applications. A MUST for all lighting professionals. SPECIFICATIONS KEY FEATURES 7 x 15W RGBW LED with about 50.000 hours lifespan 5,5-45 zoom system 0-100% Electronic dimmer 0-20Hz Strobe effect Color Macro, Pulsating and Skipped Color change 540 / 270 Pan/Tilt SPECIFICATIONS LED7 x 15W RGBW with about 50.000 hours lifespan Zoom5,5-45 ColorMacro, Pulsating and Skipped Color change DimmerElectronic 0-100% Strobe0-20Hz Control mode14CH / 16CH, DMX512, Master/Slave, Auto, Sound Pan/Tilt540 / 270 DisplayLED VoltageAC100V-240V - 50/60Hz Rated Power130W Main socketIEC Europlug DMXIN and OUT 3 pin XLR Running Temp.0-40C Net Weight4 kg Fixture Size (WxDxH)158 x 145 x 300 mm Gross Weight4.5 kg Packing size (WxDxH)270 x 210 x 340 mm

3 Overhead kit for the Equinox DJ Booth (Order codes: EQLED12P, EQLED12L or EQLED12). Telescopic uprights Heavy duty lighting bar with 10 lower and 10 upper fixture location points Wingnut fixing bolts 4 x upright clamps Carry bag included Compatible with both MKI and MKII DJ Booths

3 View and Demo This FBT Speaker at our Ballymount Shop . 5 Year Warrenty. FBT Padded Covers Available. https://youtu.be/y_S5qIy0dAI X-LITE 115A 15" Powered Speaker with Built-in Bluetooth The FBT XLITE 115A with integrated 3-channels mixer features lightweight, yet rugged gas injected moulded polypropylene cabinet construction. Available in black finish, the FBT XLITE 115A provides excellent sound and an elegant design for portable sound and fixed installation. PRODUCT DESCRIPTION The FBT X-LITE 115A is two way design incorporating a 15 low frequency woofer and 1 HF compression driver coupled to a 90H x 60V constant directivity horn. With a frequency range of 42Hz - 20kHz the FBT X-LITE 115A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 130dB. The bi-amplified FBT X-LITE 115A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, hp filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT X-LITE 115A speaker to be surface mounted on walls or ceilings. The asymmetrical shape of the FBT XLITE 115A cabinet also allows use as a powered floor stage monitor. A standard 1.38 speaker stand socket allows the FBT X-LITE 115A to be mounted on speaker stand. KEY FEATURES 2-way bi-amplified system in bass reflex Polypropylene molded enclosure Woofer custom 15 (LF) / 2.5 voice coil 1 throat / 1,4 voice coil HF compression driver 1200/300W built-in amplifier (LF/HF) Bluetooth 5.0 3-channels mixer 4 DSP presets 30 or 45 monitor taper Universal switching mode power supply 100-240Vac M10 rigging points

3 FBT X-PRO 110A Active Speaker On Demo at Sound Lease Ballymount Irish FBT Dealers . https://youtu.be/bU_vkymoGzI 1200W + 300W - 10" + 1" Active Speaker with Bluetooth The X-PRO 110A offers the FBT quality and sound at an incredible price. High Power, Mixer Section, Bluetooth 5.0, Fan Cooled, 4 DSP Presets, Plywood Cabinet. PRODUCT DESCRIPTION The FBT XPRO 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded Plywood cabinet construction. Available in black finish, the FBT XPRO 110A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XPRO 110A cabinet also allows use as a powered floor stage monitor. The FBT XPRO 110A is two way design incorporating a 10 low frequency woofer and 1 HF compression driver coupled to a 80H x 50V rotatable constant directivity horn. With a frequency range of 58Hz - 20kHz the FBT XPRO 110A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. The bi-amplified FBT XPRO 110A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XPRO 110A speaker to be surface mounted on walls or ceilings. A standard 1.38 speaker stand socket allows the FBT XPRO 110A to be mounted on speaker stand. KEY FEATURES 2-way bi-amplified system Plywood cabinet Woofer custom 10LF / 2.5 voice coil 1 throat / 1.4 voice coil HF compression driver 1200/300W built-in amplifier max (LF/HF) Bluetooth 5.0 3 channels mixer 35 monitor taper 4 DSP presets 80 H x 50 V rotatable constant directivity horn Universal switching mode power supply 100-240 VAC M10 rigging points APPLICATIONS

3 Soundsation PMX-8UBT The Soundsation PMX-8UBT is the ideal tool for all those small bands or musicians who need a mixer with quality Mic. preamps with + 48V phantom power, a digital processor with 16 useful effects, an MP3 player with USB port and a dual amplification line for both FOH and stage monitoring with a 7-band EQ for each of them. Its size and lightweight combined with robust construction makes it extremely portable and stage-resistant. 300+300W peak power amplification 8-channel mixer with 2-band EQ, FX send, Gain, Pan and Level for each channel Premium Mic. Preamps with Low-impedance XLR and High-impedance Jack connectors +48V Phantom Power switchable on all XLR inputs for the use with condenser microphones Digital effect with 16 among most used presets Stereo TAPE In/Out for recording or playing audio to/from recorders, sound cards or other equipment Two 7-band graphic EQ for respectively main and monitor outputs MP3 player with wide LCD display and USB input for mass storage devices up to 32GB Bluetooth connection for stereo playback of smartphones, tablets, etc. Lightweight and impact-resistant ABS enclosure with practical handle on one side for easy transport Dimensions (WxHxD) 440 x 255 x 240 mm Weight 9.0 kg 2-Year Warranty

3 Finance this Item with Flexi fi Quote link below. https://apply.flexifi.com/s/quote?toURL=Quote&src=0011n00002NEhQZAA1 FBT Audio AX 2000 Power Amp Tough, reliable, genuinly powerful the AX 2000 offers this and is ideal for live sound reinforcement speaker systems in clubs, discos, piano bar, conference halls, houses of worship, sports arenas, schools, theatres, mobile DJ use, recording studio monitors and foreground music reproduction. PRODUCT DESCRIPTION 2 Ch. Power Amp - 2x1000Wrms (4ohm) - 2000Wrms (8ohm bridge) Suitable applications: Amplification for live sound reinforcement speaker systems in clubs, discos, piano bar, conference halls, houses of worship, sports arenas, schools, theatres, mobile D.J. use, recording studio monitors, foreground music reproduction, etc. Tour tough built, sleek design, impressive specs, excellent cost per watt performance, efficient under any application. With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to 3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on AX 800), Speakon/Binding posts outputs. KEY FEATURES Both channel driven 8 ohm 1% THD Continous/impulsive: 630/650W Both channel driven 4 ohm 1% THD Continous/impulsive: 840/1000W Bridge 8ohm 1% THD: 1680/2000W Input impedance: 20K balanced Signal to noise ratio S/N: >100dB Total harmonic dist. (1kHz-4ohm): <0.03% Frequency response: 20Hz-40kHz -6dB Damping Factor: >400 Class: H - 2 step Maximum power consuption: 2400va Power supply voltage: 120 or 230 vac 50/60 Hz Protections: Short circuit / thermal Connectors: In: XLR/Jack out: Speakon/Binding post Net Dimension (WxHxD): 482 x 88 x 290mm 21kg

3 The Equinox MaxiPar Tri mk2 is a compact, slim profile par is designed for uplighting as well as stage lighting, and will bring deep, rich colours to any event or venue.It features 12 x 3W tri-colour RGB LEDs which offer smooth colour mixing. Operational modes including DMX, auto, sound active and master/slave modes. Features : - 12 x 3W tri-colour LEDs (RGB) - Beam angle: 25 - 2,106 Lux @ 2m (full on) - DMX channels: 6 - Auto, sound active and master/slave modes - 0-100% dimming and variable strobe - 4 push button menu with LED display - Bracket allows for multiple rigging or floor standing applications - Rubber feet allow the panel to sit flat on the floor for uplighting - Side entry XLR and power connections - IEC power input/output - 3-Pin XLR input/output - Fan cooled Specifications : - Power consumption: 40W - Power supply: 100~240V, 50/60Hz - Fuse: T1A 250V - Dimensions:210 x 225 x 115mm - Weight: 0.85kg

3 SOUNDSATION ALCHEMIX 402 UFX 8-Channel High Quality Mixer with 24-bit Digital Multi-Effect & USB Stereo In/Out Soundcard. AlcheMix mixer series has been designed to meet the requests of musicians and entertainment operators who need reliable and professional instruments for live shows, rehearsal rooms, schools, home recording, etc. The architecture of these 2-Bus mixers includes 2 subgroups, 2 AUX sends (one with Pre/Post-Fader selection; one Pre-Fader operation). All channels feature 3-band EQ, MUTE, AFL, Group and main assignments. A 7-band graphic EQ on the main outputs with precision filters, and a 48 kHz / 24-bit Digital Effect complete the set of tools of these mixers. The Digital Effect features 16 of the most used presets (Hall-Room-Plate reverb, Delay-Echo, and allow to customize one parameter through the Tap-Tempo button. The line consists of 4 models: AlcheMix 402FX, 402UFX, 602UFX and 802UFX with 4, 6 and 8 noiseless Mic/Line preamps. The 402-602-802UFX also feature a 2-In/2-Out USB Stereo Sound Card for recording/playback on PC/Mac at up to 96kHz/24-bit. 8 Total Channels 4 Mic/Line channels with wide-range gain noiseless preamps, XLR and balanced Jack connectors, 75Hz Low-Cut filter, +48V Phantom Power, Signal/Peak Indicator 2 Stereo Line Channels with balanced Jack inputs, with gain and Peak Indicator 3-Band EQ, Pan/Balance, Mute, PFL, Group 1-2, Main L-R, 60mm Volume Fader 2 AUX sends (1 with Pre/Post selection for internal DFX or AUX1 Out; 1 Pre-Fader for AUX2 Out) with channel/master level, AFL, and Jack outputs Effect/AUX Return control with 60mm Fader, Mute, AFL, Group1-2, L-R assignment, and balanced Jack inputs Group 1-2 XLR outputs with 60mm Fader, Mute, AFL, Master Left and Right assignment 7-Band Graphic EQ on Master Bus with precision filters 24-bit/48kHz 16-Preset Digital Effect with Footswitch Out, TAP-Tempo Button and up to 2 Adjustable Parameters for each Preset USB Stereo In/Out Sound Card with up to 96kHz/24-bit recording/playback capability 2-Track In/Out RCA connections and Level control Headphones Stereo Jack Out with Level control XLR Main Outputs with 60mm Fader Control and MUTE Stereo 12-Led VU Meter Bar for Main, PFL/AFL monitoring Stereo Jack Monitor Output Rugged and Lightweight Metal Case. Configuration: 4 Mic/Line + 2 Stereo Nominal Gain (Mic/Line/Stereo Line): 60dB, 40dB, 20dB Max Gain (Mic/Line/Stereo Line): 80dB, 60dB, 40dB Mic Input Sensitivity (Gain Min/Gain Max): -10dBu/-60dBu Line Input Sensitivity (Gain Min/Gain Max): +10dBu/-40dBu Stereo Line Input Sensitivity (Gain Min/Gain Max): +10dBu/-20dBu Aux Return Input Sensitivity: 0dBu / 2-Track Input Sensitivity: -2dBu Mic/Line Max Input Level: +24dB Stereo Line/Aux/2-Track Max Input Level: +20dB Mic Input Impedance: 2kohm Balanced Line/Aux Input Impedance: 20kohm (Balanced)/10kohm (Unbalanced) Tape Record Inputs Impedance: 10kohm Balanced Main/Group/Monitor/Aux Send Output Levels: 0dBu (0.775V RMS) Nominal/ +22dBu (10V RMS) Max Record Out Output Levels: -2dB (600mv RMS)/ +22dBu (10V RMS) Max Main/Group/Monitor/Aux Send Output Impedance: 75ohm Record Output Impedance: 1kohm Phones Output Impedance: 33ohm min Frequency Response: 20Hz to 20kHz (+0/-2dB) Total Harmonic Distortion / Signal-Noise Ratio<0.006% / < -85dB Mono MIC (Treble/Mid/Bass): 15dB (12kHz HF / 2.5 kHz MF/60Hz LF) Stereo Line (Treble/Mid/Bass): 15dB (12kHz HF / 2.5 KHz MF/80Hz LF) Effect: 16 Effects, 24-bit Sigma-Delta, 256-times oversampling, 48kHz sampling rate USB I/O Soundcard: Up to 24-bit/96kHz Stereo Input/Output Streaming, USB Class-2.0 compliant Phantom Power: +48V Power Supply: 150V-240V~50Hz, 15W max Size (WxDxH): 322 x 316.5 x 134 mm Carton Size (WxDxH): 405 x 165 x 392 mm Net Weight: 4.5 kg Gross Weight: 5.5 kg

3 SOUNDSATION ALCHEMIX 402FX 8-Channel High Quality Mixer with 24-bit Digital Multi-Effect. AlcheMix mixer series has been designed to meet the requests of musicians and entertainment operators who need reliable and professional instruments for live shows, rehearsal rooms, schools, home recording, etc. The architecture of these 2-Bus mixers includes 2 subgroups, 2 AUX sends (one with Pre/Post-Fader selection; one Pre-Fader operation). All channels feature 3-band EQ, MUTE, AFL, Group and main assignments. A 7-band graphic EQ on the main outputs with precision filters, and a 48 kHz / 24-bit Digital Effect complete the set of tools of these mixers. The Digital Effect features 16 of the most used presets (Hall-Room-Plate reverb, Delay-Echo, and allow to customize one parameter through the Tap-Tempo button. The line consists of 4 models: AlcheMix 402FX, 402UFX, 602UFX and 802UFX with 4, 6 and 8 noiseless Mic/Line preamps. The 402-602-802UFX also feature a 2-In/2-Out USB Stereo Sound Card for recording/playback on PC/Mac at up to 96kHz/24-bit. 8 Total Channels 4 Mic/Line channels with wide-range gain noiseless preamps, XLR and balanced Jack connectors, 75Hz Low-Cut filter, +48V Phantom Power, Signal/Peak Indicator 2 Stereo Line Channels with balanced Jack inputs, with gain and Peak Indicator 3-Band EQ, Pan/Balance, Mute, PFL, Group 1-2, Main L-R, 60mm Volume Fader 2 AUX sends (1 with Pre/Post selection for internal DFX or AUX1 Out; 1 Pre-Fader for AUX2 Out) with channel/master level, AFL, and Jack outputs Effect/AUX Return control with 60mm Fader, Mute, AFL, Group1-2, L-R assignment, and balanced Jack inputs Group 1-2 XLR outputs with 60mm Fader, Mute, AFL, Master Left and Right assignment 7-Band Graphic EQ on Master Bus with precision filters 24-bit/48kHz 16-Preset Digital Effect with Footswitch Out, TAP-Tempo Button and up to 2 Adjustable Parameters for each Preset 2-Track In/Out RCA connections and Level control Headphones Stereo Jack Out with Level control XLR Main Outputs with 60mm Fader Control and MUTE Stereo 12-Led VU Meter Bar for Main, PFL/AFL monitoring Stereo Jack Monitor Output Rugged and Lightweight Metal Case Configuration: 4 Mic/Line + 2 Stereo Nominal Gain (Mic/Line/Stereo Line): 60dB, 40dB, 20dB Max Gain (Mic/Line/Stereo Line): 80dB, 60dB, 40dB Mic Input Sensitivity (Gain Min/Gain Max): -10dBu/-60dBu Line Input Sensitivity (Gain Min/Gain Max): +10dBu/-40dBu Stereo Line Input Sensitivity (Gain Min/Gain Max): +10dBu/-20dBu Aux Return Input Sensitivity: 0dBu / 2-Track In Input Sensitivity: -2dBu Mic/Line Max Input Level: +24dB Stereo Line/Aux/2-Track Max Input Level: +20dB Mic Input Input Impedance: 2kohm Balanced Line/Aux Input Input Impedance: 20kohm (Balanced)/10kohm (Unbalanced) Tape Record Inputs Input Impedance: 10kohm Balanced Main/Group/Monitor/Aux Output Levels: 0dBu (0.775V RMS) Nominal/ +22dBu (10V RMS) Max Record Out Output Levels: -2dB (600mv RMS)/ +22dBu (10V RMS) Max Main/Group/Monitor/Aux Send Output Impedance: 75ohm Record Output Impedance: 1kohm Phones Output Impedance: 33ohm min Frequency Response: 20Hz to 20kHz (+0/-2dB) Total Harmonic Distortion / Noise Ratio<0.006% / < -85dB Mono MIC EQ (Treble/Mid/Bass): 15dB (12kHz HF / 2.5 kHz MF/60Hz LF) Stereo Line EQ (Treble/Mid/Bass): 15dB (12kHz HF / 2.5 KHz MF/80Hz LF) Effect: 16 Effects, 24-bit Sigma-Delta, 256-times oversampling, 48kHz sampling rate Phantom Power: +48V Power Supply: 150V-240V~50Hz, 15W max Size (WxDxH): 322 x 316.5 x 134 mm Carton Size (WxDxH): 405 x 165 x 392 mm Net Weight: 4.5 kg Gross Weight: 5.5 kg

3 X-PRO 112MA X-PRO 112MA POWERED STAGE MONITOR A totally new member to the X-Series family, this dedicated plywood stage monitor offers the same FBT tone and reliability at a completely new price category. It offers all the power you would need in a compact and affordable box. PRODUCT DESCRIPTION The new X-PRO 112MA monitor is part of the wide range of the XPRO series, renewed with the redesign of all the electronics that allowed to increase the power and add important innovations. The control panel features a three-channel mixer with two microphone/line inputs, a stereo input and a dedicated channel for Bluetooth 5.0; two XLR inputs, stereo input, XLR output with CH1 or mix link selector, hp filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. The use of BLUETOOTH 5.0 (compatible with previous versions) for streaming audio from smartphone / tablet that allows the simultaneous recognition of two speakers with the possibility of controlling their volume remotely, in addition to the use of more performing speakers capable of generating a very high sound pressure, very low distortions and an incredibly natural sound. Also new is the power unit equipped with a switching power supply with automatic voltage change; an internal ventilation system, with intelligent control of the number of revolutions, allows the operating temperatures of the amplifier to be kept low, guaranteeing its silence. The XPRO 112MA speaker is built in plywood, equipped with two integrated handles; the stand insert allows its use also on a stand support or in any free standing situation. KEY FEATURES 2-way bi-amplified bass-reflect design Woofer custom 12" / 2.5 voice coil 1" throat / 1.4" voice coil HF compression driver 1200/300W HF class D amplifier Bluetooth 5.0 3 channels mixer 4 DSP presets Box in plywood with anti-scratch treatment Configuration:2 Way Frequency response:54Hz - 20KHz Low frequency woofer:12"- 2.5" coil High frequency driver:1" - 1.4" coil Maximum SPL cont/peak:24/129 dB Dispersion:80 Degrees Input impedance:22 kOhm Input connector:XLR IN/OUT JACK ST Net Dimension (WxHxD):550 x 320 x 467 Net Weight:16 Kg Power cord:5m Power Requirements:500W

3 SOUNDSATION WF-D290 MKII-A2 adopts a brand-new digital transmission technology and hardware encryption of audio data that enable superior audio quality (compared to analog UHF systems), very-low latency (better than 2.4GHz systems) and maximum security due to the cryptographic hardware. The unique 16bit digital ID pilot technology avoids interferences even on same frequency, and allows continuous exchange of data between transmitters and receiver, such as battery level, transmission power, squelch operation, etc. The system is equipped with automatic frequency scanning and frequency spectrum display, which allow the user to select the less disturbed frequencies in every environment it operates. It features 90 frequencies for each transmitter, divided into 10 groups, each of which contains 9 channels. The user interface is very simple and intuitive, thanks to the TFT color display on the receiver and the simplicity of its setup menus. The handheld transmitter and the bodypack (in case of WF-D290HP), however, are equipped with LCD display with auto-off function, to save battery. The handheld microphone is also equipped with rechargeable lithium battery that can be recharged via the USB port on the back of the receiver. Finally, there are two optional kit for rack mounting of 1 or 2 receivers, respectively, on 1 or 2 standard 19 rack units. UHF E-Band operation (606-613.5 MHz) Digital audio transmission technology Unique digital 16-bit ID pilot technology Transmitter Audio level and Battery-Low monitoring on the Receiver Double antenna diversity technology No crosstalk disturbance even on same frequency Ultra-short audio latency Sampling Frequency: 30Hz-20kHz frequency response Colorful TFT display and menu settings on receiver Auto frequency scanning and spectrum display 50m Ideal Distance (without obstacles) Infrared Tx-Rx synchronization system for quick system setting Professional Handheld Microphone with Professional Dynamic Cardioid Capsule and rechargeable Lithium Battery Rack-Mount Kit for 1 or 2 receiver units to 1x or 2x 19" rack unit (optional) Detachable Antennas with BNC connectors Carrier Frequency: UHF 606-613.5 MHz Bandwidth: 9 MHz Channel Bandwidth: 100 kHz Preset Group/Channel: 10 groups, 7 frequencies in each group Dynamic Range: >98 dB Total Harmonic Distortion: <0.1% Frequency Response: 30 Hz-20 kHz/2 dB Audio Output Level: Balanced 400mV; Unbalanced 400mV Packing Dimensions (WxHxD): 436x104x324 mm Packing Gross Weight: 2.5 kg Receiver Power Supply: DC 12V/1000 mA Receiver Consume Power: 5 W Signal/Noise Ratio: >98 dB Receiving Sensitivity: -95 dBm Transmission Delay: <3 ms Receiver Dimensions (WxHxD): 210x45x118 mm (antennas not incl.) Receiver Antennas: 255 mm (not bent) with BNC connectors Net Weight: 0.4 kg Transmitter Power: 10 mW (Max) Modulation Type: DQPSK Battery Voltage Handheld Transmitter: 1x3.7 V - 1200 mAh Lithium Rechargeable Battery (type 18500) Continuous Using: 5 hours (HI Trans. power); 7 hours (LO Trans. power) Battery Charge Time: About 3,5 hours Hand-held Mic. Dimensions (W/DxH): 35(min)-46(max)x240 mm Hand-held Mic. Net Weight: 0.26 kg (batteries included)

3 SOUNDSATION HYPER 8 STREET Battery Active Portable PA Speaker with BT connection. https://youtu.be/REBJi65aFNg The starting point from which Soundsation drew inspiration for the new Hyper 8 Street portable PA is the desire to make music everywhere you go. You dont want and you dont have to carry large equipment, but you also dont want the sound quality to be compromised. Hyper 8 Street is an all-in-one solution that integrates an active 2-way coaxial speaker, a 200W class-D amplifier and DSP with 4 presets, a mixer with 2 Mic/Line inputs, 1 Line Stereo input and 1 channel with BT connection. Everything is packed in a sturdy, lightweight cabinet ready for any use (in vertical position on the ground or on a 35mm support, inclined upwards or horizontally like a stage monitor). The 5,400mAh lithium battery ensures a running time of 4 hours. In short, Hyper 8 Street is the answer to the maximum freedom of expression, the desire to be together and to make music outdoors. High versatility (Multipurpose and Compact) All-in-One System with Mixer, 240W Class-D Power Amplifier, Multiple BT Streaming Superior Audio Quality thanks to Coaxial Transducers and Vented Design DSP with 4 Presets to adapt the speaker to the most frequent uses BT Master/Slave connection with another Hyper 8 Street units for Stereo Systems Lithium Battery with 4h Capacity Product type: Battery Portable PA Active Speaker Low/High driver Dimensions: 8 + 1" (coaxial) Amplifier: Class D RMS/Program Power: 120W/240W Frequency response: 50Hz-20kHz SPL(1W/1m): 95dB Max. SPL: 120dB Protection circuits: Short circuit overcurrent Controls: Master, Line Gain, Bass/Treble, Power, Mic Gain Indicators: Charge/Battery Status, Power Supported media: 2x XLR-6.3mm Jack Combo, RCA, 3.5mm Mini-Jack, BT Audio Streaming Line inputs: 3 Line input connectors: RCA, 6.3mm Jack/XLR, 3.5mm Mini-Jack Mic inputs: XLR/6.3mm Jack Combo Mix outputs: 6.3mm Jack Operating Voltage: DC 19V - 2500mA (External Power Adapter included) Battery Capacity: 4-hour 100% Power / 7-hour 50% Power / 14.8V-5,400mAh Cabinet material: Polypropylene Cabinet construction: Vented Other features: 36mm Pole-Mount Hole, Transport Handle Dimensions: 398 x 338 x 284mm Speaker Weight: 8,3kg Packing Size: 410 x 362 x 515mm Weight: 9.5kg

3 On Demo at Sound Lease Ballymount Irish FBT Dealers . https://youtu.be/bU_vkymoGzI X-PRO 112A 1200W + 300W - 12" + 1" Active Speaker with Bluetooth The X-PRO 112A offers the FBT quality and sound at an incredible price. High Power, Mixer Section, Bluetooth 5.0, Fan Cooled, 4 DSP Presets, Plywood Cabinet. PRODUCT DESCRIPTION The FBT XPRO 112A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded plywood cabinet construction. Available in black finish, the FBT XPRO 112A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XPRO 112A cabinet also allows use as a powered floor stage monitor. The FBT XPRO 112A is two way design incorporating a 12 low frequency woofer and 1 HF compression driver coupled to a 80H x 50V rotatable constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XPRO 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. The bi-amplified FBT XPRO 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, xlr output with ch1 or mix link selector, hp filter, two mic-line selectors, dsp preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XPRO 112A speaker to be surface mounted on walls or ceilings. A standard 1.38 speaker stand socket allows the FBT XPRO 112A to be mounted on speaker stand. KEY FEATURES 2-way bi-amplified system Plywood cabinet Woofer custom 12LF / 2.5 voice coil 1 throat / 1.4 voice coil HF compression driver 1200/300W built-in amplifier max (LF/HF) Bluetooth 5.0 3 channels mixer 35 monitor taper 4 DSP presets 80 H x 50 V rotatable constant directivity horn Universal switching mode power supply 100-240 VAC M10 rigging points

3 X-LITE 110A 10" Powered Speaker with Built-in Bluetooth The FBT XLITE 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected moulded polypropylene cabinet construction. Available in black finish, the FBT XLITE 110A series speakers provide excellent sound and an elegant design for portable sound and fixed installation. PRODUCT DESCRIPTION The FBT XLITE 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 110A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XLITE 110A cabinet also allows use as a powered floor stage monitor. The FBT XLITE 110A is two way design incorporating a 10 low frequency woofer and 1 HF compression driver coupled to a 90H x 60V constant directivity horn. With a frequency range of 58Hz - 20kHz the FBT XLITE 110A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. The bi-amplified FBT XLITE 110A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 110A speaker to be surface mounted on walls or ceilings. A standard 35mm speaker stand socket allows the FBT XLITE 110A to be mounted on speaker stand KEY FEATURES 2 way bi-amplified bass reflex system Polypropylene moulded enclosure Custom 10" woofer (LF) / 2.5" voice coil 1" throat / 1.4" voice coil HF compression driver 1200w / 300w Built-In amplifier (LF / HF) Bluetooth 5.0 3-Channel mixer 4 DSP Presets 30 degrees & 45 degrees monitor tapers Universal switch mode power supply 100-240 VAC M10 rigging points Configuration:2 Way Frequency response:58Hz - 20KHz Low frequency woofer:10" - 2.5" VC High frequency driver:1" - 1.4" VC Maximum SPL cont/peak:123/127 dB Dispersion:90 x 60 Input impedance:22 Input connector:XLR IN/OUT Net Dimension (WxHxD):300 x 536 x 301.5 Net Weight:13 KG Transport Dimension (WxHxD):370 x 615 x 380 Transport Weight:14.8 KG Built in amplifier peak:LF 1200w HF 300w

3 EQUINOX SPECTRAPIX BATTEN The SpectraPix Batten contains 224 SMD 5050 RGB LEDs divided into 16 segments. They feature a wide 120 viewing angle and feature a milky, frost effect front screen along with clear front screen to further expand the versatility of this fixture. Onboard features include colour mixing to create soft washes from its rich colour palette, and chase programs controlled in auto mode or activated by music. A number of chase programs are included and can be selected by the control panel along with speed and variable strobe. Features 224 tri-colour SMD 5050 LEDs (RGB) Viewing angle: 120 Refresh rate: 2.1kHz DMX channels: 3/3/5/24/48 or 53 selectable Static colour, auto, sound active and master/slave modes plus built-in programs 0-100% dimming and variable strobe Bracket allows for multiple rigging or floor standing applications 4 push button menu with LED display IEC power input/output 3-Pin XLR input/output Convection cooled Weight:1.5kgDimensions (H x W x D):85 x 1035 x 60mm Fuse:F3A 250VPower consumption:50W Power supply:100~240V, 50/60Hz

3 OUMIX-402 MEDIA 8-Channel Professional Mixer with Media Player, BT and Digital Multi Effect YouMix series combines maximum portability with preamp quality, and filters and controls accuracy. The use of high quality SMD components allow us to concentrate functions that normally require much more space, such as the 60mm volume sliders, the SOLO function, a single display for both digital multi-effect and USB player, the BT connection. This series includes two models with 2 and 4 mic/line channels (plus 2 Line stereo inputs): YouMix-202 Media and YouMIx-402 Media. They are ideal for live music, home recording, podcasting, and all those applications where you need to integrate all main functions of a professional mixing console into a single tool. The mic preamps offer high headroom and low noise, to guarantee a clean and natural sound with all source types: condenser microphones (with +48V Phantom Power), dynamic mics, line signals and high impedance instruments. The digital multi-effect offers 256 presets that cover all the most used effects (Room, Hall, Vocal, and Plate reverbs; Delay; Echo; Chorus; Flanger, and Combo). The USB player accepts files in MP3 format (up to 48kHz 32-bit @ 320kbps); the BT receiver assures professional audio streaming. Both use one of the two stereo Line inputs and offer the advantage of in-line channel controls (Gain, 2-band EQ, FX Send, Pan and Solo). YouMix essentially represents the compact solution with superior performance to all those mixing requirements where the quality of the result cannot be secondary.

3 MIOMIX 404FXM 6-Channel Professional Audio Mixer with Media Player, BT & 24-bit Digital Multi-Effect MioMix 404FXM is a 6-channel mixer with USB player and digital multi-effect ideal for small home recording, live gigs and podcasting applications that require professional quality level and maximum portability. 4 Mic inputs are equipped with noise-less preamps that accepts all main sound sources, such as condenser microphones - thanks to the +48V Phantom Power, dynamic mics, line and high-impedance inputs (guitars, basses, etc.). The stereo line input allow you to connect keyboards, CD players, DJ consoles, tablets, smartphones, etc. The USB & BT player accepts WAV, MP3, WMA and FLAC format audio files, as well as wireless audio streaming (BT). It also records your gig in MP3 format (48kHz/16bit @ 128Kbps). The 24-bit/48kHz digital effect with 16 commonly used presets (Hall/Room/Plate Reverb, Delay, Echo, Chorus, etc.) and TAP-Tempo function let you improve your performance and adjust up to two parameters of each effect. An indispensable and reliable tool for all small audio applications. SPECIFICATIONS KEY FEATURES 6 Total Channels 4 Mic/Line channels with noiseless preamp, combo connector, Hi-Z input for guitars, +48V Phantom Power, Peak Indicator 1 Stereo Line Channel with Jack inputs, +4/-10dB Pad Adapter and Peak Indicator USB Media Player and Recorder (WAV, MP3, WMA, FLAC and BT wireless audio streaming) 2-Band EQ for channels 1 to 4 24-bit/48kHz 16-Preset Digital Effect with TAP-Tempo and up to 2 adjustable Parameters Media Player output level control Headphone monitor out with level control XLR Main Outputs with Master Level Control Stereo 6-Led VU Meter Bar Rugged and Lightweight Metal Case for Maximum Flexibility and Portability.

3 Finance this Item with Flexi fi Quote link below. https://apply.flexifi.com/s/quote?toURL=Quote&src=0011n00002NEhQZAA1 Ev sub cover 65. EVOLVE 30M Portable powered column system Mix your show like a pro Optimize every detail of your sound Room-filling coverage Super-quick setup Single-trip portability White version coming soon Superior Electro-Voice sound quality coupled with the most complete feature set in its class the perfect combination of performance and flexible functionality, in a very compact package The EVOLVE 30M is designed to deliver a significant step up in all-around performance for a column system in its size/price category. It includes an eight-channel digital mixer, studio-quality onboard effects, and remote control of all audio, effects and mix functions via the next-generation Electro-Voice QuickSmart Mobile application (available via the Apple Store and on Google Play). Read more The system includes a speaker array, a two-piece pole connector, an array and pole backpack carry case, and a powered subwoofer all made to pack up and assemble quickly, look great on stage, and withstand real-world wear and tear. All this makes it an outstanding choice for solo musicians/performers and smaller musical groups and venues or any application that needs an easy-to-use, highly portable and lightweight system with extraordinary connectivity, control, coverage and output relative to its footprint. For events such as weddings, the mixer allows the same system to support the various mics and inputs required for participants, musicians, and background music during the day, all with plenty of power to fill the dance floor for a DJ set or live performance in the evening. Refined industrial design, professional-grade EV-engineered components and premium build quality super-quick setup and single-trip portability in a system that looks as good as it sounds All set the EVOLVE 30M apart from other systems at its price point. The full-range column array and its six lightweight 2.8 neodymium drivers provide ultra-wide 120 coverage via proprietary waveguides; array-formed 40 asymmetrical vertical coverage ensures acoustic output is directed towards both sitting and standing audience members. The array enclosure is constructed from a durable composite material and incorporates an ergonomic aluminum handle. It is acoustically optimized using four tuning ports hidden out of sight on the rear of the enclosure. A 10 subwoofer is housed in a 15 mm wood enclosure with a high-efficiency laminar-flow vent design, for enhanced rigidity and acoustical performance. The array and sub are connected via a two-piece symmetrical aluminum pole with internal wiring and magnetically assisted latching. An advanced Class-D amplifier provides up to 1000 W of power: 500 W to the subwoofer and 500 W to the column array. The speakers are protected by a black powder-coated 18-gauge steel grille. Combined, these elements generate a genuinely impressive performance-to-size ratio in an elegant form factor that looks as good as it sounds. Industry-leading QuickSmart DSP optimize every detail of your sound via the control panel or via the app from across the room QuickSmart DSP allows navigation of system parameters via an LCD with single-knob control, as well as multiple options for signal routing and inputs. Functions include four presets (Music, Live, Speech, Club), three-band system EQ (low, mid, high), seven-band graphic EQ (in Mixer mode), five user-programmable presets (Store and Recall settings), phantom power, visual monitoring of limiter status, input level control and meters, and a master volume control to optimize gain structure. All of the above audio functions can also be controlled via the QuickSmart Mobile app precisely adjust your systems sound from across the room, hearing what the audience hears. The fully configurable app has an intuitive, easy-to-read user interface and utilizes Bluetooth* Low Energy (BTLE) technology for the adjustment and monitoring of all parameters of up to six EVOLVE 30M systems simultaneously. EVOLVE 30M offers simple or sophisticated operation according to application, making great sound easy for users of all levels. Mix your show like a pro powerful onboard mixer gives you best-in-class connectivity and control Developed in collaboration with the world-class audio electronics engineering team at EVs sibling brand Dynacord, the integrated fully featured, fully configurable digital mixer has multiple inputs (4x XLR/TRS combo mic/line inputs, 1x XLR/TRS combo stereo line input, 1x RCA, 1x 3.5 mm stereo, 1x Hi-Z instrument input) with professional-grade preamps and mix functions. The mixer can be controlled via the QuickSmart Mobile app or via the single-knob/LCD interface. Finesse your sound with musician-friendly features and reduce the amount of gear you bring to the gig Independent channel aux sends and Hi-Z and foot switch inputs are included for flexible system configuration, and a range of onboard studio-quality effects (30 presets, including chorus, delay, flange and reverb, via two FX channels) add myriad options for fine-tuning. Along with the built-in mixer, these help to reduce setup time -- and on-stage clutter -- by minimizing the need for external effects pedals and processors. The onboard effects can be controlled via the QuickSmart Mobile app or via the single-knob/LCD interface. High-resolution, low-latency Bluetooth* streaming ensures excellent results for music playback or accompaniment. *Bluetooth is available in select countries. The EVOLVE 30M joins the larger EVOLVE 50 in the award-winning Electro-Voice EVOLVE column speaker system series. Specifications Frequency response (-3 dB)1 51 Hz to 20 KHz Frequency range (-10 dB)1 45 Hz to 20 KHz Maximum SPL2 123 dB Specifications Coverage (H x V) 120 x 40 Amplifier rating 1000 W LF channel rating 500 W HF channel rating 500 W Crossover frequency 200 Hz Connectors 4x XLR/TRS Combo Jack Line / Mic Input 1x 1/4" TRS HI-Z input 2x XLR/TRS Combo Jack for Stereo Line Input 1x Stereo RCA Input 1x 3.5 mm Stereo Input 1x Wireless Stereo Bluetooth Audio Input 1x 1/4" Foot Switch Input 1x XLR MIX OUT Output 1x XLR AUX OUT Output Enclosure Sub: 15 mm plywood Column: Composite Pole: Aluminum Grille: Steel with black or white powder coat Color: Black or white Dimensions (HxWxD): mm (in) Sub: 448 x 332 x 432 (17.6 x 13.1 x 17) Column: 620 x 95 x 157 (24.4 x 3.7 x 6.2) Pole (2 pcs): 600 x 48 x 55 (23.6 x 1.9 x 2.2) Net weight Sub: 34.9 lb (15.8 kg) Column: 6.0 lb (2.7 kg) Pole (2 pcs): 3.1 lb (1.4 kg) Bag for column and pole: 1.9 (0.85 kg) Shipping weight 53.4 lb (24.2 kg) Power consumption3 100-240 V AC, 50-60 Hz, 1.5-0.6 A

3 The SC-615 is a compact, highly intelligible speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel bracket and screws ensure the units weatherproof capability. 15W Input (mobile mount, 10W). Low Impedance (8 ). Stainless steel brackets and hardware. Shock resistant aluminium oval horn. Unobtrusive off-white colour. Compliance with IP-65. Specification Rated Input15W (mobile mount use, 10W) Line Voltagen / a Rated Impedance8 Sound Pressure Level112dB, 1W / 1m at 500 to 2,500 Hz peak level). Frequency Response280 ~ 12,500Hz Sensitivity when used as Microphone(0 dB = 1 mW/10 dynes/cm 2) -22 dB at 1 kHz IP GradeIP65 PolarityHot; Black wire, com; White wire Operating Temperature-20 ~ +55C (must be free from dew condensation) FinishHorn flare: Aluminum, off-white, powder coating / Reflector horn and rear cover: ABS resin, off-white / Bracket, Screws and bolts: Stainless steel / Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length) Dimensions 222 (W) x 179 (H) x 234 (D) mm Weight1.1 kg Material Aluminium OptionSwivel bracket: YS-151S (Can be used instead of the supplied bracket.)