3 Ideal for roofing, balconies, gutters, car parks, decks and more. Seamless, Flexible and Durable. Bubble and defect-free membrane. Can be used on new builds and other roof substrates. Reinforcement layers are generally not required. Excellent weather and UV resistance - rain resistant within just 30 minutes. Fast and easy to apply. Excellent thermal resistance. Cold resistance: LAVA 20 remains flexible down to -40C. Excellent mechanical properties, high tensile and tear strength, high abrasion and tear resistance. CE and BBA certified.

3 Ideal for roofing, balconies, gutters, car parks, decks and more. Seamless, Flexible and Durable. Bubble and defect-free membrane. Can be used on new builds and other roof substrates. Reinforcement layers are generally not required. Excellent weather and UV resistance - rain resistant within just 30 minutes. Fast and easy to apply. Excellent thermal resistance. Cold resistance: LAVA 20 remains flexible down to -40C. Excellent mechanical properties, high tensile and tear strength, high abrasion and tear resistance. CE and BBA certified.

3 Wall Guard Stops Door Knob Damage A peeln stick protective patch for use on walls where door knob may cause or has caused damage, a problem common on drywall. Wall Guard is backed with foam to absorb the impact of doors knob. Wall Guards can be painted or wallpapered to match surrounding area.

3 Anyone can patch a hole in drywall in minutes with the Wall Patch Metal self-adhesive patch adheres to wall to cover hole. The easiest way to permanently patch holes in drywall. Metal self-adhesive patch adheres to wall to cover hole, just spackle and paint to finish. Three easy steps and your damaged wall is fixed. So easy anyone can fix a hole in drywall in minutes. Easy & Fast Repair of Drywall Size Available: 6 x 6

3 Homax Fibreglass Mesh Tape for Cracks etc Fibreglass Mesh Tape is a strong reinforcing tape whichstrengthens joint between drywall boards to resist movement damage. Product Usages Self adhesive tape reduces taping time with no bedding 'mud' required. Ideal for all Drywall repair or installation jobs. Roll size: 2" x 65 ft

3 A specially formulated paint additive designed to produce a tough and long wearing slip resistant surface that helps to prevent slip and fall accidents. Suitable for any kind of paint. Can be used in many locations including decking, ladders, stairways, ramps, handrails and porches. Suitable for any kind of paint. Keep a Packet Handy for your next painting project. Part nbr 8600 One packet is suitable for 4L paint.

3 Owatrol EB E-B EB is added to first coat of any water based paint - eliminates the need for time consuming, application of a separate coat of primer / or paint stabiliser. Not For Clears - Only Paint. EB does not change the colour of the paint. No point in painting walls etc if the paint blisters and peels of again - all that work and expense for nothing. When you use EB as part of your FIRST coat, you can rest assured that your paint will stay where you put it! Note: First coat means first coat of current painting job, irrespective of whether it is a new or previously painted wall. Bonds water based paints to chalky, powdery or porous surfaces. Added to first coat (only) of interior emulsion over new plasterwork /skimcoat ensures paint does not peel off Improves hiding power and coverage Allows you to use masonry paints on wide range range of substrates for long life, no peel results example wooden fencing paint any colour, cladding, decking spindles, terracotta pots, paving slabs etc EB is a stir-in bonding additive, paint stabiliser for all water based paints, exterior and interior. Can be used on all surfaces and is especially suitable as a stabiliser, primer for unstable, chalky and powdery surfaces as well as for difficult surfaces such as glass, plastic, wood, varnished surfaces etc. Can be mixed into the first coat of paint or used neat. Most common mix ratio is 3 parts paint to 1 part EB but can be stronger for really bad surfaces. Example: 10L bucket of emulsion. Pour out 2.5L (1/4) into another bucket and replace it with 2.5 L of EB.. this tops up the 10L again but 1/4 of the contents is EB... 3:1 mix. Calculate that the 2.5L of paint you poured out earlier can be part of what you need for the second coat. Properties [VIDEO Shows Plastered Wall That Was Painted Without A Proper Primer... Paint Fell Off] EB mixed into first coat of any water based paint, soaks deep into the substrate or grips to shiny surface and does away with the need for a separate coat of stabiliser... thereby saving you work and money. Increases paint hiding power - ensures even coverage and maximum adhesion between the first and second coat of paint. EBs high solids maintains the inherent characteristics of the paint and increases paint coverage by up to 20%. Stops paint peeling from surfaces prone to same. Enables you apply water based paints to vast variety of substrates otherwise not possible without risk of peeling. Wood, MDF etc. Application Always test for compatibility; for use in water based paints only. Make sure the surface is clean and free from grease; remove any flaky paint. Ratios of mix required. Basic rule is, the worse the substrate, the stronger the mix. Chalky walls, minimum of 4:1 (4 paint : 1 EB) Average flaky walls, 3:1, badly flaking wall 2:1 and in extreme cases use 1:1 or even neat. For non-masonry surfaces such as wooden fencing etc a 3:1 ration minimum in exterior quality masonry paints is recommended. Allow to dry for 24-48h.) Use E-B in first coat of (water based) paint only. After application of the EB/paint mix allow to dry aprox 4 hours. EB is added to first coat only. Apply second coat of paint without E-B. Application tools : brush, roller, airless spray. Application temperature : 5C to +35C Drying time : 2 to 4 h. Recoating time : 4 h. Clean up : Soap + Water (Brushes etc may need additional wash with white spirit) PLEASE CONTACT FOR LARGER SIZES AND PRICES.

3 Stir-In Stabilising Solution or Primer "Welds" Emulsions and Masonry Paints To Virtually Any Surface and Stops That Paint Peeling Off Later. EB is The First Choice Of Most Top Rated Professional Painter Decorators for New and Refurb Work. >> Mouse or Click On The Photos For More Information On Same. << EB is added to first coat of any water based paint - eliminates the need for time consuming, application of a separate coat of primer / or paint stabiliser. Not For Clears - Only Paint. EB does not change the colour of the paint. No point in painting walls etc if the paint blisters and peels of again - all that work and expense for nothing. When you use EB as part of your FIRST coat, you can rest assured that your paint will stay where you put it! Note: First coat means first coat of current painting job, irrespective of whether it is a new or previously painted wall. Bonds water based paints to chalky, powdery or porous surfaces. Added to first coat (only) of interior emulsion over new plasterwork /skimcoat ensures paint does not peel off Improves hiding power and coverage Allows you to use masonry paints on wide range range of substrates for long life, no peel results example wooden fencing paint any colour, cladding, decking spindles, terracotta pots, paving slabs etc EB is a stir-in bonding additive, paint stabiliser for all water based paints, exterior and interior. Can be used on all surfaces and is especially suitable as a stabiliser, primer for unstable, chalky and powdery surfaces as well as for difficult surfaces such as glass, plastic, wood, varnished surfaces etc. Can be mixed into the first coat of paint or used neat. Most common mix ratio is 3 parts paint to 1 part EB but can be stronger for really bad surfaces. Example: 10L bucket of emulsion. Pour out 2.5L (1/4) into another bucket and replace it with 2.5 L of EB.. this tops up the 10L again but 1/4 of the contents is EB... 3:1 mix. Calculate that the 2.5L of paint you poured out earlier can be part of what you need for the second coat. Properties [VIDEO Shows Plastered Wall That Was Painted Without A Proper Primer... Paint Fell Off] EB mixed into first coat of any water based paint, soaks deep into the substrate or grips to shiny surface and does away with the need for a separate coat of stabiliser... thereby saving you work and money. Increases paint hiding power - ensures even coverage and maximum adhesion between the first and second coat of paint. EBs high solids maintains the inherent characteristics of the paint and increases paint coverage by up to 20%. Stops paint peeling from surfaces prone to same. Enables you apply water based paints to vast variety of substrates otherwise not possible without risk of peeling. Wood, MDF etc. Application Always test for compatibility; for use in water based paints only. Make sure the surface is clean and free from grease; remove any flaky paint. Ratios of mix required. Basic rule is, the worse the substrate, the stronger the mix. Chalky walls, minimum of 4:1 (4 paint : 1 EB) Average flaky walls, 3:1, badly flaking wall 2:1 and in extreme cases use 1:1 or even neat. For non-masonry surfaces such as wooden fencing etc a 3:1 ration minimum in exterior quality masonry paints is recommended. Allow to dry for 24-48h.) Use E-B in first coat of (water based) paint only. After application of the EB/paint mix allow to dry aprox 4 hours. EB is added to first coat only. Apply second coat of paint without E-B. Application tools : brush, roller, airless spray. Application temperature : 5C to +35C Drying time : 2 to 4 h. Recoating time : 4 h. Clean up : Soap + Water (Brushes etc may need additional wash with white spirit) EB is by far the most cost effective way of making any water based paint stick to a wide variety of substrates. Order EB Today.

3 Stir-In Stabilising Solution or Primer "Welds" Emulsions and Masonry Paints To Virtually Any Surface and Stops That Paint Peeling Off Later. EB is The First Choice Of Most Top Rated Professional Painter Decorators for New and Refurb Work. >> Mouse or Click On The Photos For More Information On Same. << EB is added to first coat of any water based paint - eliminates the need for time consuming, application of a separate coat of primer / or paint stabiliser. Not For Clears - Only Paint. EB does not change the colour of the paint. No point in painting walls etc if the paint blisters and peels of again - all that work and expense for nothing. When you use EB as part of your FIRST coat, you can rest assured that your paint will stay where you put it! Note: First coat means first coat of current painting job, irrespective of whether it is a new or previously painted wall. Bonds water based paints to chalky, powdery or porous surfaces. Added to first coat (only) of interior emulsion over new plasterwork /skimcoat ensures paint does not peel off Improves hiding power and coverage Allows you to use masonry paints on wide range range of substrates for long life, no peel results example wooden fencing paint any colour, cladding, decking spindles, terracotta pots, paving slabs etc EB is a stir-in bonding additive, paint stabiliser for all water based paints, exterior and interior. Can be used on all surfaces and is especially suitable as a stabiliser, primer for unstable, chalky and powdery surfaces as well as for difficult surfaces such as glass, plastic, wood, varnished surfaces etc. Can be mixed into the first coat of paint or used neat. Most common mix ratio is 3 parts paint to 1 part EB but can be stronger for really bad surfaces. Example: 10L bucket of emulsion. Pour out 2.5L (1/4) into another bucket and replace it with 2.5 L of EB.. this tops up the 10L again but 1/4 of the contents is EB... 3:1 mix. Calculate that the 2.5L of paint you poured out earlier can be part of what you need for the second coat. Properties [VIDEO Shows Plastered Wall That Was Painted Without A Proper Primer... Paint Fell Off] EB mixed into first coat of any water based paint, soaks deep into the substrate or grips to shiny surface and does away with the need for a separate coat of stabiliser... thereby saving you work and money. Increases paint hiding power - ensures even coverage and maximum adhesion between the first and second coat of paint. EBs high solids maintains the inherent characteristics of the paint and increases paint coverage by up to 20%. Stops paint peeling from surfaces prone to same. Enables you apply water based paints to vast variety of substrates otherwise not possible without risk of peeling. Wood, MDF etc. Application Always test for compatibility; for use in water based paints only. Make sure the surface is clean and free from grease; remove any flaky paint. Ratios of mix required. Basic rule is, the worse the substrate, the stronger the mix. Chalky walls, minimum of 4:1 (4 paint : 1 EB) Average flaky walls, 3:1, badly flaking wall 2:1 and in extreme cases use 1:1 or even neat. For non-masonry surfaces such as wooden fencing etc a 3:1 ration minimum in exterior quality masonry paints is recommended. Allow to dry for 24-48h.) Use E-B in first coat of (water based) paint only. After application of the EB/paint mix allow to dry aprox 4 hours. EB is added to first coat only. Apply second coat of paint without E-B.

3 Solvent free paint remover, paint stripper strips up to 8 coats at one application removing paint, wax and varnish Simple water rinse off. Easy to apply gel consistency doers not run ideal for vertical surfaces Does not dry long active working time (up to 12 hours) Removes up to 8 coats of paint, varnish, stains and most anti-fouling paints Strips ornate or intricate surfaces fast and easy Properties Does not contain solvent or paraffin non flammable. Strips waxes, varnish, paint and most antifouling paints. Coating becomes soluble with water (rinse with water). Strips up to 8 coats of paint in 1 application. Easy to apply, even on the most difficult or intricate surfaces Does not evaporate will not dry. Softens the paint layers without supervision. Where to use Use on wood (Except Oak, Chestnut, Parquet and Veneer), metals (except Aluminum), plastic, stone, cement Ideal for difficult to strip surfaces such as ornate, horizontal and vertical doors, gates, stone etc. Recommended for stripping large areas non-flammable, does not dry out, remains active a long time. Does not attack plastics, rubber, synthetic coating or fibreglass gel coats (GRP boats etc). Recommendations for use Always test a small area first. Wear protective gloves rubber, nitrile. Use nylon/synthetic brushes. Working time for stripping the finish varies from minutes to hours depending on the type of finish being removed (oil-based or water-based) and number of coats. Check the stripping action from time to time to establish when full removal of the finish(s) can be performed. Always neutralise surface with Net-trol (diluted 4:1) after stripping. Directions for use Apply a thick layer of Dilunett to surface to be stripped. Allow to stand. If the Dilunett paint remover starts to dry, apply a fine mist of water to keep active. Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar / 870 psi & not too close to the wood). Using hot water makes stripping the paint easier. After stripping wood, always neutralise with Net-trol, diluted 4:1 with water immediately after rinsing the Dilunett. Refer to packaging for full instructions.

3 Simple water rinse off. Easy to apply gel consistency doers not run ideal for vertical surfaces Does not dry long active working time (up to 12 hours) Removes up to 8 coats of paint, varnish, stains and most anti-fouling paints Strips ornate or intricate surfaces fast and easy Properties Does not contain solvent or paraffin non flammable. Strips waxes, varnish, paint and most antifouling paints. Coating becomes soluble with water (rinse with water). Strips up to 8 coats of paint in 1 application. Easy to apply, even on the most difficult or intricate surfaces Does not evaporate will not dry. Softens the paint layers without supervision. Where to use Use on wood (Except Oak, Chestnut, Parquet and Veneer), metals (except Aluminum), plastic, stone, cement Ideal for difficult to strip surfaces such as ornate, horizontal and vertical doors, gates, stone etc. Recommended for stripping large areas non-flammable, does not dry out, remains active a long time. Does not attack plastics, rubber, synthetic coating or fibreglass gel coats (GRP boats etc). Recommendations for use Always test a small area first. Wear protective gloves rubber, nitrile. Use nylon/synthetic brushes. Working time for stripping the finish varies from minutes to hours depending on the type of finish being removed (oil-based or water-based) and number of coats. Check the stripping action from time to time to establish when full removal of the finish(s) can be performed. Always neutralise surface with Net-trol (diluted 4:1) after stripping. Directions for use Apply a thick layer of Dilunett to surface to be stripped. Allow to stand. If the Dilunett paint remover starts to dry, apply a fine mist of water to keep active. Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar / 870 psi & not too close to the wood). Using hot water makes stripping the paint easier. After stripping wood, always neutralise with Net-trol, diluted 4:1 with water immediately after rinsing the Dilunett. Refer to packaging for full instructions.

3 Solvent Free Paint Remover, Paint Stripper Safe For All Surfaces. Solvent free paint remover, paint stripper strips up to 8 coats at one application removing paint, wax and varnish Simple water rinse off. Easy to apply gel consistency doers not run ideal for vertical surfaces Does not dry long active working time (up to 12 hours) Removes up to 8 coats of paint, varnish, stains and most anti-fouling paints Strips ornate or intricate surfaces fast and easy Properties Does not contain solvent or paraffin non flammable. Strips waxes, varnish, paint and most antifouling paints. Coating becomes soluble with water (rinse with water). Strips up to 8 coats of paint in 1 application. Easy to apply, even on the most difficult or intricate surfaces Does not evaporate will not dry. Softens the paint layers without supervision. Where to use Use on wood (Except Oak, Chestnut, Parquet and Veneer), metals (except Aluminum), plastic, stone, cement Ideal for difficult to strip surfaces such as ornate, horizontal and vertical doors, gates, stone etc. Recommended for stripping large areas non-flammable, does not dry out, remains active a long time. Does not attack plastics, rubber, synthetic coating or fibreglass gel coats (GRP boats etc). Recommendations for use Always test a small area first. Wear protective gloves rubber, nitrile. Use nylon/synthetic brushes. Working time for stripping the finish varies from minutes to hours depending on the type of finish being removed (oil-based or water-based) and number of coats. Check the stripping action from time to time to establish when full removal of the finish(s) can be performed. Always neutralise surface with Net-trol (diluted 4:1) after stripping. Directions for use Apply a thick layer of Dilunett to surface to be stripped. Allow to stand. If the Dilunett paint remover starts to dry, apply a fine mist of water to keep active. Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar / 870 psi & not too close to the wood). Using hot water makes stripping the paint easier. After stripping wood, always neutralise with Net-trol, diluted 4:1 with water immediately after rinsing the Dilunett. Refer to packaging for full instructions.

3 Owatrol Deco is an oil-based, non-peel multi-surface paint suitable for all surfaces with built-in rust inhibiting qualities. It comes in 13 decorative finishes and does not require any priming or undercoating before use. With Owatrol Oil technology, Owatrol Deco provides exceptional corrosion protection and excellent resistance to the effects of weathering and pollution. It can be applied directly to rusted surfaces as it penetrates down to the sound metal, providing long-lasting protection and extending the lifetime of the treated surface. Owatrol Deco is suitable for interior and exterior uses and will adhere to all surfaces. Because of its high gloss finish, which is extremely flexible, it will not peel or flake making it perfect for use on flexible surfaces like plastics and uPVC. Not only that but it is safe to use in confined spaces as it does not emit harmful fumes. It delivers an exceptional oil-based finish with very low VOC levels. Ideal Uses for Owatrol Deco Multi-Surface Paint Reviving plastic guttering and drainpipes without having to replace them Painting your uPVC window and door frames for a fresh new look Protecting pipe work and machinery parts from corrosion Finishing agricultural or industrial buildings Protecting and re-painting rusted gates and metal railings Re-painting radiators as it can withstand temperatures up to 175C

3 Owatrol Deco Multipurpose Paint Owatrol Deco is an oil-based, non-peel multi-surface paint suitable for all surfaces with built-in rust inhibiting qualities. It comes in 13 decorative finishes and does not require any priming or undercoating before use. With Owatrol Oil technology, Owatrol Deco provides exceptional corrosion protection and excellent resistance to the effects of weathering and pollution. It can be applied directly to rusted surfaces as it penetrates down to the sound metal, providing long-lasting protection and extending the lifetime of the treated surface. Owatrol Deco is suitable for interior and exterior uses and will adhere to all surfaces. Because of its high gloss finish, which is extremely flexible, it will not peel or flake making it perfect for use on flexible surfaces like plastics and uPVC. Not only that but it is safe to use in confined spaces as it does not emit harmful fumes. It delivers an exceptional oil-based finish with very low VOC levels. Ideal Uses for Owatrol Deco Multi-Surface Paint Reviving plastic guttering and drainpipes without having to replace them Painting your uPVC window and door frames for a fresh new look Protecting pipe work and machinery parts from corrosion Finishing agricultural or industrial buildings Protecting and re-painting rusted gates and metal railings Re-painting radiators as it can withstand temperatures up to 175C

3 Goo Gone Emulsion Clean Up Cleans up paint spills and splatters. Our Latex (Emulsion) Paint Clean Up formula conveniently clings to vertical surfaces, making it easy to clean spills, splatter, brushes, and more. Works on"wet and dried latex/acrylic/enamel paint, art/craft paint, varnish, shellac, caulk. Perfect for cleaning: baseboards, trim, rugs and tiles.

3 Owatrol Aluminium RA85 High gloss aluminium appearance Excellent penetrating and adhesion properties does not flake or peel Decorative insulating film high temperature resistance up to 175C Excellent abrasion resistance ideal in aggressive climatic conditions Greatly prolongs the life of the treated surface Properties Anti corrosive high gloss aluminium finish. High reflecting film light and heat Excellent penetrating and adhesion properties due to the binding properties of Owatrol Oil Does not peel or flake. Rejuvenates rusted surfaces. Ideal for aggressive climatic conditions. Withstands chemical attacks. Easy application. Protects against corrosion. Excellent film-forming qualities (adhesion, flexibility, even film). High temperature resistance up to +175 C. Where to use Exterior: gates, fences, structural steelwork, fire escapes, truck & trailer wheels, boat trailers, milking parlour pens, roofing, cisterns, storage tanks, trailers, exhaust, pipes, classic and vintage car or machinery underbodies, in fact, anywhere you want an beautiful silvery finish that will not peel or flake. Interior: machinery, pumps, electrical, plumbing. Horizontal and vertical surfaces Recommendations before application Shake or stir paint thoroughly before and during use. Surfaces must be clean, dry and free from oil, grease and other surface contaminants. On new metal (except aluminium), always apply an application of Owatrol Oil first to avoid any possible reaction between the metal and aluminium paint. Cover / mask everything you do not wish to paint, especially when applying by roller or spray. Do not dilute Application Apply a coat of Owatrol RA85. If two coats are required, allow a minimum of 24 hours between coats. Owatrol RA85 is based on Owatrol Oil, which allows an even shiny film to form while maintaining high flexibility. Clean up Return any unused product to its original container. Clean all tools and equipment with white spirit. Rags soiled with RA85 should be allowed to dry flat or dipped in water before being disposed of.

3 High gloss aluminium appearance Excellent penetrating and adhesion properties does not flake or peel Decorative insulating film high temperature resistance up to 175C Excellent abrasion resistance ideal in aggressive climatic conditions Greatly prolongs the life of the treated surface Properties Anti corrosive high gloss aluminium finish. High reflecting film light and heat Excellent penetrating and adhesion properties due to the binding properties of Owatrol Oil Does not peel or flake. Rejuvenates rusted surfaces. Ideal for aggressive climatic conditions. Withstands chemical attacks. Easy application. Protects against corrosion. Excellent film-forming qualities (adhesion, flexibility, even film). High temperature resistance up to +175 C. Where to use Exterior: gates, fences, structural steelwork, fire escapes, truck & trailer wheels, boat trailers, milking parlour pens, roofing, cisterns, storage tanks, trailers, exhaust, pipes, classic and vintage car or machinery underbodies, in fact, anywhere you want an beautiful silvery finish that will not peel or flake. Interior: machinery, pumps, electrical, plumbing. Horizontal and vertical surfaces Recommendations before application Shake or stir paint thoroughly before and during use. Surfaces must be clean, dry and free from oil, grease and other surface contaminants. On new metal (except aluminium), always apply an application of Owatrol Oil first to avoid any possible reaction between the metal and aluminium paint. Cover / mask everything you do not wish to paint, especially when applying by roller or spray. Do not dilute Application Apply a coat of Owatrol RA85. If two coats are required, allow a minimum of 24 hours between coats. Owatrol RA85 is based on Owatrol Oil, which allows an even shiny film to form while maintaining high flexibility. Clean up Return any unused product to its original container. Clean all tools and equipment with white spirit. Rags soiled with RA85 should be allowed to dry flat or dipped in water before being disposed of.

3 High gloss aluminium appearance Excellent penetrating and adhesion properties does not flake or peel Decorative insulating film high temperature resistance up to 175C Excellent abrasion resistance ideal in aggressive climatic conditions Greatly prolongs the life of the treated surface Properties Anti corrosive high gloss aluminium finish. High reflecting film light and heat Excellent penetrating and adhesion properties due to the binding properties of Owatrol Oil Does not peel or flake. Rejuvenates rusted surfaces. Ideal for aggressive climatic conditions. Withstands chemical attacks. Easy application. Protects against corrosion. Excellent film-forming qualities (adhesion, flexibility, even film). High temperature resistance up to +175 C. Where to use Exterior: gates, fences, structural steelwork, fire escapes, truck & trailer wheels, boat trailers, milking parlour pens, roofing, cisterns, storage tanks, trailers, exhaust, pipes, classic and vintage car or machinery underbodies, in fact, anywhere you want an beautiful silvery finish that will not peel or flake. Interior: machinery, pumps, electrical, plumbing. Horizontal and vertical surfaces Recommendations before application Shake or stir paint thoroughly before and during use. Surfaces must be clean, dry and free from oil, grease and other surface contaminants. On new metal (except aluminium), always apply an application of Owatrol Oil first to avoid any possible reaction between the metal and aluminium paint. Cover / mask everything you do not wish to paint, especially when applying by roller or spray. Do not dilute Application Apply a coat of Owatrol RA85. If two coats are required, allow a minimum of 24 hours between coats. Owatrol RA85 is based on Owatrol Oil, which allows an even shiny film to form while maintaining high flexibility. Clean up Return any unused product to its original container. Clean all tools and equipment with white spirit. Rags soiled with RA85 should be allowed to dry flat or dipped in water before being disposed of.

3 One Of The Most Amazing Products Ever Put In A Can! Mouse or Click on the Photos For More Information On Same. Download FREE eBook That Magic Ingredient - Link below left... Discover Why Owatrol Oil Is Now One Of The Most Talked About And Used Home / Property Maintenance Related Products In The World. Used alone... Owatrol is a powerful rust treatment, drives moisture out of wood, revives various finishes etc. Used as a paint additive... makes any oil based paint or varnish stick to virtually any surface without peeling, eliminates brush and roller marks, speeds painting job, boosts paint hiding power and more. To Download Owatrol Oil Brochure please click link below Owatrol Oil Brochure See customer comments below, refresh the page as too many to fit on this page. Properties: Used As Rust Treatment Without Equal Solves the cause of the problem. Penetrates deep into the smallest micro pores of the metal down to the good steel behind, displaces moisture and air from those rust pores, thereby removing all rust food and stops the rusting action. Minimises work and time spent on preparation of the metal. Eliminates the need for time or labour intensive total rust removal, wire brushing etc. Allows paint to be applied direct to tight rust. Can be added to subsequent coats of oil based metal primer or paint finish for a peel free finish Used alone on rusted surface gives rustic, matt varnish like finish while protecting metal. Used alone, protects a host of household tools, machines, e.g. underside of power mower, farm machinery, construction plant. Used as a Paint Additive Discover how to paint without brush marks and lots more. Makes oil based paints or varnish stick to virtually anything no more peeling paint. For example makes all oil based paints stick tight to galvanised steel, aluminium, zinc, exterior wood, window sills, wall cappings, fascia boards and lots more. Improved paint flow and workability no more brush marks or streaks, perfect finish every time. Improves paint viscosity and allows painting to be carried from sub-zero to arid conditions. Replaces paint damaging thinners; retains high gloss for years, does not dull the paint like white spirit, does not thin or weaken the paint. Does not evaporate from paint compared to white spirit. It increases hiding power of the paint. Less coats required, especially on wide contrast and weak colours such as reds, yellows etc. Used neat, maintains the natural look of wood, metal etc. Used in oil / alkyd paints, increases anti rust properties of the paint Heat resistant up to +175C Wood impregnation Deeply penetrates and seals wood. Great for window sashes exposed to condensation, loose putty, water run-off, fascia boards, doors etc. Protects metal parts. Creeps in behind steel hinges, fittings etc, rust proofs surface mounted hinges and fittings from behind. (great for signs etc) Where to use Ferrous and non-ferrous metals. (may also be applied on wood, plastics, glass,) Lightly to heavily rusted surfaces. Steel roofing cut edges, sheds, machinery, plant etc. May be used with / in any oil based paints, air drying alkyds, lacquers and varnishes, one component urethanes and asphalt / petroleum based paints. May be mixed with oil based stains/paint to improve impregnation of wood and protection of metal surfaces (hinges and fittings) Do NOT mix/use with quick drying, cellulose paints (car paints), chlorinated rubber paints, with two component paints or water based paints (See CIP, EB & Floetrol for related information) Directions for use Ensure surface is clean, dry and free from oil, grease and scale RustFor best results, saturate all areas of rusted first with neat Owatrol Oil. Allow 24 hours to dry. Wipe off ponding on horizontal areas while still wet. (prevents subsequent skinning) Other applications Add 25% (or more for bad surfaces) Owatrol Oil to oil based metal primer, or any oil based top coat. See special How To detailed instructions on rust treatment & peeling paint problems elsewhere on this site. To improve paint flow, and stop brush marks, achieve a better finish, mix 5-10% Owatrol Oil with any oil based paint or varnish Coverage : 18m/l (depends on substrate, porosity etc) Application tools : Brush - Roller - Airless spray Application temperature : 5C to +35C Drying : 12 h. Recoating time : 24 to 48 h. Clean-up : White-Spirit Order a tin of Owatrol Oil now. Several tin sizes available - select via the scroll down arrow above - we Guarantee that you will be delighted with the results.

3 ESP Primer Makes Any Oil Or Water Based Paint Stick To Shiny Smooth Surfaces Without Sanding Or Mess. Mouse or Click on the Photos For More Information On Same. PROPERTIES: Cleans old painted or varnished surfaces and leaves a thin grip film before recoating. Makes oil or water based paints or varnish to stick to any smooth non-porous surface. No tiresome or dusty sanding required. May be painted over any time after 2 hours or up to 7 days later. Easy to use... wipe on with a clean cotton cloth or brush. Will not damage old coatings. Reduces surface preparation time. WHERE TO USE: Lacquers, baked enamels, varnishes, gloss paint, powder coated steel, Ceramics : bathroom or kitchen. Melamine : kitchen cabinet makeover, furniture Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces, RECOMMENDATIONS BEFORE APPLICATION Ensure new finish is compatible with the old finish. Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only) Remove any loose and flaking old finish. For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below. Wipe up ESP before drying. Use clean clothes and change them regularly. Do not contaminate new clean ESP with old used ESP. Do not use ESP for dipping. APPLICATION Apply a liberal application of ESP. Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP. Allow ESP to dry for 2 hours at normal room temperature before applying the finish. Coverage: 18 m/l Application tools : Brush, roller, rag. Application temperature : +5C to +35C Recoating time : 2h to 7 days. Clean-up : Soap + Water ESP is Ireland's biggest selling primer for smooth shiny surfaces since 1998. Order a can of ESP Now.

3 Temporary Drain Pipe is a heavy duty polythene sleeve that prevents water damage to masonry until the drain pipe is installed. It is simply installed by fixing with Cable Ties and can be easily removed prior to installing the permanent drain pipe. Simple installation ideal for both single and multi storey projects. Should be used prior to installation of permanent downpipes. Designed to protect masonry and woodwork from unsightly rainwater staining and water damage during construction.