nanoCUL 868MHz USB Stick Ftdi Cc1101 Fw 1.67 Bend Antenna Fhem Iobroker Ccu / Ccu2 / Ccu3 Cul 868+ Adapter (868mhz)

Condition: New

This is a nanoCUL 868MHz mini USB with FTDI chipset and SMA rod antenna. It is equipped with firmware 1.67 and is ready to use. The range is extremely extended by the 10 cm Eightwood 868MHz Vertical Omni Directional antenna. The gain is 3dBi. The FTDI chipset has a unique serial number, which is necessary if several CULs are to be used.

Great for Home Assistant communications where 868Mhz radio communication is required (for example ATC Run Ray RF radiators)
Features:


MINI-USB Nano V3.0 ATMEGA328P FT232RL FTDI with Active, TX and RX LED.
C1101 868 MHz radio module.
10 cm Eightwood 868 MHz vertical omni directional antenna with 3dBi gain
USB adapter.


Use:


Homematic (no HM IP) & MAX!
FS20
FHT
S300
EM1000
HMS
Hoermann
ESA200
Lacrosse TX2/TX3
RTS.

to CCU 1 - CCU 3.
an raspimatic
an ioBroker MAX CUL
to ioBroker CUL
to asksin-analyzer-xs (with special firmware, we can install this for you before shipping)

Installation FHEM:

definition in fhem.cfg:
define CUL868 CUL /dev/serial/by-id/usb-SHK_NANO_CUL_868-if00-port0@38400 0000


Installation CCU + CCU2 + CCU3:

In CUxD setup:

TTYPARAM=ttyUSB0:38400:8N1
TTYASSIGN=ttyUSB0:CUX
"USB0" may still need to be adapted to the USB port, e.g. "USB1 or USB2"