High-Pressure 130PSI Water Pump - Easy Install, Self-Priming, 6L/Min Flow

Condition: New

Shipping Nationwide 1 to 2 working days
Collection to be arranged
Cash on Delivery COD (Pay on Delivery )

BB622


Description:

Specifications:
Voltage: 12V DC,
Ampere: 6A
Rated power: 70W Pressure: 0.90MPA (maximum 130PSI)
Flow: 6L/MIN (6.0 L/min)
Working medium: no Lubricant, no strong corrosivity, no acid and alkali, no liquid solid particles;
Medium temperature: 0 ℃ - 100 ℃
Size of inlet and outlet: 10mm Size: L 6.23*W 3.93*H 2.36in， L16*W10*6CM
Type: straight thread
Weight: 598g (straight thread), 582 (thread)
:
The diaphragm pump combines the advantages of the self-priming pump and a chemical pump. Installed in a dry and well-ventilated place; The pump cannot work in water|.
It adopts a variety of imported corrosion-resistant materials, self-priming, thermal Safeguard, stable operation, long-term continuous idling, and long-term continuous load operation|.
Fully sealed, high stable pressure
When working, the rubber support can absorb the vibration of the pump.When the water pressure is too high, the pump will Safeguard itself and work normally, and the water Tube will not burst, safe and durable. Pressure Safeguard: pressure switch power supply Safeguard
The maximum flow rate is 6 L/min. The flow rate can be adjusted from 0.1 L/min to 6 L/min. The maximum pressure of 130PSI (9.0kg) can be adjusted from 75PSI (5kg) to 130PSI (9.0kg) according to different needs
Work: intermittent work (continuous work at different times and under different working pressures)
Use medium: water or solvent, PH value 5-8, Lubricant. Service life: more than 500-1000 hours of continuous operation. 10. Pressure switch type features: when the water is turned off, it will automatically cut off the power supply and the motor will stop. After the water is turned on, it will be powered on automatically and the motor will run. 11. The shell is made of ABS plastic. Package includes:
1 diaphragm water pump
Buyer's note: This product will be powered on for water pumping testing before shipment,
Only qualified ones will be arranged for shipment,
If there are slight water droplets inside the water pump after receiving the goods,
It is a normal phenomenon. It is a qualified product