Browse categories

Yongnuo YN-468 II TTL I-TTL Flash Speedlite For Nikon

Yongnuo YN-468 II TTL I-TTL Flash Speedlite For Nikon
€100 Message
  • Visa
  • MasterCard
  • Paypal
  • Cash
1 Available
406 17
1512 more ads from this seller
1 year ago
Ad Views:
Viewing 1 of 4
Yongnuo YN-468 II TTL I-TTL Flash Speedlite For Nikon


Condition: New

This upgraded Flash Speedlite YN-468 is designed for DSLR Camera. It not only has the function of wireless trigger (M), Slave Trigger (S1, S2), but also the function E-TTL. What`s more, it has the LED Display, Multi Strobeflash function, and set focus position of the light head manually or Auto Zoom. It`s more professional and higher efficiency.

It`s very cost-effective, you just need to pay a little money to get the greatest achievement.


YN-468 II for Nikon version is released now.

Here are improved features compare with the old version YN-468

a), New Battery Compartment

The 4 batteries are now all in a row with a latch that flips open. This looks like a much better design now, no more acrobatics required for a battery exchange.

b),Improved Optical Slave Sensor ( Located on the front side of the flash, underneath the red plastic screen )

"S1" mode --- it is used with manual flash or Studio flash.
"S2" mode --- it is designed for digital TTL flash. The special thing about this mode is the ability for detect the ingnore the tiny pre-flashes sent out by digital TTL systems before the shutter actually opens.
The range is a little longer and the sensitivity is better than the 1st generation.

c),Improved (Laser) AF Assist Light

With the much improved AF assist light of YN-468 II, it can help the camera find focus in darkness, and there's a bright red pattern projected now which helps much better with low-contrast subjects althoug it's still limited to the center AF field.
Our engineers also moved away from a simple LED but use a laser-based system which explains the clearness of the pattern, as well as the high range of the beam.

d), PC Sync Port
We built a PC sync port in the side of the YN-468 II, you can not only trigger the flash through the flash foot, or with the optical slave modes, but aslo through a PC Sync Cable.

e), Improved Buttons Design
It is sensitivity and better feeling to control.

And here are some other features:

1), TTL mode
The metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode.
In this iTTL mode, you can also make compensation of flash brightness with the " Output contral knob" within the range of ±3 ev, with the precision of 1/3 ev. ( Only with this feature the camera-flash combination can give you correctly exposed flash photographs automatically.)

2), Auto Zoom

The flash speedlite will move forward and backward with the changes of lens focus to suit different illumintion zones when it is mounted on the camera which supports iTTL Function, the zoom range is 24mm - 85mm.
You also can set the focus position for the light head manually by pressing the mode swithc button + Power button.

3), Multi Mode

It's the strobeflash mode, the flash light will output the power, flash frequency and time flash you have set.

4), M mode
You can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator. When taking photos, you only require setting the flash luminance, adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal.

5), S1 Mode
It will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave. ( When you use this mode, your master flash should be set at manaul flash, the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.)

6), S2 Mode
It is very similar to S1 mode, but it can support the master flash in TTL mode. In particular, if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode.

Advanced Application:
a), Multi-Lamp Lighting Application
b), Exposure Bracketing ( FEB)
c), Use Wide-angle Diffuser
d), Rear-curtain Sync
e), FV Lock ( This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manaul)
f), Application of AF LED
g), Exposure Compensation
h), Feflection Flash
i), Use Reflection Board to take photos

Guide Number

Flash Mode
TTL / M / Multi / S1 / S2

Circuit design
Insulated Gate Bipolar Transistor (IGBT)

Zoom Range
24mm, 35mm, 50mm, 70mm, 85mm

Vertical rotation angle
-7~90 degree

Horizontal rotation angle
0~270 degree

4 X AA size Batteries ( Alkaline or Ni-MH are usable)

Lighting times
100 - 1500 times (with AA alkaline batteries)

Recycle Time
approx 5s ( AA alkaline cell used)

Color Temperature

Flash Duration
1/800S - 1/20000S

Flash Control
TTL auto flash or manual level 8 light quantity output contral with 0.3 stop increment

72 x 135 x 85mm

Net Weight 250g

Suitable for:
Nikon D500, D300, D300S, D7000, D90, D80, D5100, D5000, D3100, D3000, D60, D40X, D40

(Not suitable for Nikon fullframe D4, D3, D2 series, D800E, D800, D700, because it may have Vignetting at the corners)

Package Include:
1 x YN-468 II Flash Speedlite with Metal Hot Shoe
1 x Mini Stand
1 x Flash Diffuser cover
1 x Manual in English and Chinese

Shipping: Collection: FreeIreland: €6.50Europe: €16Rest of world: €24
Payment: PaypalCashCard
From sellers around the web:
Yongnuo YN-468 II TTL I-TTL Flash Speedlite For Nikon

Yongnuo YN-468 II TTL I-TTL Flash Speedlite For Nikon

€100.00 Message
1 Available
  • Visa
  • MasterCard
  • Paypal
  • Cash

Ask question to seller

You must be logged in to contact the advertiser. Please click here to login.

See more in our Camera Accessories category available today