20 Liters Owatrol Textrol Clear Non-Peel, Clear, Deep Penetrating Oil Finish For Exterior Woods

Non-Peel, Clear, Deep Penetrating Oil Finish For Exterior Woods

Note: It is difficult to interpret or explain the 'colour clear' as it will vary depending on the wood type you have.

The best guide / indication is to place some water on your wood and that will give you a good indication of how Textrol Clear will look on Your wood. (See Textrol Golden Oak and Rustic Oak, Weather Grey, Graphite Grey also)

Penetrating oil finish / decking oil for weathered wood which protects against moisture and UV damage

Developed for weathered wood
Penetrates and protects from within the wood
Properties

Use on horizontal and vertical surfaces.
Penetrates and protects from within the wood.
Excellent penetration- Textrol should be in the wood not on the surface.
Non-film forming – will not crack, peel or flake.
Protects against moisture and UV damage.
Quick and easy to apply – “wet on wet” application.
Provides mildew resistance.
Easy maintenance – no stripping or sanding.
Destination

Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak …
Can be applied to both horizontal surfaces (decks, walkways ,…) and vertical surfaces (cladding, shingles, fences…) and other exterior wood structures
Not recommended for new wood - use SEASONITE instead.
Application

Apply an application of Textrol and allow it to penetrate for 15-30 minutes.
Apply a second application and allow it to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Do not allow Textrol to become touch dry or dry between coats (apply “wet on wet”).
Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
The appearance of Textrol gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.
Refer to the packaging for maintenance procedure.

Multicoat coverage : 5 m²/l

Coverage rate for maintenance : 10 to 12 m²/l

Application tools : stiff bristle - brush - airless spray

Application temperature : 5°C to +35°C

Working time : 24 to 48 h.
Clean-up : White-Spirit

See customer comments below...

Choose Textrol when you if you want to save yourself hard work, regular repeated applications and of course.. money.