Bona Hard Surface Floor Polish

Condition: New

Bona Hard Surface Floor Polish – High Gloss Protective Polish for Hard Floors

The **Bona Hard Surface Floor Polish** is a professional-quality floor polish designed to restore the shine and appearance of sealed hard-surface floors while providing a durable protective layer against everyday wear. Its advanced urethane acrylic formulation helps fill fine micro-scratches and scuffs, evening out the appearance of tired or dull flooring and leaving behind a smooth, attractive high-gloss finish.

Suitable for a wide range of sealed hard floors, including laminate, vinyl, LVT, linoleum, stone, ceramic tile and other compatible surfaces, Bona Hard Surface Floor Polish is an excellent choice for refreshing floors in homes, offices, retail premises, hospitality environments and other areas where attractive, well-maintained flooring is important.

Whether you're looking to restore a tired-looking floor, improve its visual appearance or provide an additional layer of protection against everyday traffic, Bona Hard Surface Floor Polish offers a convenient and professional solution.

Professional High-Gloss Floor Polish

Floors can gradually lose their original appearance through regular foot traffic, furniture movement, cleaning and general daily use. Even when a floor is thoroughly cleaned, fine scratches and scuffs can leave the surface looking dull and uneven.

Bona Hard Surface Floor Polish is designed specifically to address this problem. Its high-gloss formulation restores shine while helping to create a more uniform appearance across the floor.

The durable protective coating helps refresh worn-looking surfaces and gives compatible hard floors a cleaner, brighter and more polished appearance.

Durable Urethane Acrylic Protection

The polish combines acrylic and polyurethane technology to create a durable protective layer over the existing sealed floor surface. This coating helps protect against everyday wear while reducing the visual impact of minor scratches and scuff marks.

The protective layer can help extend the refreshed appearance of the floor between maintenance treatments, making it particularly useful in areas that experience regular foot traffic.

For commercial premises, this added protection can be especially useful in areas where floors need to maintain a professional appearance throughout the working day.

Helps Fill Micro-Scratches

One of the key benefits of Bona Hard Surface Floor Polish is its ability to fill micro-scratches and help even out the appearance of the floor.

Fine scratches and scuffs can make an otherwise clean floor appear worn. Applying the polish creates a smoother-looking surface that helps minimise the visual effect of these small imperfections.

The result is a more consistent appearance with a renewed high-gloss finish.

Suitable for a Wide Range of Hard Floors

Bona Hard Surface Floor Polish is formulated for use on a variety of sealed hard flooring materials.

Suitable applications include:

* Laminate flooring
* Vinyl flooring
* Luxury vinyl tile (LVT)
* Linoleum
* Ceramic tiles
* Quarry tiles
* Stone flooring
* Terrazzo
* Sealed porous marble
* Other compatible sealed hard surfaces

This versatility makes it a useful product for both domestic and professional floor maintenance.

Always check that the existing floor finish is compatible and carry out a small test area before treating the complete floor.

Ideal for Residential and Commercial Environments

Bona Hard Surface Floor Polish can be used in a variety of indoor environments where sealed hard flooring requires regular maintenance.

It is suitable for:

* Homes
* Apartments
* Offices
* Retail stores
* Hotels
* Restaurants
* Cafés
* Reception areas
* Showrooms
* Schools
* Community buildings
* Commercial premises

Its combination of attractive appearance and protective performance makes it particularly useful wherever flooring needs to look clean, polished and professionally maintained.

High-Gloss Finish

If you want a floor with a noticeable shine, Bona Hard Surface Floor Polish provides a high-gloss finish designed to bring light and brightness back to dull-looking surfaces.

The polished appearance can transform tired floors without the need for replacement, making it an economical way to refresh compatible flooring.

The high-gloss finish is particularly effective in formal areas, reception spaces, showrooms and commercial environments where presentation is important.

Excellent Coverage

Bona Hard Surface Floor Polish offers an approximate coverage rate of **50m² per litre**, allowing one litre of product to cover a substantial floor area when applied according to the manufacturer's recommendations.

Actual coverage can vary depending on the porosity, texture, condition and preparation of the floor, as well as the application method used.

Fast Drying

The polish has been formulated to dry relatively quickly, helping minimise disruption during floor maintenance.

Under recommended conditions, the product is touch dry in approximately **30–60 minutes**, with a minimum recoating time of approximately **2 hours**.

Always allow the appropriate drying time before applying additional coats or returning the floor to normal use.

Simple Application

Bona Hard Surface Floor Polish is straightforward to apply when the correct preparation and application procedure is followed.

Before polishing, the floor should be thoroughly cleaned and allowed to dry completely. Existing polish or heavy build-up should be removed where necessary to provide a suitable surface for the new treatment.

For application:

1. Thoroughly clean the floor and remove dirt, grease and residue.
2. Ensure the surface is completely dry.
3. Check the floor for compatibility and test a small inconspicuous area.
4. Apply Bona Hard Surface Floor Polish using a suitable Bona Microfiber Applicator Pad.
5. Spread the polish evenly across the surface.
6. Avoid excessive application or puddling.
7. Allow the coat to dry fully.
8. Apply an additional coat where required, allowing at least two hours between coats.

The manufacturer's technical information specifies that the product should **not be diluted**.

Designed for Easy Maintenance

Once applied, the polished floor can be maintained using a suitable hard-surface floor cleaning system. Regular cleaning helps remove everyday dust, dirt and grime while preserving the appearance of the protective polish.

For best results, use a compatible Bona hard-surface floor cleaner as part of a regular maintenance routine. Bona recommends polishing at intervals according to traffic levels, with more frequently used floors generally requiring more regular maintenance.

Not a Floor Cleaner

It is important to understand that Bona Hard Surface Floor Polish is a **floor polish rather than a cleaning product**. The floor should be thoroughly cleaned before application so that dirt and residue are not sealed beneath the protective coating.

Preparing the surface correctly is one of the most important steps in achieving a smooth, attractive and long-lasting result.

Suitable for Professional Floor Care

Bona Hard Surface Floor Polish is an excellent addition to professional cleaning and floor maintenance equipment. Its combination of high-gloss appearance, protective performance and broad surface compatibility makes it suitable for contractors, cleaning companies, facilities managers and property maintenance teams.

It can be particularly useful when a floor needs to be refreshed quickly without undertaking a complete flooring replacement or major restoration project.

Key Features

* Professional-quality hard-surface floor polish
* High-gloss finish
* Durable urethane acrylic formulation
* Helps protect against everyday wear
* Helps fill micro-scratches and scuffs
* Restores shine to dull-looking floors
* Suitable for laminate and LVT
* Suitable for vinyl and linoleum
* Suitable for stone and ceramic tile
* Suitable for compatible sealed hard surfaces
* Approximate coverage of 50m² per litre
* Touch dry in approximately 30–60 minutes
* Minimum 2-hour recoating time
* Ready to use – do not dilute
* Designed for use with a Bona Microfiber Applicator Pad
* GREENGUARD certified
* Suitable for residential and commercial applications

Important Usage Information

Bona Hard Surface Floor Polish should only be used on suitable, sealed hard flooring surfaces. It is **not intended for waxed or oiled floors**, and the surface should always be tested before full application to confirm adhesion and the desired appearance.

For previously polished floors, any significant build-up should be removed using an appropriate Bona polish remover before applying a fresh coat. This helps ensure the new polish bonds correctly and provides a consistent finish.

Why Choose Bona Hard Surface Floor Polish?

The **Bona Hard Surface Floor Polish** provides an effective way to revive tired-looking sealed hard floors while adding a durable protective layer. Its urethane acrylic formulation helps fill micro-scratches, reduce the appearance of scuffs and restore a striking high-gloss finish.

With its broad range of suitable applications, fast drying characteristics and excellent coverage, it is a practical choice for both professional cleaners and homeowners. Whether you're refreshing laminate flooring in a home, restoring shine to LVT in a commercial property or maintaining hard flooring in a busy workplace, Bona Hard Surface Floor Polish delivers an attractive and protective finish designed to keep compatible floors looking their best for longer.