Outdoor flash lamp Jinbei Orlit Westcott Rovelight HD 400 Pro with 14 cm Reflector

Condition: New

Jinbei HD 400 Pro is a compact, outdoor lamp working in TTL and HSS modes with a 400Ws power output. Charging time up to full power is maximum 0.9 seconds while maintaining the color temperature 5500 K +/- 150K. The source of modeling light is an energy-saving LED matrix with the power of 20W working in proportional or independent modes (regulation of light intensity with the help of the setting wheel). The flash tube is protected by a durable, HEIMANN glass cover. There was also space for the lamp-triggering mode dedicated to strobes using the Canon-RT wireless communication system. In addition, the HD 400 Pro also has features taken from the top model - HD 610:

Easy Cap mode for create cut out mask (this function needs at least 2 lamps with Easy Cap function)

- Delay mode, allows to delay flash up to 30s
- Pulsing HSS Mode allowing shutter speeds to 1/8000
- Short Flash Duration (Freeze Mode) down to 1/19000s
- The standard for this class of lamps is the built-in receiver of the triggers Jinbei (TRS-V, TR-A9, TR-V6, TR-A6II, TR-Q6, TR-Q7 and TR-611/612) which allows free work in the studio and outdoors using remote control the power of flash or change of work modes.

This compact flash is distinguished by a new, redesigned design. The display is located on the side of the lamp - the menu diagram is taken from the new line of HD and MSN lamps, which allows for intuitive operation in the Jinbei ecosystem. The new 14.8V polymer-ion battery with a capacity of 4400mAh is located on the back of the device and is easy to dismantle and assemble. The level of charge is indicated by four diodes visible on it. A fully charged battery allows you to make up to 400 flashes at full power. There is also the USB-C software upgrade slot, which is located on the back of the lamp next to the battery assembly guides. The latest software for the lamp can be found here: http://www.goldenshell.com.cn/en/Home/Download/upgrade.html

Box with the lamp includes also a 14 cm diameter reflector with a magnetic adapter for the assembly of colored filters; five gel filters (yellow, diffusive, blue, green and red); charger with 16.8V battery and handy chest.

Jinbei HD 400 Pro Features:
- 400Ws (GN 66 – ISO 100, standard reflector)
- Fan Cooled (Auto)
- Eco 20W LED modelling light
- Bowens S-type accessory mount
- Built in, removable 14.8V / 4400mAh polymer-ion battery
- Over 450 full power flashes per battery charge
- 0.05 – 0.9 s recycle time
- Flash modes – TTL / M
- HSS to 1/8000s
- Flash output range – 1/256 – 1/1
- Short flash duration (freeze mode) – 1/800s – 1/19000s
- Easy Cap mode for create cut out mask
- Delay mode, allows to delay flash up to 30s
- Jinbei 2.4GHz radio receiver Built-in
- 16 channels
- Large colour dot matrix LCD display
- Sound prompt
- USB-C port for firmware upgrades
- 3.5mm sync port

The kit includes:
HD 400 lamp
- battery
- mains battery charger
- case
- shoulder strap
- 14 cm diameter reflector with a magnetic filter adapter
- 5 colour filters
- warranty card