3 HIGH PRECISION MEASUREMENT- This laser level system includes laser level, tripod and staff, which provides high precision measurement and 500m working range. Our laser level is suitable for indoor and outdoor use, perfect for marking, performing precise work on frames and trusses, carpentry, shelves, etc. 360 DEGREE & 500M SCAN- The outdoor laser level provides 360 degree scanning with clear, bright and stable lines. Used with the laser detector, the measurement range of the rotary laser level will reach 500m in diameter. It also comes with laser goggles to easily see the laser in strong sunlight. AUTOMATIC LEVELING & ALIGNMENT- The rotary laser level is self-controlled to align and adjust the line within the self-leveling range of 5 degrees. With the most advanced positioning system, it makes your works more efficient and precise. ADJUSTABLE & STABLE TRIPOD- The height of the contractor tripod can be adjusted by three locking screws, which reaches 5.41ft/1.65m when all three legs are fully extended. Three fixed-point feet can be easily inserted into the ground to keep the equipment stable during operation. STURDY LEVELING STAFF- With five telescopic sections, our telescopic staff provides enough length up to 16.4ft/5m to meet your different measurement needs. The staff is designed with a double-sided scale in metric system and stored in a sturdy carrying bag. Package Content 1 x Rotary Laser 1 x Tripod 1 x Staff 1 x Carrying Case 1 x Pair of Glasses 1 x Laser Detector 1 x Laser Target 1 x Remote Control 1 x Charger 2 x Keys 1 x Packet

3 Easy-to-assemble device for lifting panels A mounting aid for interior work and drywall constructions Lifts sheet rocks, gypsum plaster boards, particle boards and metal and wooden panels up to a weight of 68 kg The two load arms can be extended to up to 290 cm and are 90 cm wide The drywall lift can be easily assembled and is perfectly suitable as a mounting aid for interior design and drywall constructions. It lifts sheetrock's, gypsum plaster boards, particle boards, metal and wooden panels, ceiling plates up to 68 kg for over-head assembly or pitched ceiling and wall mounting . The two load arms are extendable up to 290 cm and have a width/length of 90 cm. They are equipped with retainable hooks. This practicle assembly aid for ceilings can be used for plasterboard drywall constructions and their removal as holding support. The drywall lifter can be completely disassembled and is delivered partially assembled. The lift is ideal for interior work Precise installation of drywall and particle boards For metal /MDF / wood paneling or sheetrock on the walls and the ceiling The paneling lift has a stable tripod base The assembly aid reaches up to 595 cm for walls (465 cm + lift half the length of the board) The lift has a simple and easy 1-gear winch and a brake The paneling lift has a tilting board holder for sloping ceilings and walls The XXL board lift can be lowered to a loading height of 86.4 cm above the ground The board lift can be stored compactly and is quickly assembled The board lift is absolutely maintenance-free and a durable mounting aid Working width extendable up to 2.90 m Lift height from 1.40 up to 3.50 m Inclination angle of 60

3 DURABLE CONSTRUCTION- The pipe jack stand is constructed of premium steel, resistant to rusk and corrosion. Height is adjustable(from 71cm/28in to 131cm/51.5in) to meet different needs. HEAVY DUTY V-HEAD- V-head with 2-ball transfer, easy to install. Lock washer ensures safety and large capacity. Lifting weight can be up to 1300lbs. PORTABLE & COMPACT DESIGN- The whole stands is folding. Storage wont take your much space. A portable handle wrapped by rubber is also a highlight. Easy carrying and storage. GREAT STABILITY- The rounded foot pads of this stand is widened. The strut tension plate for superior lateral support. Stability is enhanced when you are working in the uneven place. WIDE APPLICATION- Welding of heavy pipes, shapes, solids and rounds. Support pipe during pipe threading, pipe hole cutting, roll grooving, etc. Specifications Material: Steel Type: 1107A 2-Ball Transfer Capacity: 1300 lbs Height: 71 cm / 28 in to 131 cm / 51.5 in Package Content 1 x Pipe Jack Stand With Ball-transfer Head

3 Detailed Info Description Shipping Nationwide Delivery takes 2 to 5 working days Description : DURABLE ALUMINUM PROFILES - UPGRADED THREE AXES - Three refined axes are designed to achieve plane engraving. With the knob, the axes can be moved manually, which facilitates the carving tool settings. The driving units consist of T8 stainless steel screw rods whose lead distance is 4 mm. It uses double copper nuts to clear round trip errors. GRBL & OFFLINE CONTROL - The GRBL control features an XYZ axis drive and full functionality. And the advantages of the offline controller lies in the following ones: 1. No need to connect to the computer; 2. Arbitrary selection of offline files for engraving. 3. HIGH-SPEED MOTORS - u. And the engraver supports Windows XP SP3, win7, win8, win10 (32/64), macOS system, and other software to directly import JPG, BMP, PNG, DXF format files for engraving. EFFORTLESS OPERATION - For your convenience, we provide a detailed user manual, assembly instructions, and installation video. Assemble the engraver machine according to the installation instructions; then, you can enjoy the delight of engraving plastics, soft aluminum, acrylics, PVCs, PCBs, and many more. Specifications Model: VG-S3018 Pro MAX Effective Working Area(X x Y x Z): 11.8" x 7.1" x 1.8" / 300 x 180 x 45 mm Materials: Aluminum Profile & Bakelite Control Software: GRBL Control Input Power: DC 24V 5A Spindle Speed: 10000 rpm Stepping Motor: Size 42, 12V; Torque: 0.25 N/m Driving Units: T8 Stainless Steel Screws Cutter Diameter: 0.125" / 3.175 mm Positioning Accuracy: 0.003"-0.004" / 0.08-0.1 mm Item Dimension: 15.7" x 11.8" x 9.4" / 400 x 300 x 240 mm Package Content 1 x 3018 CNC Router Kit 1 x 2500mw Laser Module 1 x Spindle 1 x U-Disk (Software & Instruction) 1 x Set of Milling Cutter 1 x Pair of Protective Glasses 1 x USB Cable 1 x Power Supply 1 x Set of Tools 1 x Brush 1 x Manual sd2

3 Description Shipping Nationwide Delivery takes 2 to 5 working days Description SPECIFIC PARAMETERS- Working Area: 600x400x75 mm (11.8"x15.7"x2.9"). Worktable dimension: 750 mm*480 mm*15 mm. Spindle Speed: 0 ~ 24000rpm/Min, Note: total power: 1000W, spindle motor: 800W. DURABLE QUALITY- Equipped with an aluminum backing plate, this CNC machine is more steady and solid. The chrome shafts are not easy to deform, designed aluminum dust-proof plate for easy cleaning, and suitable for long time use. STRONG COMPATIBILITY- Can be controlled by computer for more precise engraving control. Replace the traditional parallel Interface with USB, suitable for desktop and laptop computers. And compatible with more operating systems(WINDOWS 2000 / XP, WIN7, WIN8, WIN10). HIGH TORQUE TRANSMISSION- Flexible coupling can be used for high torque transmission. Cover plates greatly reduce the pollution for the screws and shafts. Spindle motor knob can be useful for small positioning adjustment, providing precise engraving. MULTIPLE APPLICATION- Engraving Machine is perfect for the engraving of soft materials such as plastic, wood, acrylic, PVC, PCB, MDF board, advertising signs, etc. Specifications Total power: 1000W Spindle motor: 800W Effective Working Travel395(X)Mm*600(Y)Mm*70(Z)Mm (15.6"*23.6"*2.8") Shape Dimension840*640*460mm (33.1"*25.2"*18.1") Max.Workpiece Dimension750mm*480mm75mm (29.5"*18.9"2.9") Frame Materials6061 Aluminum Alloy + 6063 Industrial Aluminum Driving Units X/Y/Z Axis: 1605 Ball Screws Spindle Speed: 0 ~ 24000rpm/Min (Frequency Converter Speed Regulation) Repeat Accuracy: 0.03mm (0.001") Carving Speed:0-2000mm/Min (Different Materials Differ) Machine Weight: 59kg (130.1 lbs) Package Content 1 x 3 Axis CNC 6040 Engraving Milling Machine 1 x USB Cable 1 x USB Disk 1 x A Set Of Installation Tools 1 x Cutting tool 1 x Z Axis Automatic Setting Tool 1 x 4th Axis sd2

3 Quickly found again: How do you store the utensils you need after a barbecue party or camping? Just leave them lying around in the garage? No! Store them neatly on our storage shelves so you can find everything quickly You can rely on it: where do you want to store heavy tools? Leave them to a professional - this heavy duty shelving set! Reinforced steel frame, additional crossbars, anti-tippers - each shelf can support weights up to 175 kg A chance for everyone: car tyres, tool boxes or large cleaning buckets - whether large or small items, they all fit on these shelves! The height of the shelves can be easily adjusted. You can also split one of these shelves into 2 small ones Save valuable time: Assembly is child's play - you don't even have to tighten any screws. Easy-to-understand instructions also help with assembly. Complete the assembly in record time and then get on with more important things Garage, basement, workshop: These 2 shelves will fit perfectly in your garage, workshop, basement or shop. Just put them where you need extra storage! Dimension is 180x90x40 cm; Weight is 25 kilograms 2Pcs SKU 0014

3 WET/DRY DRILLING- The core drill machine is designed for both wet and dry drilling. Its max drilling diameter is 4 inches / 110 mm. With a powerful pure-copper motor, the machine's rated power can reach 1880W, suitable for various working conditions of hole drilling. EXCELLENT PROTECTION- By the mechanical clutch design, the coring drill bit will be automatically embedded in the hard object and will not rebound. It has both overload protection and an upgraded cooling system for avoiding burn-in and prolonging the service lifespan. EASY TO USE- Press the speed button, adjust the speed steplessly and press the lock switch, then the speed will be fixed, so you don't need to press the handle on the speed button all the time. The integrated 1/4-inch water valve also features a quick and easy connection. USER-FRIENDLY DESIGN- The shoulder rest makes the concrete drill machine less laborsome and helps you find stress points and buffer. By doing so, the fatigue caused by long-term use would be reduced. Moreover, there is a carrying case coming with the machine for better portability. WIDE APPLICATION- Our concrete power drill can be widely used in drilling reinforced concrete, red brick, marble, and other materials in conditions like installing air conditioners, pipes, stair railings, highways, airports, etc. Specifications Rated Power: 1880W Power Supply: 240V Spindle Thread: 1-1/4" UNC Rotation Speed: 1700r/min Max Drilling Diameter: 110 mm Package Dimensions: 520 x 530 x 400 mm / 20" x 12" x 16" Gross Weight: 6 kg / 13.2lbs Package Content 1 X 1880W Rock Core Drill Machine 1 X Portable Plastic Tool Box 1 X Water Hose

3 Shipping Nationwide Delivery takes 2 to 5 working days Description : MAX WEIGHT/HEIGHT: 6600lbs/16- The pneumatic jack capacity: 6600 lbs/3T. And its lifting Height Range: 6.5"-16".It just takes 5 seconds to lift up. Working Temp: -60~ 50 HEAVY DUTY CONSTRUCTION- The pneumatic jack is made of high strength steel, the whole body is sturdy and durable. Larger stressed area, fits on soft and easy-collapsing place. PORTABLE HANDLE- There is an handle equipped in this air bag jack, which could make the jack easy to move and use for you. EASY TO USE- Powerful and very fast to use. The triple bag jack is the easiest and fastest way to make the car lifted. It inflates with compressed air. WIDE APPLICATION- Suitable for soft and easy to collapse terrain, water on sand or muddy roads. Family using car, minivan, SUV off-road vehicle. Specifications Capacity: 3 Ton Working Pressure: 145Psi/10Bar/1.0Mpa Min. Height:165mm/6.5'' Max. Height: 400mm/16'' Air Inlet :G1/4 Lifting Time: 5 Sec Working Temp.: -60~ 50 Package Content 1 x Pneumatic Jack 1 x Wrench sd2

3 2 - 4 working days SOLID BLADES DESIGN- The lathe chisels are made from high speed steel(HSS), featuring shrill edge and fine grinding. Our entire shank has been heat treated, it can be used after grinding.This knife is an arc shape milled with a 10mm round bar CNC milling machine. 8 PCS CHISELS SET- Chisels range in overall length is about 16.14" (41cm). The lathe tools includes 8 essential chisels: 3 x Gauge Chisel, 2 x Skew Chisel, 1 x Round Nose Scraper, 1 x Standard Parting and 1 x Diamond Parting. One extra 5/8" chisel for you. Blades is about about 6.89" (17.5cm) in length. SECURE BRASS FERRULES- High speed steel(HSS) blades are tightly connected to the handle by durable brass ferrules, easuring chisels' security and reliability while working. RELIABLE & STURDY- Solid wood material handles(Red eucalyptus). Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06"(23cm) long. ATTRACTIVE WOOD TOOL BOX- A wooden case for easy storage and transportation. Foam bases to keep wood chisel sets from any damage. Box Size(LxWxH): 17.72" x 12.20" x 1.57" / 45 x 31 Specifications Blade Material: High Speed Steel(HSS) Handle Material: Red Eucalyptus Blade Processing: Heat Treated Blade Length: about 6.89" (17.5cm) Handle Length: 9.06"(23cm) Chrisle Length: 16.14" (41cm) Box Size(LxWxH): 17.72" x 12.20" x 1.57" / 45 x 31 x 4 cm Featured Refinements:Lathe Chisel Original/Reproduction: Vintage Original 3 x Gauge Chisel 2 x Skew Chisel 1 x Round Nose Scraper 1 x Standard Parting 1 x Diamond Parting 1 x Free 5/8" Chisel

3 Brand New This tool drawer is the tools organizer, enable you be the master of your tools. It has 30 kg capacity with drawer and steel handles to close and clip on the side Safety lock and wheels for easy movement of the trolley Made from Alloy Steel The dimension is 59.8D x 37.7W x 37.7H centimeters SKU 009

3 This heater can be applied for heating the cab of the freight vehicles, vans, storage battery cars and all kinds of other vehicles. -Can preheat the coolant of the engine to avoid wear and tear of engine that started at low temperature; -Can eliminate the window frost; -Environmentally product, low emissions, low fuel consumption; heater exhaust emissions to meet euro IV engine emissions requirements. -Compact structure, easy to install; -Can dismantle to a new car when replace vehicle. -Volatile technology, by the ceramic ignition plug will fuel heating evaporated into gas, fast ignition, full combustion. -The use of advanced automatic control technology, with a reliable abnormal operating conditions. -Fuel, electricity, temperature can be set arbitrarily . -Can use diesel as fuel. Heating Power 5KW SKU 009

3 New in Box Delivery- 2 to 4 working days Easy-to-assemble device for lifting panels A mounting aid for interior work and drywall constructions Lifts sheet rocks, gypsum plaster boards, particle boards and metal and wooden panels up to a weight of 68 kg The two load arms can be extended to up to 290 cm and are 90 cm wide Tilt function - perfect for all angles. 10 cm swivel castors with brakes. Item dimension is 130 x 80 x 20 cm Item weight is 38 Kg

3 MAX WEIGHT/HEIGHT: 6600lbs/16- The pneumatic jack capacity: 6600 lbs/3T. And its lifting Height Range: 6.5"-16".It just takes 5 seconds to lift up. Working Temp: -60~ 50 HEAVY DUTY CONSTRUCTION- The pneumatic jack is made of high strength steel, the whole body is sturdy and durable. Larger stressed area, fits on soft and easy-collapsing place. PORTABLE HANDLE- There is an handle equipped in this air bag jack, which could make the jack easy to move and use for you. EASY TO USE- Powerful and very fast to use. The triple bag jack is the easiest and fastest way to make the car lifted. It inflates with compressed air. WIDE APPLICATION- Suitable for soft and easy to collapse terrain, water on sand or muddy roads. Family using car, minivan, SUV off-road vehicle. Specifications Capacity: 3.0Ton Working Pressure: 145Psi/10Bar/1.0Mpa Min. Height:165mm/6.5'' Max. Height: 400mm/16'' Air Inlet :G1/4 Lifting Time: 5 Sec Working Temp.: -60~ 50 Package Content 1 x Pneumatic Jack 1 x Wrench

3 Delivery takes 2 to 5 working days Description HIGH TEMPERATURE RESISTANCE- This laser tube is made of the boron silicate glass that is also applied on the solar tubes. It is resistant to high temperature and high pressure. TEMOO MODE- The co2 laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode. SPECIAL COATING TECHNOLOGY- The inside of the discharge tube (imported German Schotter tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold. LONGER SERVICE LIFE- Our service life of discharge tubes coated with special catalysts is much improved. Compared with other laser cutting tubes, our 40W co2 laser can last longer. VARIOUS APPLICATION- Professional 40w laser, one of the spare parts of c02 laser engraving machine, widely used in engraving and cutting acrylic, cloth, leather, bamboo, wood and other materials. Specifications Power output: 40W Length: 700 mm Beam diameter: 2.5 mm Wavelength: 10.64 microns Material: Boron Silicate Glass Outer diameter: 50 mm Trigger voltage: 20KV Working voltage: 16KV Optimal operating current: 10-13mA Gross Weight: 5.13kg(11.30lbs) Package Size: 90 x 20 x 16cm/35.43 x 7.87 x 6.29inch Package Content 1 x Laser Tube sd2

3 Description Shipping Nationwide Delivery takes 2 to 5 working days Description : HIGH QUALITY MATERIAL- Constructed from high quality aluminum and galvanized steel, these new brackets are easier to adjust and durable for long lasting using. EFFICIENT WORKING TOOL- This tool has a parallel bar that can have it's distance adjusted from the chainsaw bar to provide different thickness slabs. Mill slabs between 1/2" to 13" thick. ADJUSTABLE CHAINSAW MILL- Chain saw mill is suitable for chainsaws with a bar length between 18" and 48", planking milling height & width are adjustable. EASY TO ASSEMBLE- All necessary assembly and installation hardware are including for easy installation. WIDE APPLICATION- Using together with chainsaw to convert rough logs into beautiful slabs. Ideal for homeowners, woodworkers, & carpenters, you can mill your own lumber at home or in the woods. Specifications Material: Aluminum & Steel Bar size suit: 48''/121cm Capable size range: 18'' to 48'' Cut thickness: 1/2" to 13"(12.7 mm to 330 mm) Net weight: 18 lbs/8.2 kg Maximum slabbing width: 1100 mm (43.3") Package Content 1 x Chainsaw Mill 1 x Assembling Tool Set 1 x Pair of Gloves 1 x User Manual sd2

3 Durable Structure & Solid Base: The disc-and-belt sander is made of heavy-duty metal iron. It is durable and can be used for a long time. A strong base with rubberized feet on the disc sander avoids any heavy vibrations when you operate. It provides extra stability. Powerful Motor: This disc belt sander works well with a high-speed pure copper motor. This super-strong motor runs smoothly, and the energy consumption is low. Power: 300W. The whole machine will not produce much noise. Easy Operation & Compact: It is easy and quick for you to change the belt with the quick-release belt tension lever. The deluxe miter gauge makes your work more convenient. Besides, the metal belt sander is designed with two dust outlets. Various Application: This belt and disc sander can satisfy you and work great in grinding metals, wood, acrylic, and other materials. It is widely used in parts factories, building materials factories, etc., perfect for tool polishing. Specifications Power: 300 W Power Supply: 230V / 50Hz Belt Size: 1 x 29.9 inch/25.4 x 760 mm Disc Size: 5 inch/127 mm Belt Table Size: 5.1 x 5.1 inch/130 x 130 mm Disc Table Size: 7 x 5 inch/178 x 126 mm Table Tilting Range: 0-45 Belt Speed: 13.5 m/s Disc Speed: 2950 rpm Dust Extraction Port O/D: 1.8 inch/45 mm 5 Package Content 1 x 300w Electric Belt Disc Sander

3 Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 6.3"/ 160 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60~ 50 . Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted. Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere. Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air; when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process. Adjustable Handle: This airbag jack has an adjustable handle, which can be adjusted to three different positions to make the jack convenient to use. And this handle can be disassembled from the middle, saving space and making it suitable for you to take it outdoors. Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, minivans, SUVs, and off-road vehicles. Specifications Capacity: 5.0 ton / 11000 lbs Min. Height: 160 mm/6.3 inches Max. Height: 400 mm/15.75 inches Air Inlet: G1/4 Color: Blue Lifting Time: 5 Sec Working Temp: -60~ 50 Package Content 1 x Pneumatic Jack

3 New in box Shipping Nationwide Delivery 2 to 5 workings days The pads can only be used dry. This package contains 7 pieces of diamond premium polishing pads for concrete, granite, marble. Box contents: 1 x 50 grit dry polishing pads. 1 x 100 grit dry polishing pads. 1 x 200 grit dry polishing pads. 1 x 400 grit dry polishing pads. 1 x 800 grit dry polishing pads. 1 x 1500 grit dry polishing pads. 1 x 3000 Grit Dry Polishing Pads