3 # Bona Wave 2K Water-Based Floor Lacquer Professional Protection for High-Traffic Wood Floors Protect and enhance wooden flooring with **Bona Wave 2K Water-Based Floor Lacquer**, a professional two-component polyurethane floor finish designed for demanding residential floors and commercial areas with light to moderate traffic. Combining excellent wear resistance with fast drying performance and a low-VOC water-based formulation, Bona Wave 2K provides a reliable protective coating while allowing the natural beauty of the timber to remain visible. Wooden floors are an attractive and durable flooring choice, but they need the right protective finish to cope with everyday use. Foot traffic, furniture, dirt, scuffs and regular cleaning can gradually wear away an unprotected surface. Bona Wave 2K creates a tough protective layer designed to help guard the timber against everyday wear while providing an attractive, professional finish. Available in **Matt and Semi-Gloss**, it offers flexibility over the final appearance, making it suitable for everything from modern residential interiors to commercial spaces. ## Genuine Two-Component Durability Bona Wave 2K is a genuine **two-component water-based polyurethane lacquer**. The lacquer is combined with a dedicated hardener before application, creating a durable coating designed to withstand demanding everyday use. The two-component system provides enhanced wear and chemical resistance compared with standard single-component floor finishes. This makes it particularly suitable for high-traffic residential floors where additional protection is required. It is also appropriate for commercial flooring exposed to light to moderate levels of traffic. Offices, boutiques, restaurants, reception areas and other interiors can benefit from the additional durability provided by the 2K formulation. For customers looking for something stronger than a standard residential floor lacquer but who do not require the extreme performance of a specialist heavy-duty commercial lacquer, Bona Wave 2K offers an excellent middle ground. ## Excellent Scratch and Scuff Resistance Everyday activity can quickly leave marks on a wooden floor. Shoes, furniture, dirt and general foot traffic can create scratches, black marks and scuffs, particularly in busy areas. Bona Wave 2K is formulated to provide **excellent resistance to scratches and scuffing**, helping maintain the appearance of the finished floor for longer. It is also designed to provide resistance against marks caused by high heels, making it a practical option for busy homes and commercial interiors. A durable protective coating helps reduce the effects of everyday wear and gives the timber an additional layer of protection against the demands of regular use. ## Chemical-Resistant Surface Wooden floors may come into contact with cleaning products, spills and other substances during their lifetime. Bona Wave 2K provides **strong chemical resistance**, helping the finished surface cope with routine cleaning and accidental exposure. This is particularly useful in commercial environments where regular cleaning is essential. Offices, hospitality premises, retail spaces and other busy areas need flooring that can be maintained regularly without quickly losing its attractive appearance. Suitable cleaning products should always be used as part of the maintenance routine, and spills should be cleaned promptly to help preserve the condition of the finished floor. ## Fast Drying Between Coats Bona Wave 2K has been designed to dry quickly, with approximately **23 hours drying time between coats** under normal conditions. Fast drying is a major advantage when completing floor renovation projects, particularly in occupied homes and commercial premises. Shorter intervals between coats can help flooring professionals complete projects efficiently and reduce disruption. Actual drying times can vary depending on temperature, humidity, ventilation, application thickness and other site conditions, so the recommended application conditions should always be followed. Once the appropriate drying period has passed, the floor can be prepared for the next stage of the finishing system. ## Low VOC Water-Based Formula Bona Wave 2K is a **water-based floor lacquer with very low VOC content**, making it a modern choice for interior flooring projects. Its waterborne formulation provides a professional protective finish without relying on the high levels of solvent associated with many traditional floor coatings. The product has an exceptionally low VOC content of less than 4%, making it particularly suitable for indoor environments where reducing emissions is important. It also carries an EMICODE certification for very low emissions, making it a useful option for projects where indoor air quality is an important consideration. Appropriate ventilation should still be provided during application and drying. ## Non-Yellowing Protection One of the benefits of a modern water-based lacquer is its ability to preserve the natural appearance of the timber. Bona Wave 2K provides a **clear, non-yellowing finish**, helping the wood retain its original colour rather than developing a strong amber appearance. This makes it especially suitable for light-coloured timbers, including pale oak and other naturally light wood species. The clear finish allows the grain and character of the timber to remain visible while providing a protective coating over the surface. For customers who want a natural-looking wooden floor rather than a heavily varnished appearance, Bona Wave 2K is an excellent option. ## Matt and Semi-Gloss Finishes Bona Wave 2K is available in different sheen levels, allowing you to choose the appearance that best suits the flooring and surrounding interior. The **Matt finish** has a subtle appearance with low light reflection, making it ideal for contemporary interiors and customers who want the timber to look as natural as possible. The **Semi-Gloss finish** provides a higher level of sheen, creating a brighter and slightly more polished appearance while still retaining the natural character of the wood. The choice of finish allows the same high-performance lacquer system to be used across a variety of interior design styles. ## High-Build Performance Bona Wave 2K has excellent **high-build characteristics**, helping create a strong protective layer over the timber. A high-build coating can be particularly beneficial when refinishing wooden floors that require a durable surface capable of handling regular use. The final appearance and performance depend on proper preparation and application. The timber should be correctly sanded, clean and free from dust, grease, wax and other contaminants before applying the finishing system. Following the recommended application process is essential for achieving the best possible result. ## Suitable for Hardwood and Engineered Floors Bona Wave 2K is suitable for a wide variety of interior wooden surfaces. It can be used on **hardwood and engineered wood flooring**, making it a versatile choice for different flooring projects. It can also be used with suitable wood stains and primers, giving flooring professionals flexibility when creating a particular colour or finish. The lacquer is compatible with both oil-based and water-based wood stains and can be incorporated into a complete Bona floor finishing system. This makes it suitable for new installations, floor renovations and restoration projects. ## Ideal for Residential and Commercial Applications Bona Wave 2K has been developed for **heavy-duty residential use and light to moderate commercial traffic**. In homes, it can be used in busy hallways, kitchens, living rooms, dining areas and other spaces that experience regular foot traffic. Commercial applications can include offices, shops, restaurants, hotel areas and other interiors where a durable but cost-effective floor lacquer is required. Its combination of performance, attractive appearance and relatively quick drying makes it particularly appealing for flooring projects where both durability and efficiency matter. ## Professional Floor Refinishing Bona Wave 2K is highly regarded as a professional floor refinishing product and is well suited to use by flooring contractors. Before applying the lacquer, the existing floor should be thoroughly sanded and prepared. Any old coatings, dirt, wax, grease and other contamination should be removed to ensure good adhesion. A compatible Bona primer can be applied where required, followed by the recommended coats of Bona Wave 2K. The lacquer should be mixed carefully with the supplied hardener using the manufacturer's recommended mixing ratio. Only the amount that can be used within the product's working time should be prepared. Professional rollers or suitable floor applicators should be used to achieve an even coating. ## Efficient Coverage Bona Wave 2K provides an approximate coverage of **810 square metres per litre per coat**, depending on the surface, application technique and condition of the timber. The first coat may absorb differently depending on the porosity of the wood, while subsequent coats can provide more consistent coverage. Planning the quantity required before beginning a project is recommended, as running out of product partway through a floor can interrupt the finishing process. ## Simple Maintenance After Application A quality lacquer provides an excellent protective foundation, but regular maintenance remains important. Once the floor has fully cured, remove loose dust and grit regularly to prevent abrasive particles from being walked across the surface. Use suitable cleaning products designed specifically for lacquered wooden flooring. Avoid excessive water when cleaning timber floors and deal with spills promptly. Regular cleaning helps maintain the appearance of the lacquer while reducing the build-up of dirt that can contribute to premature wear. ## Why Choose Bona Wave 2K? Bona Wave 2K combines **genuine two-component durability, fast drying, low VOC emissions and an attractive non-yellowing finish**. It provides excellent resistance to scratches, scuffs, chemicals and high-heel marks, making it suitable for demanding residential flooring and moderate commercial traffic. Its water-based formulation helps preserve the natural appearance of timber, while the choice of Matt or Semi-Gloss provides flexibility over the final look. For customers who need more durability than a standard floor lacquer can provide without moving into the premium cost of an extreme heavy-duty commercial system, Bona Wave 2K is a practical and professional solution. ## Give Your Wooden Floor Long-Lasting Protection A wooden floor is an investment, and choosing the right protective finish is essential for keeping it attractive and well maintained. **Bona Wave 2K Water-Based Floor Lacquer** provides a powerful combination of durability, appearance and convenience. Its two-component polyurethane technology creates a tough protective surface, while its fast drying time helps keep flooring projects moving efficiently. The low-VOC, water-based formulation provides a modern finishing solution, and its non-yellowing properties allow the natural beauty of the timber to remain visible. Available in **Matt and Semi-Gloss finishes**, Bona Wave 2K is suitable for a wide range of interior styles and flooring applications. For high-traffic homes, moderate-use commercial spaces and professional floor renovation projects, **Bona Wave 2K** offers dependable protection, excellent wear resistance and a beautiful finish that helps wooden floors stay looking their best.

3 # Bona Traffic HD Raw Ultra-Matt Water-Based Lacquer for a Natural Wood Finish Give your wooden floors the protection they need without losing their beautiful, natural appearance with **Bona Traffic HD Raw**. This premium two-component water-based floor lacquer is specially designed for customers who want the authentic look and feel of untreated timber while still benefiting from the durability of a professional high-traffic floor finish. Traditional lacquers can sometimes add a noticeable sheen to wooden flooring, changing the appearance of the timber and creating a more polished or artificial look. Bona Traffic HD Raw takes a different approach. Its ultra-matt finish is designed to be exceptionally subtle, helping preserve the natural colour, grain and texture of the wood while providing a tough protective coating. The result is a floor that looks almost untreated but has the strength and protection of a high-performance lacquer. ## Ultra-Matt Natural Appearance One of the biggest advantages of Bona Traffic HD Raw is its **ultra-matt appearance**. With an extremely low level of sheen, the finish is designed to remain consistently matt from different viewing angles. This is ideal for modern interiors where a natural, understated wooden floor is preferred. Instead of creating a glossy surface that reflects light, Bona Traffic HD Raw allows the timber itself to remain the main feature. The result is particularly effective with natural oak, engineered wood, parquet and other attractive timber floors where preserving the authentic character of the wood is important. The ultra-matt appearance can also help create the popular Scandinavian-style flooring look, providing a clean and contemporary finish that works well with both traditional and modern interiors. ## The Look and Feel of Raw Wood Bona Traffic HD Raw is designed to provide more than just a natural appearance. It also aims to maintain the **look and feel of raw wood**. The finish follows the natural texture and grain of the timber, helping create a surface that feels less like a heavily coated floor. This can be particularly noticeable when walking across the floor barefoot. For homeowners and designers who love the appearance of untreated timber but want the easier maintenance and protection of a lacquered surface, this provides an excellent compromise. You can achieve the visual character of a raw wooden floor without leaving the timber completely unprotected. ## High-Traffic Protection Despite its subtle appearance, Bona Traffic HD Raw is far from a delicate finish. It belongs to the Bona Traffic HD family of high-performance floor lacquers and is designed to provide **excellent protection in high-traffic environments**. Wooden floors in busy homes, offices, shops, restaurants and other commercial spaces can experience considerable wear. Foot traffic, dirt, furniture movement and regular cleaning can all affect the surface over time. Bona Traffic HD Raw provides a durable protective layer designed to help the timber withstand these everyday demands. This makes it suitable for customers who do not want to compromise between appearance and performance. ## Excellent Wear and Scuff Resistance Busy floors can quickly develop visible marks, particularly in entrances, corridors and other high-use areas. Bona Traffic HD Raw is designed to provide strong resistance to **wear and scuffing**, helping maintain the appearance of the finished floor. The protective coating helps reduce the impact of everyday activity, allowing the timber to remain looking attractive for longer when properly maintained. This makes the product suitable for both domestic and commercial flooring projects where durability is a priority. It is particularly useful where the customer wants an ultra-matt appearance but still needs a finish capable of handling substantial daily traffic. ## Strong Chemical Resistance Floors in commercial environments may come into contact with a variety of cleaning products and substances. Bona Traffic HD Raw offers strong **chemical resistance** once fully cured, helping protect the lacquer from the effects of everyday cleaning and exposure. This is particularly useful in offices, shops, hospitality environments and other areas where regular cleaning is essential. As always, compatible floor cleaning products should be used as part of the ongoing maintenance programme. Avoid unsuitable chemicals or excessive moisture, as these can affect the performance and appearance of any wooden floor finish. ## Natural Anti-Slip Properties Bona Traffic HD Raw also offers **natural anti-slip properties**, making it a practical option for areas where maintaining good underfoot grip is important. This can be particularly beneficial in busy homes, offices, retail spaces and other commercial environments. The natural texture of the ultra-matt finish helps provide a more authentic wooden surface rather than creating a highly polished, slippery-looking appearance. Good cleaning and maintenance remain important, particularly in areas where moisture or spills may occur. ## Two-Component Water-Based Formula Bona Traffic HD Raw is a **two-component waterborne polyurethane coating**. The lacquer is supplied with a separate hardener, which must be mixed with the lacquer before application. The two-component system provides the high level of durability required for demanding flooring environments. Once correctly mixed and applied, it creates a tough protective surface over the timber. The water-based formulation is also designed to provide a low-odour application experience compared with traditional solvent-heavy floor finishes. Always follow the manufacturer's instructions for mixing, application, ventilation and drying to achieve the best possible results. ## Fast Recoating Another major advantage for professional flooring contractors is the product's relatively fast drying time. Under suitable conditions, Bona Traffic HD Raw can generally be **recoated after approximately 23 hours**. This allows flooring projects to progress efficiently and can help reduce the amount of time a room or commercial area needs to remain out of use. Actual drying times can vary depending on temperature, humidity, ventilation, application rate and the condition of the floor, so these factors should always be taken into consideration when planning a project. For larger commercial refurbishment projects, fast recoating can make a significant difference to overall project efficiency. ## Suitable for Commercial and Domestic Floors Although Bona Traffic HD Raw is designed for demanding traffic conditions, it is equally suitable for residential applications. In busy family homes, wooden floors can experience considerable wear from children, pets, visitors and everyday activity. Bona Traffic HD Raw provides a way to protect the timber without changing its natural appearance. Commercial applications can include: * Offices * Shops * Restaurants * Hotels * Schools * Public buildings * Retail spaces * Hospitality environments * Other high-traffic interiors Its combination of durability and ultra-matt aesthetics makes it particularly appealing for designers and property owners who want a natural-looking floor in a busy environment. ## Ideal for Modern Interior Design Natural wood finishes continue to be popular in contemporary interior design. Many customers want their flooring to look as close to untreated timber as possible rather than appearing heavily varnished. Bona Traffic HD Raw is specifically designed around this idea. Its extremely low sheen works beautifully with minimalist interiors, Scandinavian-inspired designs and modern spaces that favour natural materials. The finish can also be used to create different decorative effects when combined with suitable Bona primers or colour products. For example, white-toned finishes can create a cool Nordic appearance, while other compatible colour treatments can be used to alter the tone of the timber. This gives designers and flooring professionals considerable flexibility. ## Excellent for Oiled-Look Floors One of the main reasons customers choose Bona Traffic HD Raw is that it can create an appearance similar to an **oiled wooden floor**, while providing the protective advantages of a lacquered system. Oiled floors are popular because they provide a natural, tactile appearance, but they can require more frequent maintenance and periodic re-oiling. Bona Traffic HD Raw offers an alternative for customers who love the natural aesthetic of oil but want a hard-wearing lacquered surface that is easier to maintain. This makes it an excellent choice for busy households and commercial spaces where regular intensive maintenance may not be practical. ## Professional Application For the best results, the floor should be properly prepared before application. Timber should be fully sanded, clean, dry and free from dust, oil, wax and other contamination. The product can be used as part of a suitable Bona floor finishing system, depending on the desired result and the condition of the timber. Bona Traffic HD Raw can be applied using an appropriate professional floor lacquer roller. Careful and even application is important for achieving a consistent ultra-matt appearance across the entire floor. The product should be mixed correctly with its hardener immediately before use, and the mixed product should be used within its recommended working time. ## Coverage and Application Bona Traffic HD Raw provides an approximate coverage of **810 square metres per litre per coat**, depending on the surface and application method. Coverage can vary according to the condition and porosity of the timber, the quality of sanding and the application technique. Professional preparation and an even application are important for achieving the most consistent result. The floor should also be allowed sufficient time to dry and cure before being subjected to heavy traffic. ## Low-Odour Water-Based Finish Bona Traffic HD Raw has been designed with a **low-odour application experience**, making it a practical option for indoor flooring projects. Its water-based formulation is well suited to modern interior refurbishment, where reducing unpleasant fumes and odours during application is an important consideration. The product also meets stringent indoor air emission requirements, making it suitable for environments where attention to indoor air quality is important. Appropriate ventilation should always be provided during application and drying. ## Why Choose Bona Traffic HD Raw? Bona Traffic HD Raw offers an impressive combination of **ultra-matt aesthetics and professional-grade protection**. It provides the natural look and feel of untreated timber while offering the durability, scuff resistance, chemical resistance and anti-slip properties expected from a high-performance Traffic HD floor lacquer. The two-component water-based system provides excellent protection for demanding environments, while the rapid recoating time helps flooring professionals complete projects efficiently. Most importantly, the ultra-matt finish allows the natural character of the wood to remain the focus. ## Protect Your Floor Without Losing Its Natural Beauty If you love the appearance of raw timber but need the protection of a high-performance lacquer, **Bona Traffic HD Raw** offers an ideal solution. Its ultra-matt finish creates an authentic, natural appearance with virtually no visible sheen, while the tough two-component formulation protects the timber against everyday wear, scuffing and chemical exposure. Suitable for both domestic and commercial environments, it is an excellent choice for busy homes, offices, shops, restaurants, schools and other high-traffic areas. For customers who want **natural beauty without sacrificing durability**, Bona Traffic HD Raw provides the best of both worlds: the authentic look and feel of raw wood combined with professional-quality lacquer protection.

3 # Bona Traffic HD High Traffic Floor Lacquer Professional 2K Water-Based Wood Floor Protection Protect and enhance wooden floors in demanding environments with **Bona Traffic HD High Traffic Floor Lacquer**. This premium two-component, water-based floor lacquer is designed specifically for wood floors exposed to heavy foot traffic and extreme wear. It combines exceptional durability with an impressively fast drying time, making it an excellent choice for commercial premises, public buildings, hospitality environments and busy residential spaces. When a wooden floor is used every day by large numbers of people, it needs more than a standard protective coating. Constant foot traffic, dirt, furniture movement and regular cleaning can gradually wear down the surface and affect its appearance. Bona Traffic HD provides a tough, professional-quality protective finish designed to help wooden floors cope with these demanding conditions while maintaining their natural beauty. Available in **Matt and Semi-Gloss finishes**, Bona Traffic HD also gives you flexibility when choosing the final appearance of your floor. ## High-Performance Protection for Heavy Traffic Bona Traffic HD has been developed for areas where wooden floors experience particularly high levels of use. Its advanced two-component formulation creates a durable protective layer designed to withstand the demands of busy environments. This makes it an excellent choice for locations such as hotels, restaurants, airports, offices, retail premises, schools, public buildings and other commercial spaces. It can also be used in homes where flooring experiences exceptionally heavy daily traffic. The strong protective coating helps reduce the effects of everyday wear, allowing the timber underneath to remain attractive and well maintained for longer. For professional flooring contractors, the combination of durability and rapid drying can also help reduce disruption and improve efficiency when completing large flooring projects. ## Professional 2K Water-Based Technology Bona Traffic HD is a **two-component water-based floor lacquer**, also known as a 2K system. The two components work together to create a highly durable protective finish suitable for demanding applications. Unlike a basic one-component floor lacquer, a two-component system provides enhanced performance for areas where the floor needs to withstand substantial levels of use. The water-based formulation also makes Bona Traffic HD a modern choice for interior wood floor finishing. It provides a professional protective coating while maintaining the attractive appearance of the timber. As with any two-component floor coating, correct preparation, mixing and application are important. The components should always be combined and applied according to the manufacturer's instructions to achieve the intended performance. ## Exceptionally Fast Drying One of the standout benefits of Bona Traffic HD is its **rapid drying time**. The product is designed to allow the floor to be returned to full use approximately **12 hours after application**, under suitable conditions and when the recommended application system has been followed. This can make a significant difference when working in commercial premises where closing an entire area for an extended period is not practical. Hotels, restaurants, shops, offices and other businesses can benefit from a floor finishing system that helps minimise downtime. Faster completion means less disruption for staff, customers and visitors. For flooring contractors, the fast drying characteristics can also make it easier to plan projects around tight schedules. ## Ideal for Large Floor Areas Bona Traffic HD is particularly well suited to **large wooden floors**. Sports halls, hotel corridors, public buildings, commercial interiors and other extensive areas can require a floor finish that combines durability with efficient application. The fast drying performance is especially valuable when large areas need to be completed within a limited timeframe. Instead of leaving a commercial space unavailable for several days, a suitable high-performance lacquer can help shorten the overall renovation process when used as part of the correct floor finishing system. This makes Bona Traffic HD a practical choice for professional refurbishment projects where time, durability and appearance are all important. ## Trusted for Demanding Commercial Applications High-traffic environments place considerable pressure on flooring. Areas such as hotel lobbies, restaurant floors and airport interiors are exposed to constant movement and frequent cleaning. Bona Traffic HD is designed specifically for this type of demanding environment. Its high-performance protective coating helps wooden floors withstand the wear associated with intensive everyday use. For commercial property owners and facilities managers, maintaining the condition of the floor is an important part of keeping an interior looking professional. A worn or poorly maintained floor can quickly make an otherwise attractive space look tired. Using a specialist high-traffic lacquer provides a strong foundation for an effective long-term floor care programme. ## Maintains the Natural Appearance of Wood Wooden flooring is popular because of its natural grain, warmth and character. A good floor lacquer should protect the timber without unnecessarily hiding these features. Bona Traffic HD provides a clear protective finish that allows the appearance of the wood to remain visible. The final result will depend on the timber species, sanding process, preparation and selected sheen, but the lacquer is designed to create an attractive professional finish. The **Matt** option provides a subtle, understated appearance that works particularly well in modern interiors. The **Semi-Gloss** option provides a slightly more reflective appearance for those who prefer a little more sheen. Both options offer flexibility when creating the desired style for a residential or commercial interior. ## Matt and Semi-Gloss Finishes Choosing the right sheen can have a significant effect on the appearance of a wooden floor. The **Matt finish** is ideal for customers who want to retain a natural-looking appearance with minimal reflection. It can help create a contemporary and understated look while allowing the character of the timber to remain prominent. The **Semi-Gloss finish** provides greater light reflection and can give the floor a brighter, more polished appearance. Having both options available means Bona Traffic HD can be adapted to a range of interior styles, from modern homes to traditional commercial environments. ## Suitable for Professional Floor Contractors Bona Traffic HD is particularly suited to professional floor sanding and finishing contractors who require a reliable lacquer for demanding projects. Before application, the timber should be properly sanded and prepared. The surface needs to be clean, dry and free from dust, grease, wax and other contamination. Using a compatible Bona primer as part of the complete finishing system can help provide an even and attractive result. The lacquer should then be mixed and applied according to the manufacturer's recommended procedure. Professional application equipment should be used to ensure an even coating and consistent finish across the entire floor. ## Efficient Floor Renovation Floor renovation can cause significant disruption, particularly in commercial premises. Furniture may need to be removed, rooms may need to be closed and normal activities may have to stop while the work is completed. Bona Traffic HD helps address this challenge with its fast-drying performance. The ability to return the floor to full use in around 12 hours can help businesses plan refurbishment work around their normal operating schedules. For example, a commercial space may be able to have its floor refinished outside normal opening hours, reducing the impact on customers and staff. This makes the product particularly attractive for businesses that cannot afford lengthy periods of downtime. ## Easy Maintenance After Application A high-quality lacquer is an important part of protecting a wooden floor, but regular maintenance is equally important. Once the Bona Traffic HD system has been fully cured, the floor should be maintained using suitable cleaning products designed for lacquered wooden flooring. Regular removal of dust, grit and dirt helps reduce abrasive wear. Grit particles can act like tiny abrasives when walked across the floor repeatedly, so keeping busy areas clean is an important part of preserving the finish. Spills should also be dealt with promptly, and excessive water should be avoided when cleaning wooden floors. With the right maintenance routine, the protective coating can continue to provide excellent performance over an extended period. ## Why Choose Bona Traffic HD? Bona Traffic HD combines **exceptional durability, fast drying and professional water-based technology** in a premium two-component floor lacquer. It is designed specifically for wooden floors exposed to heavy traffic and extreme wear, making it suitable for some of the most demanding flooring environments. Its rapid drying performance helps reduce downtime, while the choice of Matt or Semi-Gloss finishes provides flexibility over the final appearance. Whether you are a professional flooring contractor, facilities manager, business owner or homeowner, Bona Traffic HD offers a high-performance solution when ordinary floor lacquer simply is not enough. ## Give Your Wooden Floor Professional-Grade Protection When a wooden floor needs to cope with constant use, choosing a high-performance protective coating can make all the difference. **Bona Traffic HD High Traffic Floor Lacquer** provides professional-grade protection designed for demanding environments and heavy everyday wear. Its two-component water-based formulation creates a durable finish, while its fast drying characteristics allow floors to return to use quickly. With Matt and Semi-Gloss options available, you can achieve the level of sheen that best suits your interior. From busy hotels and restaurants to offices, airports, retail spaces and high-use homes, Bona Traffic HD provides a dependable finishing solution for wooden floors that need to look their best while standing up to intensive use. **Choose Bona Traffic HD for durable protection, fast project turnaround and a professional-quality finish built for high-traffic wooden floors.**

3 # Bona Traffic HD Anti-Slip Premium Water-Based Lacquer for High-Traffic Wood Floors Protect wooden floors in demanding environments with **Bona Traffic HD Anti-Slip**, a premium two-component water-based floor lacquer designed to provide outstanding durability together with enhanced slip resistance. Developed for areas where floors experience heavy foot traffic and where safety is especially important, this professional-quality lacquer is an excellent choice for commercial spaces, staircases, public buildings and other busy interior areas. Wooden floors can add warmth, character and style to almost any interior, but high-use areas need a finish that can cope with constant wear. Bona Traffic HD Anti-Slip combines the high-performance protection associated with the Traffic HD range with added slip-resistant properties, helping create a hard-wearing and safer surface without sacrificing the natural appearance of the timber. ## High-Performance Protection for Busy Floors Floors in commercial and public environments can experience significantly more wear than those in a typical home. Constant foot traffic, dirt, furniture movement and regular cleaning can gradually affect an unprotected wooden surface. Bona Traffic HD Anti-Slip is designed to withstand these demanding conditions. Its professional two-component formulation creates a durable protective layer that helps protect timber flooring against everyday wear and tear. This makes it particularly suitable for environments such as offices, retail spaces, restaurants, schools, corridors, staircases and other areas where large numbers of people regularly use the floor. For residential applications, it can also provide an excellent level of protection in particularly busy areas of the home. ## Enhanced Slip Resistance The key feature that sets Bona Traffic HD Anti-Slip apart is its **enhanced slip-resistant performance**. The lacquer is designed to meet high slip-resistance standards, making it especially useful in locations where the possibility of slipping needs to be carefully considered. Smooth flooring can become more challenging to manage when exposed to spills, moisture or heavy traffic. Adding a slip-resistant finish can help provide additional grip underfoot while maintaining the attractive appearance of the wooden floor. This makes Bona Traffic HD Anti-Slip particularly suitable for **commercial areas, staircases and other locations where spills or slips are more likely**. As with any floor finish, good housekeeping remains important. Spills should be cleaned promptly, and appropriate cleaning and maintenance procedures should be followed to keep the floor performing as intended. ## Two-Component Water-Based Formulation Bona Traffic HD Anti-Slip is a **two-component water-based lacquer**, combining a professional-quality floor finish with a separate hardening component. The two-component system is designed to deliver excellent durability and resistance to the demands of high-traffic environments. Once the components are correctly combined according to the manufacturer's instructions, the lacquer forms a strong protective coating over the timber. Water-based technology also makes the product well suited to interior flooring projects where a modern, professional finishing system is required. Correct mixing and application are essential when working with a two-component product. Always follow the manufacturer's instructions regarding the mixing ratio, application method, drying times and working conditions. ## Suitable for Commercial Flooring Bona Traffic HD Anti-Slip is particularly well suited to **commercial and public environments** where wooden floors need a highly durable protective finish. Potential applications include: * Offices * Retail premises * Restaurants * Hotels * Schools * Public buildings * Corridors * Reception areas * Community facilities * Commercial staircases * Other high-traffic interior spaces These environments can place significant demands on flooring. A professional lacquer helps protect the timber while maintaining an attractive and presentable appearance. For businesses and facilities managers, choosing a high-performance floor finish can also help reduce the frequency of major refurbishment by providing long-lasting protection when the product is correctly applied and maintained. ## Ideal for Staircases Staircases are one of the most important applications for a slip-resistant floor finish. Unlike a flat floor, stairs require users to maintain their balance while moving between different levels, making appropriate surface characteristics particularly important. Bona Traffic HD Anti-Slip is designed for areas such as staircases where enhanced slip resistance is required. It provides the opportunity to protect wooden stair treads while adding a level of slip-resistant performance. This makes it a practical option for both commercial staircases and other suitable high-use wooden steps. As always, the complete flooring system, installation, cleaning routine and surrounding conditions should be considered when assessing floor safety. ## Maintains the Natural Beauty of Wood Durability and safety are important, but appearance also matters. Wooden flooring is often selected because of its natural grain, warmth and character, so a protective coating should complement rather than hide these qualities. Bona Traffic HD Anti-Slip provides a clear protective finish that allows the natural appearance of the timber to remain visible. The final appearance will depend on the type of wood, sanding process, primer, application technique and chosen sheen. Proper preparation is therefore an important part of achieving a professional result. When applied correctly, the lacquer can create a consistent, attractive surface while allowing the natural character of the timber to remain a feature of the room. ## Professional Wood Floor Finishing Bona Traffic HD Anti-Slip is designed for professional flooring applications and is particularly suitable for floor sanding and finishing contractors. Before application, the wooden floor should be correctly sanded and prepared. Dust, grease, wax, oil and other contaminants should be removed so that the lacquer can adhere properly. Depending on the flooring system, an appropriate Bona primer may be used before applying the lacquer. Following a compatible system helps achieve a consistent result and supports the long-term performance of the finished floor. The lacquer should be applied evenly using appropriate professional flooring equipment, with adequate drying time allowed between coats. ## A Reliable Choice for High-Traffic Areas The Traffic HD range is designed for demanding flooring environments, and the Anti-Slip version adds enhanced slip resistance to this high-performance protection. This combination makes it particularly useful where both **durability and underfoot grip** are important considerations. Busy commercial floors can quickly show signs of wear if they are not properly protected. A suitable high-performance lacquer helps create a surface that is better equipped to cope with daily use. For property owners and facilities managers, maintaining the protective finish is also important. Regular cleaning with appropriate products can help remove dirt and grit that could otherwise contribute to surface wear. ## Water-Based Technology The water-based formulation provides a modern approach to professional wood floor finishing. Water-based lacquers are widely used for interior flooring because they provide durable protective coatings while offering practical application characteristics. Bona Traffic HD Anti-Slip is designed as a professional water-based system, making it suitable for interior projects where a high-performance lacquer is required. As with all floor coatings, ventilation, temperature and humidity can influence application and drying. Always follow the product's technical and safety instructions to achieve the best possible results. ## Easy to Incorporate into a Complete Floor Care System A durable floor finish works best when it is supported by an appropriate maintenance programme. Once Bona Traffic HD Anti-Slip has been applied and fully cured, regular cleaning can help preserve its appearance and performance. Loose dust and grit should be removed regularly, as abrasive particles can contribute to wear when repeatedly walked across the surface. Suitable cleaning products should be used to avoid damaging the protective coating. Spills should also be dealt with promptly, particularly in areas where enhanced slip resistance is important. A well-planned maintenance routine can help extend the useful life of the finished floor and keep it looking professional for longer. ## Why Choose Bona Traffic HD Anti-Slip? Bona Traffic HD Anti-Slip combines **premium durability, water-based technology and enhanced slip resistance** in one professional floor lacquer. Its two-component formulation is designed for demanding environments where ordinary floor finishes may not provide enough protection. At the same time, its slip-resistant properties make it particularly suitable for staircases and other areas where the risk of slipping needs additional consideration. The product is ideal for commercial premises, public buildings and high-traffic spaces where wooden flooring needs to remain both attractive and hard wearing. For professional floor contractors, facilities managers and property owners, it provides a dependable solution for protecting timber flooring in demanding interior environments. ## Protect Your Wooden Floor with Bona Traffic HD Anti-Slip When wooden floors are exposed to heavy traffic, choosing the right protective finish is essential. **Bona Traffic HD Anti-Slip** provides the combination of durability and enhanced slip resistance needed for demanding environments. Its premium two-component water-based formulation helps protect timber against everyday wear while maintaining the natural beauty of the wood. The added slip-resistant properties make it an excellent choice for commercial areas, staircases and other spaces where additional underfoot grip is desirable. Whether you are finishing a busy commercial floor, renovating a staircase or protecting wooden flooring in a public building, Bona Traffic HD Anti-Slip provides a professional-quality finishing solution designed for high-use environments. Choose **Bona Traffic HD Anti-Slip** for durable, high-performance protection with added slip resistance, helping your wooden floors remain attractive, protected and suitable for demanding everyday use.

3 # Bona Traffic GO High-Performance Water-Based Floor Lacquer Protect and enhance wooden floors with **Bona Traffic GO**, a next-generation water-based floor lacquer designed to deliver outstanding durability while keeping application simple. Combining the convenience of a one-component lacquer with the high-wear performance normally associated with a two-component floor finish, Bona Traffic GO is an excellent choice for both commercial and residential floors exposed to heavy foot traffic. Whether you are finishing a busy hallway, school, restaurant, office, retail space, sports facility or high-use area in the home, Bona Traffic GO provides a tough, professional-quality protective coating designed to withstand everyday wear. Its innovative built-in hardener means there is no separate hardener to measure, mix or dispose of. Simply shake the container and apply. This makes the finishing process easier, cleaner and more efficient. ## High-Wear Protection for Busy Floors Wooden floors can experience a huge amount of daily wear. Foot traffic, furniture, dirt and regular cleaning can gradually affect the appearance of an unprotected timber surface. Bona Traffic GO is specifically designed for areas where durability is important. Its high-performance polyurethane formulation creates a strong protective layer over the timber, helping the floor withstand the demands of regular use. It is particularly suitable for high-traffic commercial environments, but its excellent durability also makes it a great option for busy homes. Entrance halls, kitchens, living rooms and other frequently used areas can all benefit from a hard-wearing floor finish. The result is a professionally finished floor that is better protected against everyday wear while retaining the natural beauty of the timber. ## Innovative Built-In Hardener One of the most useful features of Bona Traffic GO is its **built-in hardening technology**. Traditional two-component floor lacquers require a separate hardener to be measured and mixed with the lacquer before application. Bona Traffic GO removes this extra step. The hardener is already incorporated into the product and is activated during application. This gives you the performance advantages associated with a two-component finish without the inconvenience of mixing separate components. There is no need to calculate hardener quantities, no complicated mixing process and no concern about leftover mixed product becoming unusable. ## Shake and Go Bona Traffic GO is designed around a simple **Shake & Go** application process. Before use, the container is shaken thoroughly and the lacquer can then be applied as directed. This straightforward approach makes the product particularly convenient for professional flooring contractors who want to minimise preparation time. It is also useful when completing larger projects where efficiency is important. Removing the need for a separate hardener means fewer stages in the application process and less opportunity for errors caused by incorrect mixing. ## No Mixing and No Wastage Because Bona Traffic GO contains its hardener within the formulation, there is no need to mix a separate component before application. This also eliminates the traditional pot-life issue associated with many two-component products. With no mixed product left over, there is less potential for unnecessary waste. This can make Bona Traffic GO a more efficient option for flooring professionals who need a dependable lacquer that is ready to use without the additional preparation associated with conventional 2K systems. ## Water-Based Floor Lacquer Bona Traffic GO is a **waterborne polyurethane floor coating**, providing a modern alternative to traditional solvent-based floor lacquers. Water-based floor finishes are particularly popular for interior flooring because they provide a professional protective coating while helping maintain a more comfortable working environment during application. Bona Traffic GO is also designed to provide a clear, non-yellowing finish, allowing the natural colour of the timber to remain visible. This is especially useful when you want to preserve the fresh, natural appearance of a newly sanded wooden floor rather than creating an artificially darkened or amber-toned finish. ## Clear and Non-Yellowing Finish Wood flooring is often chosen for its natural beauty, so protecting it should not mean hiding its character. Bona Traffic GO provides a clear coating designed to preserve the appearance of the timber underneath. The non-yellowing formulation helps the floor retain its natural colour over time. This makes it suitable for a wide range of timber species and interior styles. Depending on the selected sheen, you can create a more understated, contemporary appearance or a slightly more reflective finish. Available finishes include **Matt, Silkmatt and Extra Matt**, allowing you to choose the level of sheen that best suits the flooring and surrounding interior. ## Natural-Looking Results Modern interiors increasingly favour natural-looking wooden floors rather than highly glossy finishes. Bona Traffic GO provides several sheen options to help achieve the desired appearance. The **Matt and Extra Matt** finishes are particularly suitable for modern interiors where a subtle, understated floor is preferred. Silkmatt provides a little more sheen while still maintaining a refined appearance. The final result will naturally depend on the timber, preparation, primer and application technique, but the range of available finishes provides flexibility when designing the overall look of the floor. ## Fast Drying Between Coats Bona Traffic GO offers a practical drying time, with approximately **23 hours between coats under normal conditions**. This allows flooring projects to progress efficiently without lengthy waiting periods between applications. Faster recoating can be particularly valuable for professional contractors working to tight schedules. It can also help reduce disruption when floors are being renovated in commercial premises or occupied buildings. Temperature, humidity, ventilation and the condition of the floor can all influence drying times, so the manufacturer's recommended application conditions should always be followed. ## Suitable for Commercial and Residential Floors Bona Traffic GO is designed for both **commercial and domestic applications**. Its high-wear performance makes it especially well suited to areas that experience significant foot traffic. Commercial applications can include offices, shops, restaurants, schools, public buildings and other busy interior environments. In residential properties, it can be used in high-use areas where a particularly durable floor finish is required. Homes with children, pets or frequent visitors can benefit from a protective coating designed to cope with everyday activity. ## Works with Bona Primers Bona Traffic GO can be combined with Bona water-based wood floor primers as part of a complete floor finishing system. Using a compatible primer helps prepare the timber for the lacquer and can contribute to a consistent, attractive final finish. The floor should be properly sanded, clean, dry and free from dust, oil, wax and other contamination before application. Correct preparation is essential for good adhesion and long-term performance. For untreated wooden floors, the recommended system includes a Bona water-based primer followed by Bona Traffic GO coats. ## Can Be Used with Bona Craft Oil 2K For projects where you want the appearance of an oiled wooden floor combined with the durability and easier maintenance of a lacquered surface, Bona Traffic GO can also be used with **Bona Craft Oil 2K**. This provides additional flexibility for creating distinctive floor finishes. Bona Craft Oil 2K can add colour and an oiled appearance, while Traffic GO provides a durable protective topcoat. This combination can be particularly useful for designers, flooring contractors and homeowners looking for a specific decorative finish without sacrificing everyday durability. ## Suitable for Professional Flooring Projects Bona Traffic GO is an excellent choice for professional floor sanding and finishing contractors. Its combination of high durability, simple preparation and fast drying makes it practical for demanding projects. The application rate is approximately **810m per litre per coat**, depending on the surface and application conditions. For the best results, use an appropriate Bona roller or professional floor lacquer applicator and maintain a wet edge during application. Avoid excessive build-up and allow each coat to dry properly before continuing with the next stage. ## Low Indoor Emissions Bona Traffic GO has been certified **EMICODE EC1PLUS**, indicating very low indoor air emissions. This makes it a suitable option for projects where attention to indoor air quality is important. It is also designed without the need for an external isocyanate hardener, simplifying handling compared with conventional two-component systems. As with any professional floor coating, appropriate ventilation and the manufacturer's safety and application instructions should always be followed. ## Maintenance and Long-Term Floor Care A high-quality lacquer is only part of maintaining a wooden floor. Regular cleaning and appropriate maintenance are essential for keeping the finished surface looking its best. Dust and grit should be removed regularly to reduce abrasive wear. Suitable cleaning products designed for lacquered wooden floors should be used, while excessive water and unsuitable household chemicals should be avoided. The correct maintenance routine can help preserve the appearance of the lacquer and extend the period between major refurbishment projects. ## Why Choose Bona Traffic GO? Bona Traffic GO combines **high-performance durability with simple one-component application**. Its built-in hardener provides the performance of a 2K system without the need to mix a separate hardener. The result is a professional floor lacquer that is easy to prepare, efficient to apply and suitable for demanding residential and commercial environments. With its water-based formulation, clear non-yellowing appearance, low indoor emissions and choice of Matt, Silkmatt and Extra Matt finishes, it provides both practical protection and attractive visual results. ## Give Your Wooden Floor Long-Lasting Protection For floors that need to withstand heavy everyday use, **Bona Traffic GO** provides a reliable combination of durability, convenience and modern water-based technology. Its built-in hardener eliminates the need for mixing, while the fast drying time allows flooring projects to progress efficiently. The clear, non-yellowing finish helps preserve the natural appearance of timber, and the choice of sheen levels makes it easy to create the desired look. Whether you are renovating a busy family home, school, office, restaurant, shop or other high-traffic interior, Bona Traffic GO provides a professional-quality protective finish designed to keep wooden floors looking attractive and well protected. Choose **Bona Traffic GO** for high-performance floor protection without the complexity of a traditional two-component lacquer.

3 # Bona Gap Master Coloured Flexible Gap Filler for Wood Floors Give wooden floors a neat, professional finish with **Bona Gap Master**, a flexible coloured gap filler designed for sealing gaps, cracks and small areas of damage in wood flooring. This ready-to-use acrylic mastic provides a simple and effective way to improve the appearance of timber floors while helping seal unwanted gaps between floorboards. Unlike rigid fillers that can crack when a wooden floor naturally moves, Bona Gap Master remains permanently elastic after application. This flexibility makes it particularly useful for wooden flooring, where seasonal changes in temperature and humidity can cause boards to expand and contract. Available in a wide choice of wood-inspired colours, Bona Gap Master makes it easier to create a repair that blends naturally with the surrounding floor. Whether you are working with oak, beech, maple, teak, wenge or another timber shade, there is a colour option to complement the flooring. ## Flexible Filler for Wooden Floors Wood is a natural material that moves over time. Changes in temperature and humidity can cause floorboards to expand, contract and move slightly. A rigid filler may struggle to cope with this movement, potentially leading to cracks or separation. Bona Gap Master is designed with flexibility in mind. Its permanently elastic formulation allows the filler to accommodate normal movement in the floor, making it a practical choice for sealing gaps where a flexible solution is required. This makes it particularly useful during wooden floor renovation and finishing projects. Instead of leaving visible gaps between boards, the filler can help create a cleaner and more consistent appearance. ## Ideal for Sealing Gaps and Cracks Gaps between wooden floorboards can become noticeable over time. They can also collect dust and dirt, making the floor more difficult to keep clean. Bona Gap Master provides a convenient way to seal suitable gaps and cracks while improving the overall appearance of the floor. The product can be used to fill gaps in timber flooring and repair minor areas of damage. Once applied correctly, it creates a neat filled surface that can blend into the surrounding wood. For renovation projects, gap filling can make a significant difference to the finished appearance. Even when the timber itself is in good condition, visible gaps can make a floor look unfinished. Filling appropriate gaps helps create a more uniform surface before the floor is lacquered or otherwise finished. ## A Choice of Natural Wood Colours One of the key advantages of Bona Gap Master is its range of colour options. The filler is available in **15 colours**, giving you greater flexibility when matching the product to the existing timber. Available shades include: * Grey * Maple * Dark Oak * Wenge * Light Oak * Light Beech * Dark Beech * Black * Teak * Red Exotic Wood * Nut * Bog Oak * White * Ash The range includes both light and dark shades, making it easier to choose a colour that works with the appearance of the flooring. Choosing a suitable colour can help the filled areas blend more naturally into the surrounding boards. As natural wood can vary in colour and grain, the final result will depend on the existing timber, its finish and the condition of the floor. ## Solvent-Free and Odourless Bona Gap Master is a **solvent-free acrylic mastic**, making it a convenient option for interior flooring work. It is also odourless, which can be particularly beneficial when carrying out repairs or renovation work inside occupied homes and other indoor spaces. The absence of a strong solvent smell makes the product more comfortable to work with during flooring projects. However, normal good practice should still be followed when applying any flooring product, including ensuring suitable ventilation and following the manufacturer's instructions. ## Compatible with Bona Lacquers Bona Gap Master is compatible with **Bona lacquers**, making it an excellent addition to a complete Bona wood floor finishing system. This compatibility is particularly useful when renovating a wooden floor. Once suitable gaps and damaged areas have been filled and the floor has been properly prepared, a compatible lacquer can be applied as part of the finishing process. Using products designed to work together can help simplify flooring projects and make it easier to achieve a consistent professional finish. ## Suitable for Floor Renovation Projects Bona Gap Master is especially useful when bringing older wooden floors back into good condition. Over time, timber flooring can develop gaps, cracks and small areas of damage due to normal use, movement and changes in the surrounding environment. Rather than replacing otherwise serviceable floorboards, suitable gaps and minor damage can often be repaired as part of a wider renovation process. The filler can be used during preparation before sanding and finishing, helping create a cleaner surface for the subsequent stages of the project. For professional floor sanders and contractors, this makes Bona Gap Master a practical product to keep available when working on restoration and refurbishment projects. ## Helps Create a Cleaner Finished Floor A beautifully sanded wooden floor can still look untidy if large or obvious gaps remain between the boards. Gap filling helps address these imperfections and can make the finished floor appear more complete. Bona Gap Master can be applied to appropriate gaps and cracks before the final finishing stages. Once the repair has been completed and the floor is properly prepared, the filled areas can become much less noticeable. The result is a cleaner-looking wooden floor with a more consistent overall appearance. ## Easy to Match to Different Timber Styles Every wooden floor is different. Oak flooring has a different appearance from beech, while darker woods such as wenge or teak can require a completely different filler shade. The broad colour range of Bona Gap Master helps solve this problem. Instead of using a single universal colour, you can select a shade that is closer to the timber you are working with. For floors with distinctive colouring, the available darker, lighter and more natural shades provide additional flexibility. When selecting a colour, consider the existing floor finish as well as the bare timber, as the appearance can change after sanding, staining or lacquering. ## A Practical Choice for Professionals Bona Gap Master is designed with professional wood flooring applications in mind. Its flexible formulation, colour selection and compatibility with Bona lacquers make it a useful product for flooring contractors, restoration specialists and experienced DIY users. It can be used as part of a broader floor preparation and finishing system, helping address gaps and minor imperfections before the final finish is applied. Because it remains permanently elastic, it is particularly suited to situations where a degree of movement is expected from the timber flooring. ## How to Get the Best Results For the best results, the floor should be clean, dry and properly prepared before applying the filler. Remove loose dirt, dust and other contaminants from the area being repaired. Apply Bona Gap Master carefully to the suitable gap or crack, ensuring that the product is worked into the area effectively. Remove excess material as appropriate and allow it to dry according to the manufacturer's instructions before continuing with further floor preparation or finishing. Always check that the product is suitable for the particular gap, crack or repair before application. Larger structural problems or significantly damaged boards may require a different repair solution. ## Why Choose Bona Gap Master? Bona Gap Master combines **flexibility, easy application, colour choice and compatibility with Bona floor lacquers** in one practical product. Its permanently elastic formulation makes it particularly well suited to wooden floors, where natural movement can place stress on rigid fillers. The solvent-free, odourless formulation is convenient for interior use, while the selection of wood-inspired colours helps create a more natural-looking repair. Whether you are renovating an old timber floor, repairing gaps between boards or preparing a wooden floor for lacquering, Bona Gap Master provides a dependable way to improve the appearance of suitable gaps and cracks. ## Give Your Wooden Floor a Professional Finish Small details can make a big difference to the finished appearance of a wooden floor. Visible gaps and cracks can distract from the natural beauty of the timber, while a carefully completed repair can help create a cleaner, more polished result. With its permanently flexible formulation and wide choice of colours, **Bona Gap Master** is an excellent choice for sealing suitable gaps and repairing minor damage in wood floors. Choose the colour that best matches your flooring and create a neat, professional-looking finish that complements the natural character of your timber floor.

3 # Bona Domo Floor Lacquer Water-Based Wood Floor Finish Protect and enhance your wooden floors with **Bona Domo Floor Lacquer**, a high-quality water-based floor lacquer designed to provide a durable, attractive and professional finish for interior timber flooring. Developed for use on wooden floors, Bona Domo combines reliable protection with a natural-looking appearance, making it an excellent choice for both domestic and light commercial flooring projects. Whether you are finishing a newly installed wooden floor or renovating an existing timber surface, choosing the right lacquer is essential for helping protect the wood from everyday wear. Bona Domo provides a practical finishing solution that helps create a hard-wearing surface while allowing the natural character of the timber to remain visible. ## Water-Based Formula Bona Domo is a **water-based floor lacquer**, making it a practical alternative to traditional solvent-based floor finishes. Water-based lacquers are widely appreciated for their convenient application characteristics and lower odour compared with many solvent-based alternatives. The water-based formulation makes Bona Domo particularly suitable for indoor flooring projects where maintaining a comfortable working environment is important. It can be used in homes, offices and other interior spaces where a suitable wood floor finish is required. As with any floor lacquer, the surface should be correctly prepared before application. The timber should be clean, dry and free from dust, grease, wax and other contaminants. Proper preparation is an important part of achieving a smooth, attractive and long-lasting result. ## Durable Protection for Wooden Floors Wood flooring is naturally strong and attractive, but it is constantly exposed to foot traffic, dirt and everyday wear. Without suitable protection, the surface can gradually become scratched, marked or worn. Bona Domo Floor Lacquer creates a protective surface over the timber, helping to reduce the effects of normal daily use. This makes it a useful choice for areas where wooden floors need protection while retaining their natural appearance. The finished surface provides a practical barrier against everyday dirt and wear, helping the floor remain easier to clean and maintain as part of a regular floor care routine. For busy areas, applying the lacquer correctly and allowing adequate drying and curing time is particularly important. Following the recommended application system helps ensure the finished floor achieves the intended level of performance. ## Enhances the Natural Appearance of Timber One of the most appealing features of wooden flooring is its natural grain and character. A suitable lacquer should protect the timber without unnecessarily hiding these qualities. Bona Domo provides a clear finish that allows the natural appearance of the wood to remain visible. Once applied, the lacquer can help enhance the overall appearance of the floor while providing a consistent protective surface. The final appearance will naturally depend on the type and colour of timber, its preparation and the number of coats applied. Different wood species can react differently to floor finishes, so testing the complete system on a small area before beginning a larger project can be beneficial. ## Suitable for New and Renovated Floors Bona Domo can be used as part of a complete wooden floor finishing system. It is suitable for finishing newly prepared timber floors and can also be used when renovating an existing wooden floor, provided the existing surface is correctly prepared. For new floors, the lacquer can help protect freshly installed timber from the start of its service life. For renovation projects, it can form part of a process designed to refresh and improve the appearance of an existing floor. The condition of an existing floor should always be assessed before application. Old finishes, contamination, damaged areas and previous treatments may need to be removed or treated appropriately to ensure good adhesion and a satisfactory final result. ## Professional-Quality Floor Finishing Bona is a well-established name in wood floor care and finishing, and Bona Domo is designed to provide a dependable solution for users looking to achieve a quality lacquered finish. It is suitable for flooring professionals, contractors, maintenance teams and experienced DIY users who require a dedicated wood floor lacquer. Its straightforward water-based formulation makes it a practical product to incorporate into a professional floor finishing system. For contractors, using a reliable lacquer can help create a consistent finish across different flooring projects. Correct preparation, application equipment and technique remain essential for achieving the best possible result. ## Easy-to-Maintain Lacquered Flooring Once a wooden floor has been lacquered, maintaining a suitable cleaning routine is important for protecting its appearance. Regular removal of dust, grit and dirt helps prevent abrasive particles from being walked across the surface and causing unnecessary wear. Routine cleaning should be carried out using products suitable for lacquered wooden floors. Avoid excessive water and unsuitable household cleaning chemicals, as these can affect the appearance or performance of a wood floor finish. Using the correct maintenance products alongside Bona Domo can help extend the attractive appearance of the finished floor and reduce the need for more intensive restoration. ## A Practical Choice for Interior Flooring Bona Domo is suitable for a variety of interior applications where a durable, water-based wood floor lacquer is required. Wooden floors in homes can benefit from the protective qualities of a lacquered surface, while offices and other suitable commercial interiors can also benefit from a finish designed to cope with regular foot traffic. It can be used on a range of timber flooring projects, making it a versatile product for professional floor finishing and renovation work. Whether the aim is to protect a newly installed floor or give an existing timber floor a fresh, clean appearance, Bona Domo provides a practical finishing option. ## Application and Preparation Achieving the best possible result starts before the lacquer is applied. Wooden floors should be sanded and prepared correctly, with the surface thoroughly cleaned and free from dust and contaminants. The lacquer should then be applied evenly using appropriate flooring equipment and according to the recommended application procedure. Avoid applying excessively thick coats, as this can affect drying and the final appearance. Adequate drying time should be allowed between coats. The floor should also be protected from heavy traffic until the finish has sufficiently cured. Furniture, rugs and other items should not be returned too quickly, as doing so may interfere with the curing process. Always follow the product instructions for application, drying times, coverage and recommended maintenance. ## Why Choose Bona Domo Floor Lacquer? Bona Domo offers a combination of **water-based convenience, reliable protection and an attractive clear finish**, making it an excellent option for wooden floor finishing projects. It helps protect timber from everyday wear while allowing the natural grain and character of the wood to remain visible. Its water-based formulation is well suited to interior applications, while its versatility makes it useful for both new flooring and renovation projects. For homeowners, flooring contractors and professional maintenance teams, Bona Domo provides a dependable way to create a clean, durable and attractive lacquered finish. ## Protect Your Wooden Floor with Bona Domo Give your timber flooring the protection it needs with **Bona Domo Floor Lacquer**. Designed specifically for interior wooden floors, this water-based lacquer provides a practical protective finish while enhancing the natural appearance of the timber. With the correct preparation, application and ongoing maintenance, Bona Domo can help your wooden floor remain attractive and protected against everyday use for longer. Whether you are completing a new flooring installation, renovating an existing timber floor or looking for a dependable water-based lacquer for professional projects, **Bona Domo Floor Lacquer** is a versatile choice for achieving a quality, long-lasting wood floor finish.

3 # Bona Craft Oil 2K | 1.25L Coloured Hardwax Oil for Wood Floors Give wooden floors a beautiful, natural finish with **Bona Craft Oil 2K 1.25L**, a fast-drying, durable oil designed to enhance and protect a wide variety of wood types. Combining the rich appearance of a traditional wood oil with the convenience of a two-component formulation, Bona Craft Oil 2K is an excellent choice for creating attractive, hard-wearing timber floors with a distinctive contemporary appearance. Available in a selection of carefully chosen colours, Bona Craft Oil 2K allows you to change or enhance the character of a wooden floor while retaining the natural beauty and texture of the timber. Whether you are looking for a subtle neutral finish or a more distinctive grey, graphite or umbra tone, the range provides plenty of options for achieving the appearance you want. ## Fast-Drying Two-Component Wood Oil Bona Craft Oil 2K is formulated as a two-component product, making it a practical option for professional floor finishing projects where durability and efficient application are important. The fast-drying formulation helps reduce waiting time during the finishing process, allowing flooring projects to progress efficiently. The oil penetrates into the wood to enhance its natural appearance, helping to bring out the grain and character of the timber. Unlike finishes that can completely mask the natural appearance of wood, an oil finish allows the underlying texture and beauty of the floor to remain an important part of the finished result. Its durable formulation makes Bona Craft Oil 2K suitable for a variety of wooden flooring applications, making it a versatile product for both renovation and new flooring projects. ## Create a Distinctive Look One of the biggest advantages of Bona Craft Oil 2K is the choice of colours available. The range includes **Old Grey, Sand, Graphite, Light Grey, Ash, Umbra, Clay, Frost and Neutral**, giving you the flexibility to create anything from a warm, understated appearance to a modern, sophisticated finish. The different shades can dramatically influence the overall appearance of a room. Neutral and lighter colours can help create a bright, contemporary feel, while deeper shades such as Graphite or Umbra can add character and definition to the floor. Old Grey, Light Grey and Ash are ideal options for creating a stylish, modern appearance, while Sand and Clay offer warmer alternatives. Because every wooden floor has its own natural grain, colour and character, the finished appearance can vary depending on the species and condition of the timber. This makes Bona Craft Oil 2K a useful choice for projects where the final appearance needs to complement the existing interior design. ## Enhances the Natural Beauty of Wood Wood flooring is valued for its natural character, and the right finish can make a significant difference to its appearance. Bona Craft Oil 2K is designed to enhance the natural qualities of timber while providing a durable protective finish. The oil works with the wood rather than simply covering it, helping the grain remain visible and allowing the natural character of the floor to contribute to the overall look. This makes it particularly suitable for anyone who wants a floor with a natural, sophisticated appearance rather than a heavily coated finish. The result is a floor that can become an important feature of a room, combining the warmth and character of real wood with the chosen colour of the Craft Oil finish. ## Use Alone or With Bona Traffic HD Bona Craft Oil 2K can be used as a standalone finish or combined with **Bona Traffic HD lacquer** when an additional level of protection and a different final appearance is required. Using the oil on its own provides a natural-looking oiled finish, while combining it with Bona Traffic HD can provide added gloss and make ongoing maintenance easier. This flexibility means the product can be incorporated into different flooring systems depending on the requirements of the project. For professional flooring contractors, this provides greater control over the final appearance and maintenance characteristics of the completed floor. ## Suitable for Professional Floor Finishing Bona Craft Oil 2K is a professional-grade flooring product designed for use as part of a quality wood floor finishing system. Its combination of colour, durability and fast drying makes it suitable for flooring professionals working on residential and commercial projects. It can be used when renovating existing wooden floors or finishing newly prepared timber flooring. By selecting the appropriate colour, flooring professionals can create a finish that complements the timber itself as well as the surrounding room. As with any wood floor finishing product, the floor should be properly prepared before application. The timber should be clean, dry and appropriately prepared so that the oil can be applied evenly and achieve the best possible result. Always follow the manufacturer's application instructions and recommended drying times. ## Easy Maintenance and Long-Lasting Appeal A wooden floor needs regular care to retain its appearance, particularly in areas that experience frequent foot traffic. Bona Craft Oil 2K provides a durable finish designed to help wooden floors maintain their attractive appearance over time. The finished floor can be incorporated into a suitable cleaning and maintenance routine to help preserve the appearance of the timber. Regular cleaning helps remove everyday dirt and debris before it can build up, while appropriate maintenance products can help keep the floor looking its best. For floors finished using an oil and lacquer combination, maintenance can be particularly convenient, helping flooring remain attractive and easier to care for over its service life. ## A Versatile Choice for Different Wood Types Bona Craft Oil 2K is suitable for various wood types, making it a versatile addition to a professional flooring toolkit. Different species of timber naturally respond differently to colour and oil, so the selected shade can produce a unique result on each floor. This flexibility makes the product useful for a wide range of interior projects, from traditional timber floors that need refreshing to modern flooring installations where a particular colour is required. The range of available shades also means there is no need to settle for a single standard finish. Instead, the colour can be selected to suit the desired style of the room and the natural appearance of the timber. ## Why Choose Bona Craft Oil 2K? Bona Craft Oil 2K combines several important qualities in one wood floor finishing product. It is **fast drying, durable, available in multiple colours and suitable for various wood types**. It can also be used independently or alongside Bona Traffic HD lacquer, giving you flexibility when choosing the desired appearance and maintenance requirements. The 1.25L pack provides a practical size for professional flooring projects, while the choice of nine Craft Stain colours makes it possible to create a wide range of finishes. Whether you are a professional floor installer, flooring contractor or experienced DIY user working on a suitable wooden flooring project, Bona Craft Oil 2K provides a versatile way to add colour while enhancing the natural character of timber. ## Choose Your Bona Craft Oil 2K Colour Transform the appearance of your wooden floor with Bona Craft Oil 2K. Choose from **Old Grey, Sand, Graphite, Light Grey, Ash, Umbra, Clay, Frost or Neutral** to create a finish that suits your project. With its fast-drying formulation, durable performance and natural-looking finish, Bona Craft Oil 2K is an excellent option for anyone looking to combine attractive colour with quality wood floor finishing. For additional protection and easier maintenance, it can also be used with Bona Traffic HD lacquer. Choose the colour that best suits your timber and interior, prepare the floor correctly, and create a distinctive, durable finish that allows the natural beauty of the wood to remain at the heart of the finished floor.

3 Bona Oiled Wood Floor Refresher 1L Fast-Drying Maintenance Treatment for Oiled Wood Floors The **Bona Oiled Wood Floor Refresher 1L** is a ready-to-use, fast-drying maintenance product specially developed to restore and protect oiled wooden floors. Designed to make routine floor maintenance simple and effective, this professional-quality refresher helps revive dry-looking timber, restore the natural appearance of oiled floors and provide an additional protective layer against everyday wear. Oiled wood floors offer a beautiful, natural appearance, but they require regular maintenance to keep the timber nourished and protected. Over time, foot traffic, cleaning, furniture movement and exposure to spills can leave an oiled floor looking dry, dull or tired. Bona Oiled Wood Floor Refresher provides a convenient way to refresh the existing surface without the need for machine buffing or complicated refinishing procedures. Bona describes the product as ready to use, fast drying and environmentally sound, with light foot traffic possible after approximately 12 hours under normal conditions. Restore the Natural Beauty of Oiled Wood Regular maintenance is essential for keeping an oiled timber floor looking its best. Unlike lacquered floors, where the protective coating sits primarily on top of the wood, oil treatments penetrate the timber and help protect the surface from within. As the floor is used, the oil protection can gradually become depleted, particularly in busy areas. Bona Oiled Wood Floor Refresher helps replenish the appearance and protection of an existing oiled surface. It is particularly useful for floors that are beginning to look dry but are not yet in need of complete re-oiling or sanding. The result is a refreshed floor with a smooth, natural-looking **matt appearance**, helping preserve the character of the original timber without creating an unwanted glossy finish. Contains Linseed Oil Bona Oiled Wood Floor Refresher contains **linseed oil**, combined with a polyurethane dispersion, to help nourish and protect the existing oiled wood surface. This formulation is designed to restore the lustre of dry-looking oiled floors while improving resistance to everyday water and spills. This makes it particularly suitable for timber floors in areas where maintaining both appearance and practical protection is important. Helps Improve Resistance to Water and Spills Oiled wooden floors can be vulnerable to moisture if the protective treatment becomes worn or depleted. Bona Oiled Wood Floor Refresher helps improve the floor's resistance to water and spills, providing additional protection as part of a regular maintenance programme. This makes it particularly useful in areas such as: * Hallways * Living rooms * Dining rooms * Kitchens * Offices * Reception areas * Retail spaces * Hotels * Restaurants * Commercial buildings Promptly cleaning up spills remains important, but maintaining the protective surface can help reduce the impact of everyday moisture exposure. Maintains a Natural Matt Finish One of the main benefits of Bona Oiled Wood Floor Refresher is its ability to maintain the characteristic **matt appearance of oiled wood**. Many floor maintenance products can leave behind an artificial-looking shine. Bona's refresher is specifically designed to avoid this overglazed appearance, helping retain the natural, understated look associated with quality oiled timber flooring. This makes it an excellent choice for modern interiors where the texture, grain and natural character of the wood are intended to remain visible. Helps Revive Dry and Worn Areas Everyday traffic does not affect every part of a floor equally. Hallways, entrances and areas around desks or kitchen workspaces can experience significantly more wear than quieter parts of a room. Bona Oiled Wood Floor Refresher can help improve the appearance of: * Light scratches * Dull patches * Dry-looking timber * Minor surface imperfections * Areas affected by traffic wear * Uneven-looking areas of an otherwise healthy oiled floor Regular maintenance can help prevent the surface from becoming excessively dry and reduce the need for more intensive restoration work. Severely dry or damaged oiled floors may, however, require re-oiling before this product is used. Ready-to-Use Formula Bona Oiled Wood Floor Refresher is supplied ready to use, so there is no need to dilute or mix the product before application. Simply apply the refresher to a properly cleaned and completely dry floor, distribute it evenly and allow it to dry. The product should **not be diluted**. Its straightforward application makes it suitable for professional floor care contractors as well as homeowners who want to maintain their own oiled wooden flooring. No Machine Buffing Required A major advantage of Bona Oiled Wood Floor Refresher is that it does not require specialist polishing machinery. The product can be applied using a **Bona Microfiber Cleaning Pad or suitable Bona Applicator Pad**, allowing the refresher to be spread evenly across the floor by hand. This makes the maintenance process considerably simpler than traditional oil-based systems that may require a floor buffer and specialist pads. Fast Drying Performance Bona Oiled Wood Floor Refresher is designed to minimise downtime during floor maintenance. Under normal conditions of approximately 20C and 60% relative humidity: * Touch dry: approximately **2040 minutes** * Light foot traffic: approximately **12 hours** * Between coats: approximately **2 hours** Very dry surfaces may require a second coat, with approximately two hours allowed between applications. Good airflow during drying is recommended. Avoid heavy traffic and replacing furniture or rugs during the initial drying period. Excellent Coverage One litre of Bona Oiled Wood Floor Refresher provides approximately **4060m of coverage**, depending on the condition and absorbency of the floor and the application technique used. This makes the 1L container suitable for refreshing substantial areas of residential or commercial flooring. How to Apply Bona Oiled Wood Floor Refresher Correct preparation is essential for achieving an attractive, even result. 1. Clean the Floor Thoroughly Remove loose dirt and grit before cleaning the floor thoroughly with a suitable Bona cleaner for oiled wood. Allow the floor to dry completely before applying the refresher. The surface must be spotless because dirt left behind can become sealed into the refresher and result in an uneven or unattractive appearance. 2. Shake the Product Shake the bottle thoroughly before use and apply at normal room temperature, ideally between **18C and 25C**. Avoid strong draughts and direct sunlight during application and drying. 3. Apply Thinly Pour the refresher onto a manageable section of the floor and distribute it thinly using a Bona Microfiber Cleaning Pad. Where possible, work in the direction of the wood grain. Continue section by section until the entire floor has been treated. 4. Allow to Dry Allow the floor to dry thoroughly before normal use. Ensure good airflow throughout the drying process. Important Surface Compatibility Bona Oiled Wood Floor Refresher is intended for suitable **oiled wood floors**. It should not be applied over floors previously treated with wax or hardwax oil, as wax residues can prevent the product from adhering correctly. If you are uncertain about the existing floor treatment, test the product on a small, inconspicuous area first. Severely damaged floors may require professional restoration or re-oiling rather than a simple refresher treatment. Ideal for Residential and Commercial Flooring The versatility and straightforward application of Bona Oiled Wood Floor Refresher make it suitable for a wide variety of environments, including: * Homes * Apartments * Offices * Hotels * Restaurants * Retail premises * Reception areas * Showrooms * Schools * Commercial buildings * Property maintenance projects It is particularly useful in high-traffic areas where regular maintenance is necessary to preserve the appearance and protection of oiled timber. Environmentally Sound and GREENGUARD Certified Bona describes the product as environmentally sound, and its technical documentation lists **GREENGUARD certification**. The product is also classified as non-hazardous under the referenced European CLP safety documentation. Key Features * Ready-to-use oiled wood floor refresher * 1 litre size * Designed specifically for oiled wood floors * Contains linseed oil * Helps restore dry-looking timber * Retains a natural matt appearance * Improves resistance to water and spills * Helps revive dull patches and light surface wear * Fast drying * No machine buffing required * Approximate coverage of 4060m per litre * Light foot traffic possible after approximately 12 hours * Suitable for residential and commercial use * GREENGUARD certified * Ready to use do not dilute Why Choose Bona Oiled Wood Floor Refresher 1L? The **Bona Oiled Wood Floor Refresher 1L** provides a simple and effective way to maintain the beauty and protection of oiled wooden floors. Its ready-to-use formulation, fast drying performance and easy application make it possible to refresh tired-looking timber without specialist machinery or complicated refinishing procedures. By helping restore dry areas, improve resistance to water and spills and maintain the natural matt appearance of oiled wood, it is an excellent choice for routine floor maintenance. Regular use on suitable, properly cleaned surfaces can help preserve the appearance of the timber and extend the life of the existing oil treatment. Whether you're maintaining an oiled wood floor at home or looking after timber flooring in a busy commercial environment, Bona Oiled Wood Floor Refresher offers professional-quality maintenance in a convenient 1L format. It is a practical addition to any specialist wood floor care programme and an ideal solution for keeping oiled floors looking naturally beautiful, smooth and well protected.

3 Bona Wood Floor Polish Matt Low-Gloss Protective Polish for Lacquered Wood Floors The **Bona Wood Floor Polish Matt** is a professional-quality, ready-to-use floor maintenance polish designed to refresh the appearance of lacquered wooden floors while providing an additional layer of protection against everyday wear. Its durable urethane-acrylic formulation helps fill fine micro-scratches and imperfections, improving the overall appearance of the floor while leaving behind a natural-looking, low-gloss matt finish. Unlike a high-gloss floor polish, Bona Wood Floor Polish Matt is designed to maintain the understated appearance of a matt or low-sheen wooden floor. It is an excellent choice when you want to revive a tired-looking floor without creating an overly shiny or reflective surface. Bona recommends using the polish periodically according to the level of foot traffic, generally every **14 months**, to help keep floors looking refreshed and protected. Restore the Appearance of Tired Wooden Floors Even well-maintained wooden floors can gradually lose their original appearance. Everyday foot traffic, furniture movement, dirt and general use can leave behind fine scratches and scuff marks that make the surface look dull or worn. Bona Wood Floor Polish Matt provides a convenient way to refresh compatible floors without undertaking a full sanding or refinishing process. The polish creates a protective maintenance layer that helps improve the appearance of the surface while restoring a subtle matt sheen. It is particularly useful when a floor is structurally sound but simply needs a little extra care to bring back its fresh, well-maintained appearance. Durable Urethane-Acrylic Protection The polish uses a durable **acrylic/polyurethane binding system** to create a protective layer over the existing lacquered floor finish. This additional layer helps protect the surface against everyday wear while improving its overall appearance. The protective coating can be especially beneficial in areas that receive regular foot traffic. Applying floor polish as part of a routine maintenance programme can help floors remain attractive between more intensive restoration treatments. Matt Finish for a Natural Appearance One of the main advantages of Bona Wood Floor Polish Matt is its **low-gloss finish**. Many floor polishes are designed to create a strong shine, but this is not always desirable. A matt finish can provide a more contemporary and natural appearance while still giving the floor the benefits of a protective maintenance coating. Bona's matt formulation is ideal for maintaining the understated appearance of modern wooden floors, allowing the natural character of the timber to remain the focus. For customers who prefer a noticeable shine, Bona also produces a gloss version. Helps Fill Micro-Scratches Fine scratches can accumulate over time and make a wooden floor look older than it actually is. Bona Wood Floor Polish Matt helps fill micro-scratches in the existing finish, creating a more even-looking surface. This makes it particularly useful for floors affected by light everyday wear, including marks caused by normal foot traffic and furniture use. Bona also recommends its Wood Floor Polish for addressing smaller micro-scratches on lacquered floors. It is important to note that the product is intended for minor surface imperfections rather than deep scratches or significant damage. Floors with substantial wear or deep scratches may require sanding and professional refinishing. Suitable for Unwaxed, Polyurethane-Finished Wood Floors Bona Wood Floor Polish Matt is suitable for **unwaxed wood floors finished with polyurethane**. It is designed to work as a maintenance coating over a compatible existing finish. It should **not be used on waxed or oiled floors**, as wax and oil can prevent the polish from adhering correctly to the surface. If you are unsure about the existing floor finish, Bona recommends testing a small, inconspicuous area before treating the entire floor. Ready-to-Use Formula Bona Wood Floor Polish Matt is supplied ready to use, meaning there is no need to dilute or mix the product before application. This makes the polishing process straightforward and convenient for both professional cleaners and homeowners. The product should be applied undiluted using a suitable Bona Applicator Pad. Its ready-to-use formulation helps simplify preparation and reduces the possibility of incorrect dilution affecting the final result. Excellent Coverage One litre of Bona Wood Floor Polish Matt provides coverage of approximately **50m**, making it suitable for maintaining substantial floor areas from a relatively small quantity of product. Actual coverage can vary depending on the condition and texture of the floor, the application technique and how evenly the product is distributed. Applying the polish in thin, even sections helps achieve a consistent appearance across the entire floor. Fast Drying Bona Wood Floor Polish Matt has been formulated to dry quickly, helping minimise disruption during floor maintenance. Under recommended conditions, the polish is **touch dry within approximately 3060 minutes**, while additional coats can be applied after a minimum of **2 hours**. Drying times can be affected by room temperature, humidity, ventilation and the amount of product applied, so sufficient drying time should always be allowed before normal use. Easy Application Applying Bona Wood Floor Polish Matt is straightforward when the manufacturer's recommended procedure is followed. Step 1 Clean the Floor Remove loose dirt and grit before polishing. Thoroughly clean the wooden floor using a suitable wood floor cleaner and allow it to dry completely. A clean surface is essential for achieving good adhesion and an even finish. Step 2 Prepare the Polish Shake the bottle thoroughly before use. Apply the product at normal room temperature, ideally between **18C and 25C**. Step 3 Apply to the Floor Pour a wide line of polish onto a manageable section of the floor. Spread it evenly using a Bona Applicator Pad, working in the direction of the wood grain. Step 4 Continue Section by Section Work systematically across the floor, smoothing each section to ensure an even coating. Avoid creating puddles or applying unnecessarily thick layers. Allow the product to dry fully before returning the floor to normal use or applying another coat. No Buffing Required An important advantage of Bona Wood Floor Polish Matt is that it **does not require buffing after application**. The product is designed to be applied and left to dry naturally. In fact, Bona advises against buffing the matt polish, as buffing can make the finish appear shinier and may result in an uneven or patchy appearance. This makes the product particularly convenient for routine maintenance where a professional-looking matt finish is required without additional polishing machinery. Ideal for Homes and Professional Floor Care Bona Wood Floor Polish Matt is suitable for a wide variety of residential and professional environments. Typical applications include: * Houses * Apartments * Offices * Hotels * Reception areas * Restaurants * Retail premises * Schools * Community buildings * Property management projects * Professional cleaning contracts Its combination of simple application, broad coverage and protective performance makes it a useful addition to both domestic and commercial floor-care programmes. Recommended Routine Maintenance Regular maintenance helps protect the appearance of a lacquered wooden floor. Bona recommends using Wood Floor Polish periodically, with the appropriate frequency depending on how heavily the floor is used. For many floors, this can be every **14 months**. High-traffic areas may require more frequent maintenance, while lightly used residential rooms may need polishing less often. Always clean the floor thoroughly before reapplying polish. GREENGUARD Certified Bona Wood Floor Polish Matt is **GREENGUARD certified**, providing an additional product credential for environments where indoor air quality is an important consideration. Key Features * Professional-quality wood floor polish * Matt, low-gloss finish * Suitable for lacquered wood floors * Durable urethane-acrylic formulation * Adds a protective maintenance layer * Helps fill micro-scratches * Restores the appearance of dull floors * Ready to use no dilution required * Approximate coverage of 50m per litre * Touch dry in approximately 3060 minutes * Minimum 2-hour recoating time * No buffing required * Suitable for unwaxed, polyurethane-finished wood floors * GREENGUARD certified * Ideal for residential and commercial floor maintenance Important Usage Information Bona Wood Floor Polish Matt should only be applied to compatible flooring. It is **not suitable for waxed or oiled wooden floors**, as these surfaces may prevent proper adhesion. Always test the product on a small, inconspicuous area if you are uncertain about the existing finish. The floor should also be thoroughly cleaned and completely dry before polishing. Do not dilute the product, and do not buff the finished surface. Why Choose Bona Wood Floor Polish Matt? The **Bona Wood Floor Polish Matt** provides an easy and effective way to maintain the appearance of lacquered wooden floors without creating an unwanted high-shine finish. Its durable urethane-acrylic formulation adds a protective layer, helps fill micro-scratches and restores a subtle matt sheen to floors that have become tired or dull through everyday use. With approximately **50m of coverage per litre**, a ready-to-use formulation, fast drying time and no requirement for buffing, it is a convenient solution for routine wood floor maintenance. Whether you're looking after a wooden floor at home or maintaining flooring across a busy commercial property, Bona Wood Floor Polish Matt provides reliable protection and a natural-looking finish that helps keep compatible floors looking their best for longer.

3 Bona Polish Remover Powerful Concentrated Floor Polish & Sealant Remover The **Bona Polish Remover** is a powerful, concentrated floor stripper designed to remove accumulated polish, maintenance coatings and scuff marks from a wide range of water-resistant flooring surfaces. Developed by Bona for professional floor care, this effective polish removal solution provides an efficient way to prepare floors for a fresh application of polish or floor refresher. Regularly polished floors can develop layers of maintenance product over time. While polish is designed to protect and enhance flooring, repeated applications can eventually result in unwanted build-up, dullness or an uneven appearance. Bona Polish Remover helps tackle this build-up, allowing the old coating to be removed so the floor can be thoroughly cleaned and prepared for its next treatment. Suitable for compatible **wood, vinyl, linoleum, tile and marble floors**, this concentrated formula is an excellent choice for professional cleaners, facilities managers, floor maintenance contractors and domestic users looking for an effective floor polish stripper. Powerful Concentrated Formula Bona Polish Remover is supplied as a concentrated solution, allowing it to be diluted with clean water before use. According to Bona's technical data, the recommended dilution is **1 litre of concentrate to 5 litres of clean water**. This concentrated format makes the product economical to use, particularly when treating larger floors or commercial premises. The solution can be prepared according to the level of polish build-up and the requirements of the floor maintenance project. The product is designed to dissolve accumulated polish and maintenance coatings, making them easier to remove mechanically with a suitable brush or scouring pad. Removes Built-Up Floor Polish Repeated applications of floor polish can eventually leave several layers of coating on a floor. Bona Polish Remover is specifically designed to tackle this build-up. Cleanfast describes the product as capable of removing **up to three coats of polish**, making it a practical solution when floors require a deeper maintenance treatment rather than another layer of polish. Removing old polish allows the underlying floor to be properly cleaned before a new maintenance coating is applied. This can help achieve a more consistent appearance and prevent old, deteriorated layers from affecting the finish of a new application. Effective on Scuff Marks In addition to removing polish, Bona's technical information confirms that the product can also be effective for removing **scuff marks**. ([Bona][3]) Scuffs can develop through everyday foot traffic, furniture movement, footwear and other routine activities. On busy floors, these marks can make otherwise clean surfaces appear worn. Using an appropriate polish removal treatment can help restore a cleaner-looking surface before the floor receives its next maintenance treatment. ## Suitable for Multiple Flooring Types One of the main benefits of Bona Polish Remover is its versatility. The product is designed for use on suitable water-resistant flooring, making it useful across a range of domestic and commercial environments. Suitable flooring applications include: * Varnished wooden floors * Vinyl flooring * PVC flooring * Linoleum * Ceramic and other suitable tiles * Marble * Other compatible water-resistant floors Bona specifically describes the product as suitable for water-resistant flooring and notes that it is adapted for wood while also being suitable for many tile, vinyl and linoleum surfaces. Always check the manufacturer's care instructions for the specific floor before use and test the product in an inconspicuous area. ## Ideal for Professional Floor Maintenance Bona Polish Remover is particularly useful for professional cleaning and floor maintenance applications where floors need to be periodically stripped before being refinished. It can be used in: * Offices * Retail premises * Hotels * Restaurants * Schools * Commercial buildings * Healthcare environments * Community centres * Residential properties * Property management facilities * Professional cleaning contracts Its concentrated formulation and broad surface compatibility make it a practical product for cleaning companies and facilities teams responsible for maintaining multiple floors. Water-Based Formulation Bona Polish Remover is a **water-based** floor polish removal product. It is designed to provide effective removal of accumulated maintenance coatings without relying on a solvent-heavy formulation. Bona also describes the product as having a non-offensive odour. The formulation makes it suitable for use as part of a controlled floor maintenance process where old polish needs to be removed before the application of a new protective treatment. Low-Foaming Performance Bona's technical information describes the remover as having a **low-foaming formulation**. Low foaming can be particularly beneficial during floor stripping because excessive foam can make it more difficult to see and work the solution into the floor surface. A controlled solution allows the operator to concentrate on loosening and removing the old coating efficiently. Simple Application Process Bona Polish Remover is straightforward to use when the manufacturer's recommended procedure is followed. Step 1 Prepare the Floor Remove loose dirt and grit from the floor before applying the stripping solution. Ensure the floor is in sound condition and that any protective seal is intact. Bona specifically warns against allowing the remover to enter open gaps in wooden flooring, as this may cause permanent staining. Step 2 Dilute the Concentrate Dilute **1 litre of Bona Polish Remover with 5 litres of clean water** in a suitable bucket. Prepare a second bucket containing clean water for rinsing. Step 3 Apply to a Small Area Work in manageable sections. Apply the diluted solution to a small section of flooring and allow it to work for approximately **five minutes**, giving the product time to dissolve the accumulated polish. Step 4 Agitate the Surface Scrub the treated section using a hard-bristled brush or suitable scouring pad. This helps loosen the softened polish and maintenance coating. Step 5 Remove the Residue Wipe away the dissolved material using a mop and clean water. Continue working section by section until the entire floor has been treated, replacing the rinse water frequently. Step 6 Final Rinse Once the polish has been removed, rinse the floor once more using clean water. All traces of Bona Polish Remover should be removed before applying a new coat of polish or refresher. Use Water Carefully on Wooden Floors Although Bona Polish Remover is suitable for varnished wooden floors, extra care should be taken when working with wood. Bona recommends using water restrictively on wooden floors during the stripping process. The condition and integrity of the existing floor seal should always be assessed before treatment. Floors with damaged finishes, open joints or unsuitable coatings may require specialist assessment before a stripping product is used. Helps Prepare Floors for a Fresh Finish One of the main reasons for using a polish remover is to create a clean, suitable foundation for the next stage of floor maintenance. Once old polish and residue have been completely removed, the floor can be thoroughly rinsed and allowed to dry before a compatible polish or refresher is applied. Removing old layers first helps avoid trapping dirt or incompatible residues beneath the new maintenance coating. Key Features * Powerful concentrated floor polish remover * Designed to remove accumulated polish and maintenance coatings * Can remove up to three coats of polish * Effective against scuff marks * Water-based formulation * Low-foaming performance * Non-offensive odour * Suitable for compatible varnished wooden floors * Suitable for vinyl and PVC * Suitable for linoleum * Suitable for suitable tile and marble surfaces * Approximate coverage of 70m per litre of concentrate * Dilutes at 1:5 with clean water * Ideal for professional and domestic floor maintenance * Suitable for preparing floors before fresh polish application Why Choose Bona Polish Remover? The **Bona Polish Remover** provides an efficient solution for floors affected by accumulated polish, maintenance coatings and scuff marks. Its concentrated, water-based formulation offers excellent economy while its versatility makes it suitable for a range of compatible flooring surfaces. Whether you're maintaining a busy commercial building, refreshing a residential floor or preparing a surface for a new coat of Bona polish, this professional floor stripper helps remove old product build-up so the floor can be properly cleaned and prepared. For professional cleaners and floor maintenance specialists, Bona Polish Remover is a dependable addition to a complete floor care system. Used correctly, it provides an effective way to strip away unwanted polish build-up and restore a clean foundation for the next stage of floor maintenance.

3 Bona Hard Surface Floor Polish High Gloss Protective Polish for Hard Floors The **Bona Hard Surface Floor Polish** is a professional-quality floor polish designed to restore the shine and appearance of sealed hard-surface floors while providing a durable protective layer against everyday wear. Its advanced urethane acrylic formulation helps fill fine micro-scratches and scuffs, evening out the appearance of tired or dull flooring and leaving behind a smooth, attractive high-gloss finish. Suitable for a wide range of sealed hard floors, including laminate, vinyl, LVT, linoleum, stone, ceramic tile and other compatible surfaces, Bona Hard Surface Floor Polish is an excellent choice for refreshing floors in homes, offices, retail premises, hospitality environments and other areas where attractive, well-maintained flooring is important. Whether you're looking to restore a tired-looking floor, improve its visual appearance or provide an additional layer of protection against everyday traffic, Bona Hard Surface Floor Polish offers a convenient and professional solution. Professional High-Gloss Floor Polish Floors can gradually lose their original appearance through regular foot traffic, furniture movement, cleaning and general daily use. Even when a floor is thoroughly cleaned, fine scratches and scuffs can leave the surface looking dull and uneven. Bona Hard Surface Floor Polish is designed specifically to address this problem. Its high-gloss formulation restores shine while helping to create a more uniform appearance across the floor. The durable protective coating helps refresh worn-looking surfaces and gives compatible hard floors a cleaner, brighter and more polished appearance. Durable Urethane Acrylic Protection The polish combines acrylic and polyurethane technology to create a durable protective layer over the existing sealed floor surface. This coating helps protect against everyday wear while reducing the visual impact of minor scratches and scuff marks. The protective layer can help extend the refreshed appearance of the floor between maintenance treatments, making it particularly useful in areas that experience regular foot traffic. For commercial premises, this added protection can be especially useful in areas where floors need to maintain a professional appearance throughout the working day. Helps Fill Micro-Scratches One of the key benefits of Bona Hard Surface Floor Polish is its ability to fill micro-scratches and help even out the appearance of the floor. Fine scratches and scuffs can make an otherwise clean floor appear worn. Applying the polish creates a smoother-looking surface that helps minimise the visual effect of these small imperfections. The result is a more consistent appearance with a renewed high-gloss finish. Suitable for a Wide Range of Hard Floors Bona Hard Surface Floor Polish is formulated for use on a variety of sealed hard flooring materials. Suitable applications include: * Laminate flooring * Vinyl flooring * Luxury vinyl tile (LVT) * Linoleum * Ceramic tiles * Quarry tiles * Stone flooring * Terrazzo * Sealed porous marble * Other compatible sealed hard surfaces This versatility makes it a useful product for both domestic and professional floor maintenance. Always check that the existing floor finish is compatible and carry out a small test area before treating the complete floor. Ideal for Residential and Commercial Environments Bona Hard Surface Floor Polish can be used in a variety of indoor environments where sealed hard flooring requires regular maintenance. It is suitable for: * Homes * Apartments * Offices * Retail stores * Hotels * Restaurants * Cafs * Reception areas * Showrooms * Schools * Community buildings * Commercial premises Its combination of attractive appearance and protective performance makes it particularly useful wherever flooring needs to look clean, polished and professionally maintained. High-Gloss Finish If you want a floor with a noticeable shine, Bona Hard Surface Floor Polish provides a high-gloss finish designed to bring light and brightness back to dull-looking surfaces. The polished appearance can transform tired floors without the need for replacement, making it an economical way to refresh compatible flooring. The high-gloss finish is particularly effective in formal areas, reception spaces, showrooms and commercial environments where presentation is important. Excellent Coverage Bona Hard Surface Floor Polish offers an approximate coverage rate of **50m per litre**, allowing one litre of product to cover a substantial floor area when applied according to the manufacturer's recommendations. Actual coverage can vary depending on the porosity, texture, condition and preparation of the floor, as well as the application method used. Fast Drying The polish has been formulated to dry relatively quickly, helping minimise disruption during floor maintenance. Under recommended conditions, the product is touch dry in approximately **3060 minutes**, with a minimum recoating time of approximately **2 hours**. Always allow the appropriate drying time before applying additional coats or returning the floor to normal use. Simple Application Bona Hard Surface Floor Polish is straightforward to apply when the correct preparation and application procedure is followed. Before polishing, the floor should be thoroughly cleaned and allowed to dry completely. Existing polish or heavy build-up should be removed where necessary to provide a suitable surface for the new treatment. For application: 1. Thoroughly clean the floor and remove dirt, grease and residue. 2. Ensure the surface is completely dry. 3. Check the floor for compatibility and test a small inconspicuous area. 4. Apply Bona Hard Surface Floor Polish using a suitable Bona Microfiber Applicator Pad. 5. Spread the polish evenly across the surface. 6. Avoid excessive application or puddling. 7. Allow the coat to dry fully. 8. Apply an additional coat where required, allowing at least two hours between coats. The manufacturer's technical information specifies that the product should **not be diluted**. Designed for Easy Maintenance Once applied, the polished floor can be maintained using a suitable hard-surface floor cleaning system. Regular cleaning helps remove everyday dust, dirt and grime while preserving the appearance of the protective polish. For best results, use a compatible Bona hard-surface floor cleaner as part of a regular maintenance routine. Bona recommends polishing at intervals according to traffic levels, with more frequently used floors generally requiring more regular maintenance. Not a Floor Cleaner It is important to understand that Bona Hard Surface Floor Polish is a **floor polish rather than a cleaning product**. The floor should be thoroughly cleaned before application so that dirt and residue are not sealed beneath the protective coating. Preparing the surface correctly is one of the most important steps in achieving a smooth, attractive and long-lasting result. Suitable for Professional Floor Care Bona Hard Surface Floor Polish is an excellent addition to professional cleaning and floor maintenance equipment. Its combination of high-gloss appearance, protective performance and broad surface compatibility makes it suitable for contractors, cleaning companies, facilities managers and property maintenance teams. It can be particularly useful when a floor needs to be refreshed quickly without undertaking a complete flooring replacement or major restoration project. Key Features * Professional-quality hard-surface floor polish * High-gloss finish * Durable urethane acrylic formulation * Helps protect against everyday wear * Helps fill micro-scratches and scuffs * Restores shine to dull-looking floors * Suitable for laminate and LVT * Suitable for vinyl and linoleum * Suitable for stone and ceramic tile * Suitable for compatible sealed hard surfaces * Approximate coverage of 50m per litre * Touch dry in approximately 3060 minutes * Minimum 2-hour recoating time * Ready to use do not dilute * Designed for use with a Bona Microfiber Applicator Pad * GREENGUARD certified * Suitable for residential and commercial applications Important Usage Information Bona Hard Surface Floor Polish should only be used on suitable, sealed hard flooring surfaces. It is **not intended for waxed or oiled floors**, and the surface should always be tested before full application to confirm adhesion and the desired appearance. For previously polished floors, any significant build-up should be removed using an appropriate Bona polish remover before applying a fresh coat. This helps ensure the new polish bonds correctly and provides a consistent finish. Why Choose Bona Hard Surface Floor Polish? The **Bona Hard Surface Floor Polish** provides an effective way to revive tired-looking sealed hard floors while adding a durable protective layer. Its urethane acrylic formulation helps fill micro-scratches, reduce the appearance of scuffs and restore a striking high-gloss finish. With its broad range of suitable applications, fast drying characteristics and excellent coverage, it is a practical choice for both professional cleaners and homeowners. Whether you're refreshing laminate flooring in a home, restoring shine to LVT in a commercial property or maintaining hard flooring in a busy workplace, Bona Hard Surface Floor Polish delivers an attractive and protective finish designed to keep compatible floors looking their best for longer.

3 Moerman Pocket Scraper 4cm Compact Professional Glass Scraper for Window Cleaning The **Moerman Pocket Scraper 4cm** is a compact, professional-grade scraper designed to remove stubborn dirt, paint, stickers, tape, adhesive residue and other contaminants from glass and smooth surfaces with precision and ease. Small enough to fit comfortably into a pocket or tool pouch, this practical scraper is an essential accessory for professional window cleaners, cleaners, decorators and DIY users who need a reliable scraping tool close at hand. Manufactured by **Moerman**, a trusted name in professional window cleaning equipment, the Pocket Scraper combines a durable construction with an ergonomic soft rubber grip and a retractable blade system for safe storage and convenient everyday use. Its compact 4cm blade width makes it ideal for detailed cleaning tasks and working in confined spaces where larger scrapers may be less practical. The scraper features a safety locking mechanism, an ergonomic rubber cover and an easy blade replacement system for quick maintenance. Designed for Professional Window Cleaning Window cleaning often involves more than simply washing the glass. Paint splashes, bird droppings, stickers, tape residue, tree sap and stubborn dirt can become bonded to the surface, making them difficult to remove with traditional cleaning solutions alone. The Moerman Pocket Scraper provides an effective solution by allowing users to carefully remove these contaminants before finishing the glass with a washer and squeegee. It is an excellent addition to any professional window cleaning kit and is equally useful for occasional household cleaning tasks. Compact Pocket-Sized Design One of the standout features of the Moerman Pocket Scraper is its compact size. Unlike larger scrapers that take up valuable space in a tool belt or bucket, this scraper fits neatly into: * Trouser pockets * Tool pouches * Window cleaning holsters * Vehicle storage compartments * Cleaning kits * Toolbox drawers Its lightweight design makes it easy to carry throughout the working day without adding unnecessary bulk. Whether you're cleaning domestic properties or large commercial buildings, the scraper is always within easy reach. 4cm Blade for Precision Cleaning The scraper accepts **4cm (1.5") single-edge razor blades**, providing excellent control when working on smaller sections of glass or around frames and edges. The compact blade size makes it ideal for detailed scraping where accuracy is important. Replacement 4cm blades are available separately, allowing the scraper to remain in service for long-term professional use. Retractable Blade for Safe Storage Safety is essential when working with razor blades. The Moerman Pocket Scraper incorporates a retractable blade mechanism that allows the blade to slide safely back into the housing when not in use. This helps reduce the risk of accidental cuts during transport and storage while protecting the blade from unnecessary damage. Safety Locking Mechanism For added confidence during use, the scraper includes a dedicated safety locking mechanism that helps keep the blade securely in position while scraping. This provides improved control during operation while reducing the chance of the blade moving unexpectedly under pressure. Comfortable Ergonomic Grip The scraper features a soft rubber outer casing that provides a comfortable, non-slip grip even when hands are damp. The ergonomic design allows users to maintain excellent control during prolonged cleaning sessions while helping reduce hand fatigue. The textured grip also improves handling when working at awkward angles or applying extra pressure to remove stubborn residues. Quick Blade Replacement Replacing worn blades is quick and straightforward thanks to the easy-release design. Fresh blades help maintain clean scraping performance while reducing the risk of scratching caused by damaged or worn cutting edges. The simple blade replacement process also helps minimise downtime for professional users. Removes a Wide Variety of Contaminants The Moerman Pocket Scraper is suitable for removing many types of surface contamination, including: * Paint spots * Adhesive residue * Window stickers * Tape residue * Bird droppings * Tree sap * Dried dirt * Construction debris * Labels * Silicone residue (where appropriate) * Other stubborn deposits on smooth glass surfaces Always ensure the glass is lubricated and suitable for scraping, and follow best practice to minimise the risk of scratching. Suitable for Multiple Surfaces While primarily designed for glass cleaning, the Pocket Scraper can also be used on other smooth, non-porous surfaces where appropriate, including: * Glass windows * Shopfront glazing * Mirrors * Glass doors * Display cabinets * Shower screens * Ceramic tiles * Certain smooth metal surfaces Always test on an inconspicuous area first and avoid using razor scrapers on delicate, coated or easily scratched materials unless the surface manufacturer confirms they are suitable. Ideal for Professional and Domestic Users The Moerman Pocket Scraper is suitable for a wide range of users, including: * Professional window cleaners * Commercial cleaning contractors * Facilities management teams * Property maintenance companies * Builders * Decorators * Painters * Shop fitters * Homeowners * DIY enthusiasts Its versatility makes it a valuable addition to virtually any cleaning or maintenance toolkit. Simple to Use Using the scraper is quick and straightforward: 1. Extend and lock the blade securely. 2. Wet the glass or apply suitable window cleaning solution. 3. Hold the scraper at a shallow angle to the surface. 4. Gently remove contaminants using smooth, controlled strokes. 5. Retract the blade after use. 6. Finish cleaning the glass with a window washer and squeegee for a streak-free result. Keeping the blade clean and replacing it when worn helps maintain optimum performance. Built for Everyday Use Professional window cleaners rely on tools that can withstand regular use. The Moerman Pocket Scraper has been designed for everyday cleaning tasks while remaining compact, lightweight and easy to maintain. Its durable construction, ergonomic grip and dependable safety features make it a practical tool for both occasional and high-frequency use. Key Features * Professional 4cm glass scraper * Compact pocket-sized design * Retractable blade for safe storage * Safety locking mechanism * Soft ergonomic rubber grip * Comfortable anti-slip handling * Easy blade replacement system * Accepts 4cm (1.5") single-edge blades * Ideal for removing paint, stickers and adhesive residue * Suitable for professional and domestic use * Lightweight and portable * Designed by Moerman for professional window cleaning applications Why Choose the Moerman Pocket Scraper 4cm? The **Moerman Pocket Scraper 4cm** is a compact yet highly effective tool that delivers professional scraping performance whenever stubborn residue stands in the way of a perfect finish. Its retractable blade, ergonomic grip, safety lock and easy blade replacement system make it a dependable choice for anyone who regularly cleans or maintains glass surfaces. Whether you're a professional window cleaner tackling paint splashes on commercial glazing, a decorator removing excess residue after a renovation or a homeowner cleaning stickers from glass doors, this practical scraper offers the precision, safety and convenience needed to complete the job efficiently. Small enough to fit in your pocket yet durable enough for everyday professional use, the Moerman Pocket Scraper is an essential addition to any window cleaning kit.

3 Junckers Water-Based Primer Fast Drying Primer for Wooden Floors The **Junckers Water-Based Primer (WB Primer)** is a premium acrylic primer developed to prepare untreated and machine-sanded wooden floors before the application of Junckers water-based floor lacquers. Designed for professional flooring contractors and experienced DIY users, this high-performance primer enhances adhesion, promotes a more uniform finish and helps minimise the risk of side-bonding between individual floorboards. It is suitable for use in residential properties, commercial buildings and sports halls, making it a versatile choice for a wide range of timber flooring projects. Available in **Clear**, **White** and **Nordic** finishes, the primer allows you to achieve different visual effects while providing the ideal base for a durable lacquer system. Whether you're restoring an existing hardwood floor or finishing a newly installed timber floor, Junckers WB Primer helps create a professional-quality result that enhances the natural beauty of the wood. The Perfect Foundation for a Durable Floor Finish A high-quality floor finish begins with proper preparation. Junckers Water-Based Primer penetrates and seals the timber surface while creating an excellent base for subsequent coats of Junckers water-based floor lacquer. Using the correct primer helps improve the overall appearance of the finished floor while ensuring the lacquer bonds evenly across the surface. It also contributes to a smoother finish with enhanced durability and consistent colour. Fast Drying Formula Time is often an important consideration during flooring projects. Junckers WB Primer features a fast-drying water-based formulation that allows work to progress efficiently. Under normal conditions of approximately 20C and 50% relative humidity, the primer dries in around **12 hours**, allowing the next stage of the finishing process to begin without unnecessary delays. Actual drying times may vary depending on temperature, humidity and ventilation. Its quick drying performance makes it suitable for both domestic renovations and commercial flooring installations where minimising downtime is important. Helps Minimise Side-Bonding One of the key advantages of Junckers WB Primer is its ability to help reduce the risk of **side-bonding** between individual floorboards. Side-bonding occurs when lacquer bridges the small gaps between timber boards, potentially restricting their natural movement as humidity levels change. By using an appropriate primer, the likelihood of this issue is reduced, helping to maintain the long-term performance and appearance of the floor. This makes WB Primer particularly valuable for quality timber flooring installations. Available in Multiple Finish Options Junckers Water-Based Primer is available in several versions to suit different design preferences. Clear The Clear version preserves the traditional appearance of natural timber while providing an ideal base for finishing coats of lacquer. White The White primer creates a lighter appearance while still allowing the natural grain of the wood to remain visible, making it ideal for bright, contemporary interiors. Nordic The Nordic version contains light white pigmentation that helps create the popular untreated wood look on light timber species such as oak, producing a modern Scandinavian-style finish. Colour intensity can vary depending on the timber species, so testing on a small area before full application is recommended. ([Junckers][1]) Suitable for a Wide Range of Wooden Floors Junckers WB Primer is designed for use on many interior timber flooring types, including: * Solid hardwood flooring * Engineered wood flooring * Parquet flooring * Strip flooring * Plank flooring * Residential timber floors * Commercial wooden floors * Sports hall flooring For tropical hardwoods, oily timber species or dark patterned floors such as herringbone, Junckers recommends using its solvent-based SB Primer instead for the best adhesion and appearance. Excellent Coverage The primer provides an approximate coverage rate of **8m per litre**, offering economical performance across a variety of flooring projects. Actual coverage may vary depending on the condition, porosity and absorbency of the timber surface. Smooth, well-prepared floors generally achieve better coverage than rough or highly absorbent wood. Easy Application Junckers WB Primer has been developed for straightforward application using professional flooring tools. For best results: 1. Ensure the floor is clean, dry and free from dust, grease, wax and old polish residues. 2. Sand the timber to the recommended grit. 3. Vacuum thoroughly and remove all sanding dust. 4. Stir or shake the primer before use. 5. Apply an even coat using a short-pile floor roller. 6. Allow the primer to dry completely. 7. Lightly abrade the surface where recommended. 8. Finish with two coats of a compatible Junckers water-based floor lacquer. The primer should not be sprayed or poured directly onto the floor. Following the manufacturer's recommended application method helps achieve the best possible finish. Compatible with Junckers Water-Based Lacquers Junckers WB Primer has been specifically formulated for use beneath Junckers water-based finishing systems. Depending on the expected level of traffic, it can be overcoated with products such as: * Junckers MT200 Floor Lacquer * Junckers MT500 Floor Lacquer * Junckers HT700 Floor Lacquer * Junckers HP800 Sport Floor Lacquer Using compatible products throughout the finishing system helps deliver optimum adhesion, durability and long-term performance. Water-Based Technology The acrylic water-based formulation provides several practical benefits, including: * Low odour during application * Fast drying performance * Easy clean-up with soap and water * Excellent compatibility with Junckers water-based lacquers These characteristics make the primer suitable for use in occupied buildings where reducing disruption is important. Danish Indoor Climate Label Junckers WB Primer has received the **Danish Indoor Climate Labelling**, demonstrating that it has been independently assessed for emissions and indoor air quality. This certification makes it an excellent choice for homes, schools, offices and other environments where maintaining a healthy indoor climate is a priority. Suitable for Residential, Commercial and Sports Floors Its versatility makes Junckers Water-Based Primer suitable for numerous applications, including: * Private homes * Apartments * Offices * Hotels * Restaurants * Schools * Sports halls * Community centres * Retail premises * Public buildings * Commercial refurbishments Whether you're coating a single room or a large commercial floor, the primer provides a dependable foundation for a professional finish. Key Features * Fast-drying water-based acrylic primer * Designed for untreated and machine-sanded timber floors * Helps minimise side-bonding between floorboards * Improves adhesion of water-based floor lacquers * Available in Clear, White and Nordic finishes * Suitable for residential, commercial and sports floors * Approximate coverage of 8m per litre * Dries in approximately 12 hours * Easy application with a short-pile roller * Compatible with Junckers water-based floor lacquer systems * Soap and water tool clean-up * Danish Indoor Climate Label certified * Professional-quality finish Why Choose Junckers Water-Based Primer? The **Junckers Water-Based Primer** provides the ideal starting point for achieving a durable, attractive and professional-quality timber floor finish. Its fast-drying acrylic formulation prepares bare wood for lacquer, improves adhesion and helps reduce the risk of side-bonding, while the choice of Clear, White or Nordic finishes allows you to tailor the final appearance to suit your project. Whether you're renovating an existing hardwood floor, finishing a newly installed timber floor or preparing a large commercial space, Junckers WB Primer delivers reliable performance, straightforward application and excellent compatibility with the Junckers range of water-based floor lacquers. By providing a strong foundation for the finishing system, it helps ensure beautiful, long-lasting results that protect and enhance timber floors for years to come.

3 Junckers MT500 Floor Lacquer Water-Based Polyurethane Floor Lacquer for Medium Traffic Wooden Floors The **Junckers MT500 Floor Lacquer** is a premium water-based, one-component polyurethane/acrylic floor lacquer designed to protect and enhance wooden floors in residential and light commercial environments. Developed to provide an attractive, hard-wearing finish, MT500 combines excellent durability with fast drying times and easy application, making it a popular choice for flooring professionals and experienced DIY users alike. It is particularly suited to areas exposed to medium levels of foot traffic, including kitchens, hallways, stairs and offices. Suitable for use on new, sanded and previously sealed timber floors, Junckers MT500 delivers a clear, durable finish that enhances the natural beauty of the wood while helping to protect it against everyday wear and tear. Designed for Medium Traffic Areas Not every floor requires an industrial-grade coating. The MT500 Floor Lacquer has been specifically developed for environments where floors receive regular daily use but are not subjected to the heavy demands of retail stores, museums or restaurants. Typical applications include: * Hallways * Living rooms * Dining rooms * Kitchens * Bedrooms * Home offices * Staircases * Apartment floors * Light commercial offices * Meeting rooms Its excellent balance of durability and ease of application makes it ideal for projects where reliable everyday performance is required. Water-Based Polyurethane Technology Junckers MT500 is formulated using a modern water-based polyurethane/acrylic system. This provides several advantages over many traditional solvent-based floor finishes, including lower odour during application, faster drying times and easier cleaning of application tools with soap and water. The water-based formulation also helps preserve the natural appearance of timber, producing a clear finish that allows the grain and character of the wood to remain visible. One-Component Simplicity Unlike two-component systems that require mixing with a hardener before use, MT500 is supplied as a ready-to-use one-component lacquer. Benefits include: * No complicated mixing * Reduced product waste * Faster preparation * Simple application * Consistent results * Ideal for smaller projects This ease of use makes it suitable for both professional flooring contractors and confident DIY users working on timber floor renovations. Suitable for New and Existing Floors The lacquer is suitable for a wide range of wooden flooring projects. Recommended for: * Newly installed timber floors * Machine-sanded wooden floors * Previously lacquered floors * Hardwood flooring * Engineered wood flooring * Solid timber flooring * Parquet floors * Domestic wooden floors For untreated or freshly sanded timber, Junckers recommends using a compatible primer before applying the finishing coats of MT500 to achieve optimum adhesion and performance. Attractive Natural Finish One of the biggest advantages of Junckers MT500 is its ability to enhance the natural beauty of wood without masking its character. The lacquer dries to a clear, colourless finish that highlights the timber's natural grain while providing long-lasting protection. It is available in a range of sheen levels, including: * Ultramatt * Matt * Silk Matt This allows you to achieve the appearance that best suits your interior design, from an almost untreated natural look to a slightly richer finish. Fast Drying Performance Time is often critical during floor installation and refurbishment projects. MT500 has been developed to dry quickly, allowing additional coats to be applied without lengthy waiting periods. Under normal conditions: * Recoat after approximately 4 hours * Ready for light foot traffic after around 8 hours * Fully cured after approximately 72 hours Actual drying times may vary depending on room temperature, humidity and ventilation. Excellent Flow and Levelling A quality floor lacquer should not only protect the floor but also leave a smooth, attractive finish. MT500 features excellent flow characteristics, helping to minimise roller marks and create an even coating across the surface. The result is a professional-looking finish that enhances the appearance of both modern and traditional timber floors. Easy Application For best results: 1. Ensure the floor is clean, dry and free from dust, grease and old polish residues. 2. Sand the surface if necessary. 3. Apply a compatible Junckers primer on bare timber. 4. Allow the primer to dry. 5. Lightly abrade between coats where recommended. 6. Apply MT500 using a suitable floor roller or brush. 7. Allow sufficient drying time before recoating. Following the manufacturer's application guidelines helps achieve the best finish and long-term durability. Excellent Coverage The lacquer provides excellent coverage of approximately **10m per litre**, making it an economical choice for both small domestic rooms and larger flooring projects. Coverage may vary depending on the absorbency and condition of the timber surface. Healthy Indoor Environment Junckers MT500 has received the **Danish Indoor Climate Labelling**, a recognised certification awarded to products that meet strict requirements for low emissions and indoor air quality. This makes it an excellent choice for homes, offices, schools and other interior spaces where indoor comfort is important. Suitable for Residential and Commercial Projects Junckers MT500 is ideal for: * Private homes * Apartments * Holiday homes * Office buildings * Meeting rooms * Residential developments * Schools * Community buildings * Light commercial premises For areas exposed to heavier wear, Junckers also offers higher-performance systems designed specifically for demanding commercial environments. Key Features * Water-based one-component polyurethane/acrylic floor lacquer * Suitable for medium traffic wooden floors * Fast drying formulation * Excellent flow and levelling properties * Easy-to-use ready-mixed system * Suitable for untreated and previously lacquered timber floors * Available in Ultramatt, Matt and Silk Matt finishes * Approximate coverage of 10m per litre * Suitable for professional and DIY applications * Low odour during application * Soap and water clean-up * Danish Indoor Climate Label certified * Suitable for domestic and light commercial use Why Choose Junckers MT500 Floor Lacquer? The **Junckers MT500 Floor Lacquer** offers an excellent balance of durability, ease of application and natural appearance, making it an ideal choice for protecting timber floors in homes and light commercial settings. Its water-based polyurethane/acrylic technology provides a tough, attractive finish while remaining straightforward to apply, with fast drying times that help projects move forward efficiently. Whether you're renovating an existing hardwood floor, finishing a newly installed timber floor or refreshing a previously sealed surface, Junckers MT500 delivers dependable protection, excellent coverage and a professional-quality finish. Designed to preserve the beauty of natural wood while standing up to everyday use, it is a trusted solution for flooring professionals and homeowners who want long-lasting results without unnecessary complexity.

3 Saicos Ecoline MultiTop Hardener 2K 0.45L Professional Hardener for Enhanced Durability & Faster Drying The **Saicos Ecoline MultiTop Hardener 2K 0.45L** is a professional-grade additive designed specifically for use with the **Saicos Ecoline MultiTop System**. When mixed with the compatible water-based floor lacquer, it transforms the coating into a high-performance two-component (2K) finish, providing increased abrasion resistance, improved chemical resistance and faster curing times. The 0.45L hardener is precisely measured to match a 4.55L container of Saicos Ecoline MultiTop, creating a 5-litre 2K coating system for professional floor finishing projects. Ideal for contractors, flooring specialists and experienced DIY users, this hardener is recommended for projects where maximum durability and long-term performance are required. Whether you're coating a busy family home, a commercial office, a retail shop or a public building, the Saicos Ecoline MultiTop Hardener 2K helps create a floor finish capable of standing up to demanding daily use. Converts MultiTop into a High-Performance 2K System While Saicos Ecoline MultiTop performs exceptionally well as a one-component floor lacquer, adding the Ecoline Hardener 2K significantly enhances its performance. Once mixed, the lacquer becomes a professional two-component coating with improved resistance to wear and chemicals, making it suitable for environments where floors experience heavy traffic or frequent cleaning. This makes the system particularly attractive for commercial flooring projects where durability is essential. Increased Abrasion Resistance Wooden floors are exposed to constant wear from foot traffic, furniture movement and everyday activity. The addition of the Hardener 2K increases the abrasion resistance of the MultiTop coating, helping the finished surface retain its appearance for longer. This enhanced durability makes it suitable for areas such as: * Retail shops * Offices * Hotels * Restaurants * Schools * Community buildings * Reception areas * Showrooms * Public buildings * Busy family homes Floors finished with the complete 2K system are better equipped to withstand demanding everyday use. Improved Chemical Resistance In addition to improved wear resistance, the hardener also increases the coating's resistance to common household and commercial chemicals. This provides greater protection against spills, cleaning products and routine maintenance, helping preserve the appearance of the timber floor over time. For commercial premises where floors are cleaned frequently, this additional protection is especially beneficial. Faster Drying and Earlier Use One of the major benefits of adding the Hardener 2K is accelerated curing. The additive helps the lacquer dry more quickly, particularly in less favourable conditions such as high humidity. As a result, coated surfaces become ready for light use sooner, helping reduce downtime and allowing projects to progress more efficiently. This can be particularly valuable for commercial installations where minimising disruption is important. Precision-Matched Packaging The 0.45L container has been specifically designed to complement one 4.55L container of Saicos Ecoline MultiTop lacquer. Once combined, the result is a 5-litre professional 2K floor coating system, eliminating guesswork and ensuring the correct mixing ratio is achieved. The hardener should be added directly to the lacquer, mixed thoroughly and used within the product's specified working time according to the manufacturer's instructions. Suitable for a Wide Range of Timber Floors When used as part of the complete Saicos Ecoline MultiTop System, the Hardener 2K is suitable for protecting: * Solid wood flooring * Engineered timber flooring * Parquet floors * Multi-layer wood flooring * Bamboo flooring * Hardwood floors * Commercial timber floors * Domestic wooden floors * Interior timber surfaces It can also be used over compatible Saicos primers and oil ground coats where recommended. Ideal for Professional Flooring Projects The enhanced properties provided by the Hardener 2K make it particularly suitable for demanding projects, including: * Office refurbishments * Retail premises * Restaurants * Hotels * Schools * Sports facilities * Healthcare environments * Apartment developments * Hospitality venues * Commercial property maintenance Where long-lasting protection is required, the addition of the hardener helps maximise the performance of the MultiTop coating. Easy Mixing Process The product has been designed for straightforward use. The typical application process includes: 1. Add the full contents of the 0.45L Hardener 2K into one 4.55L container of Saicos Ecoline MultiTop. 2. Shake or mix thoroughly for approximately one minute. 3. Allow the mixture to rest briefly. 4. Mix again before application. 5. Apply using the recommended Saicos roller system. Once mixed, the coating should be used within the manufacturer's recommended pot life, and the mixed container should not be resealed for storage. Suitable for High-Traffic Areas Because of its improved abrasion resistance and durability, the complete 2K system is ideal for floors subjected to frequent daily use, including: * Entrance halls * Corridors * Kitchens * Living areas * Conference rooms * Shops * Cafs * Museums * Exhibition spaces * Public reception areas The additional protection helps keep timber floors looking attractive for longer while reducing the effects of everyday wear. Compatible with the Saicos Ecoline System The Hardener 2K forms part of the wider Saicos Ecoline modular finishing system. It is designed exclusively for use with the compatible MultiTop lacquer, allowing flooring professionals to customise the coating with additional options such as UV protection, anti-slip additives and colour modifiers depending on the needs of each project. This modular approach gives contractors flexibility while maintaining the high performance expected from a professional floor finishing system. Key Features * Professional 2K hardener additive * Specifically designed for Saicos Ecoline MultiTop * 0.45L container matched to 4.55L MultiTop lacquer * Increases abrasion resistance * Improves chemical resistance * Accelerates drying and curing * Creates a durable two-component floor coating * Suitable for wood and bamboo flooring * Ideal for domestic and commercial projects * Easy to mix and apply * Suitable for high-traffic areas * Professional-quality performance Why Choose Saicos Ecoline MultiTop Hardener 2K? For projects where maximum floor protection is essential, the **Saicos Ecoline MultiTop Hardener 2K** is the ideal companion to the Saicos Ecoline MultiTop lacquer. By converting the coating into a high-performance two-component system, it delivers greater durability, enhanced resistance to abrasion and chemicals, and faster curing times, making it suitable for even the most demanding flooring applications. Whether you're installing a new hardwood floor, refurbishing a commercial space or protecting a busy family home, this professional hardener helps achieve a long-lasting, attractive finish that stands up to everyday wear. Designed specifically for the Saicos Ecoline range, it offers dependable performance, simple mixing and the confidence of a coating system developed for exceptional results.

3 Nordicare Mineral Oil 500ml Food Safe Mineral Oil for Wooden Chopping Boards, Butcher Blocks & Worktops Keep your wooden kitchen surfaces looking their best with **Nordicare Mineral Oil 500ml**, a premium food-safe treatment designed to nourish, protect and extend the life of wooden chopping boards, butcher blocks, worktops and other food preparation surfaces. Formulated using high-quality mineral oils, this odourless and tasteless treatment penetrates deep into the wood to help reduce moisture absorption, minimise staining and maintain the natural beauty of the timber. It is suitable for both new and previously treated wooden surfaces and can be used as an initial treatment or as part of a regular maintenance routine. Whether you're maintaining a domestic kitchen, a restaurant, a caf or a professional food preparation area, Nordicare Mineral Oil provides a simple and effective way to keep wooden surfaces hygienic, protected and looking their best. ## Food Safe for Kitchen Surfaces Wooden chopping boards and worktops require special care, particularly when they come into contact with food. Nordicare Mineral Oil is formulated to be food safe, making it suitable for surfaces used in food preparation. The oil is both odourless and tasteless, meaning it won't affect the flavour or aroma of food while helping to preserve the condition of the wood. Its food-safe formulation makes it an excellent choice for both home kitchens and commercial catering environments where wooden surfaces are used daily. Deep Penetrating Protection Unlike surface coatings that simply sit on top of the timber, Nordicare Mineral Oil penetrates into the wood fibres to provide protection from within. This helps reduce the absorption of water, food juices and everyday spills that can cause swelling, staining or drying over time. Regular oiling also helps keep the wood nourished, reducing the likelihood of cracking, splitting and premature wear. Enhances the Natural Beauty of Wood Wood naturally loses moisture through everyday use and repeated washing. Applying Nordicare Mineral Oil helps restore the rich appearance of the timber by enhancing its natural grain and colour without creating a thick surface film or glossy artificial finish. The result is a beautifully maintained wooden surface that retains its authentic look and feel while receiving dependable everyday protection. Suitable for a Wide Range of Wooden Surfaces Nordicare Mineral Oil is suitable for many untreated or previously oiled wooden items, including: * Wooden chopping boards * Butcher blocks * Kitchen worktops * Bread boards * Serving boards * Wooden utensils * Wooden bowls * Food preparation surfaces * Wooden countertops * Wooden kitchen accessories It can also be used on many other interior wooden surfaces where a food-safe mineral oil treatment is appropriate. Always test on a small inconspicuous area before treating the entire surface. Helps Reduce Water Marks and Staining Wood is naturally porous, meaning it can absorb moisture and become marked if left untreated. Nordicare Mineral Oil helps create an invisible protective barrier that reduces the penetration of liquids into the timber, making surfaces easier to maintain and helping to minimise everyday staining. Regular applications help maintain the protective qualities of the wood while keeping it looking fresh. Easy to Apply Maintaining wooden kitchen surfaces is straightforward with Nordicare Mineral Oil. For the best results: 1. Ensure the wooden surface is clean, dry and free from dust or grease. 2. Apply a small amount of mineral oil using a clean, lint-free cloth. 3. Spread the oil evenly across the surface, working with the grain. 4. Allow the oil to soak into the timber for around 15 minutes. 5. Wipe away any excess oil using a clean cloth. 6. Buff lightly to achieve a smooth, even finish. 7. Reapply periodically as required to maintain protection. Regular maintenance helps prolong the life of wooden kitchen surfaces while preserving their appearance. Excellent Coverage The 500ml bottle offers generous coverage, making it suitable for treating multiple chopping boards, worktops or other wooden items. Coverage will vary depending on the type, size and absorbency of the timber, but one bottle can typically treat a significant surface area, providing excellent value for both domestic and professional users. Ideal for Home and Commercial Use Nordicare Mineral Oil is suitable for a wide variety of environments, including: * Domestic kitchens * Restaurants * Cafs * Hotels * Catering facilities * Delicatessens * Food production areas * Butcher shops * Bakeries * Hospitality businesses * Cookery schools Its food-safe properties make it a trusted choice wherever wooden food preparation surfaces require regular maintenance. Helps Extend the Life of Wooden Surfaces Proper maintenance is one of the simplest ways to maximise the lifespan of wooden kitchen accessories. Repeated washing, food preparation and exposure to moisture gradually dry out timber, making it more vulnerable to damage. Routine application of Nordicare Mineral Oil helps keep the wood conditioned and protected, reducing wear and helping maintain a smooth, attractive finish for longer. Low Odour and Comfortable to Use The odourless formulation makes the product pleasant to apply in kitchens and food preparation areas without leaving lingering smells. Because it is tasteless as well as odourless, treated chopping boards and worktops can be returned to food preparation once the treatment has been absorbed and any excess has been removed, following the manufacturer's guidance. Key Features * Premium food-safe mineral oil * Suitable for wooden chopping boards and butcher blocks * Ideal for kitchen worktops and food preparation surfaces * Odourless and tasteless formulation * Penetrates deep into wood fibres * Helps reduce moisture absorption * Assists in protecting against stains and water marks * Enhances the natural grain and colour of timber * Easy to apply with a cloth * Suitable for regular maintenance * Excellent coverage from a 500ml bottle * Suitable for domestic and commercial kitchens Why Choose Nordicare Mineral Oil 500ml? Wooden kitchen surfaces deserve regular care to maintain both their appearance and performance. Nordicare Mineral Oil 500ml provides a simple, effective and food-safe solution for protecting chopping boards, butcher blocks and worktops against everyday wear, moisture and staining. Its deep-penetrating formula nourishes the wood from within, enhancing its natural beauty while helping to prolong its lifespan. Whether you're caring for a single chopping board at home or maintaining multiple food preparation surfaces in a busy commercial kitchen, Nordicare Mineral Oil offers dependable protection, straightforward application and long-lasting results. Easy to use and suitable for routine maintenance, it is an essential product for anyone who wants to keep wooden kitchen surfaces in excellent condition year after year.

3 Saicos Ecoline MultiTop System Premium Water-Based Floor Lacquer for Wood & Bamboo Floors The **Saicos Ecoline MultiTop System** is an advanced water-based floor lacquer designed to provide exceptional protection, durability and versatility for wooden and bamboo floors. Developed as a modular coating system, it allows flooring professionals to tailor the finish to suit a wide range of residential, commercial and public environments through the use of compatible additives. The system can be used as a high-performance 1-component coating or upgraded with optional additives such as a hardener, UV protection, anti-slip additive or colour modifiers, depending on the project's specific requirements. Whether you're finishing newly installed timber flooring or renovating an existing floor, the Saicos Ecoline MultiTop System delivers a smooth, attractive and highly durable finish that enhances the natural beauty of wood while offering long-lasting protection against daily wear. Modular Floor Finishing System Unlike conventional floor lacquers, the Saicos Ecoline MultiTop System is designed to adapt to different applications. The base lacquer can be used on its own for many residential projects or combined with specially developed additives to create customised performance characteristics. Compatible additives include a 2K hardener for increased durability, UV protection to reduce colour changes caused by sunlight, an anti-slip additive for improved grip, and colour additives that allow you to achieve different design effects. This flexibility makes the system suitable for a broad range of flooring installations, from private homes to demanding commercial environments. Water-Based Polyurethane Technology The Ecoline MultiTop System is formulated using water-based polyurethane technology, combining excellent wear resistance with low odour during application. Water-based lacquers have become a preferred choice for many flooring professionals because they dry quickly, are easier to work with and help maintain the natural appearance of timber compared to many solvent-based alternatives. The result is a clear, durable protective coating that allows the character and grain of the wood to remain the centre of attention. Suitable for Wood and Bamboo Floors The Saicos Ecoline MultiTop System has been developed specifically for interior timber and bamboo surfaces. Suitable applications include: * Solid wood flooring * Engineered wood flooring * Parquet flooring * Multi-layer timber flooring * Bamboo flooring * Hardwood flooring * Domestic timber floors * Commercial wooden floors * Interior wooden furniture surfaces It can also be used in conjunction with compatible Saicos primers and oil ground coats where required. Exceptional Wear Resistance Floors experience constant traffic, furniture movement and everyday use. The Ecoline MultiTop System provides a hard-wearing protective surface designed for both normal and high-traffic environments. When used with the optional Ecoline 2K Hardener, the coating offers enhanced durability and abrasion resistance, making it particularly suitable for busy commercial spaces, retail environments, offices and public buildings. Natural Looking Finish One of the major advantages of the Saicos Ecoline MultiTop System is its ability to preserve the natural beauty of timber. Available in a range of sheen levels, including ultra matt, matt, satin matt and high gloss, it allows you to achieve the exact appearance required for your flooring project. Optional additives such as Ecoline Pure can create a finish that closely resembles untreated wood while still providing excellent surface protection. Fast Drying Performance Time is often critical during flooring installations and refurbishment projects. The water-based formulation offers relatively quick drying between coats, allowing projects to progress efficiently and reducing downtime compared to many traditional finishes. Under normal conditions, individual coats typically dry within several hours, although drying times vary depending on temperature, humidity and ventilation. This makes the system suitable for both residential renovations and commercial flooring projects where speed is important. Professional Application The Saicos Ecoline MultiTop System has been developed with professional floor finishers in mind and is suitable for application using recommended floor rollers and professional installation techniques. Proper preparation, including sanding and dust removal, is essential for achieving the best possible finish. The lacquer can be applied over compatible Saicos primers or directly as part of the recommended coating system, depending on the timber species and project requirements. Ideal for Residential and Commercial Projects Its versatility makes the Ecoline MultiTop System suitable for a wide variety of interior environments, including: * Family homes * Apartments * Hotels * Restaurants * Offices * Retail stores * Schools * Public buildings * Community centres * Exhibition spaces * Showrooms * Hospitality venues The ability to tailor the coating with optional additives allows flooring professionals to specify the most suitable finish for each project. Compatible Additives One of the defining features of the Ecoline MultiTop System is the wide selection of compatible additives available. These include: * 2K Hardener for increased durability * UV Protection additive * Anti-Slip R10 additive * Extra White additive * Pure additive for a natural untreated appearance * Pitch Black additive * Slow Down additive for extended working time These accessories enable the system to be customised for different environmental conditions, design requirements and application techniques. Environmentally Conscious Choice As part of the Saicos Ecoline range, the MultiTop System has been developed with modern environmental expectations in mind. Its water-based formulation offers low VOC content compared with many traditional solvent-based finishes while still delivering the durability expected from a professional floor lacquer. Key Features * Premium water-based polyurethane floor lacquer * Suitable for wood and bamboo flooring * Modular coating system * Can be used as a 1K coating or upgraded with optional additives * Fast drying formulation * Excellent wear resistance * Suitable for domestic and commercial flooring * Compatible with Saicos Ecoline primers * Available in multiple sheen levels * Helps preserve the natural appearance of timber * Professional-quality finish * Suitable for high-traffic areas * Low odour during application * Easy to customise for different project requirements ## Why Choose the Saicos Ecoline MultiTop System? The Saicos Ecoline MultiTop System offers flooring professionals and contractors a highly flexible solution for protecting timber and bamboo floors. Instead of purchasing multiple specialist products, you can adapt a single lacquer system using purpose-designed additives to achieve enhanced durability, improved slip resistance, UV protection or unique visual effects. Whether you're installing a beautiful timber floor in a private home, refurbishing a busy commercial premises or protecting high-quality bamboo flooring, the Saicos Ecoline MultiTop System provides outstanding performance, professional-quality results and long-lasting protection. With its advanced water-based technology, modular design and premium finish, it is an excellent choice for flooring professionals seeking versatility without compromising on quality.

3 Bona Mega EVO Floor Lacquer Premium Water-Based Floor Varnish for Professional Wood Floor Protection Protect and enhance the natural beauty of your wooden floors with **Bona Mega EVO Floor Lacquer**, the next generation one-component water-based floor lacquer developed for exceptional durability, rapid curing and professional-quality results. Designed for both demanding residential properties and light to medium commercial environments, Bona Mega EVO combines innovative self-crosslinking technology with outstanding scratch, wear and chemical resistance to create a long-lasting finish that keeps timber floors looking beautiful for years. Trusted by professional floor sanding contractors and flooring specialists across the world, Bona Mega EVO represents the latest evolution in waterborne floor finishes. Unlike traditional lacquers that require complicated mixing or lengthy curing times, Bona Mega EVO offers a simple single-component system that is easy to apply while delivering performance previously associated with two-component products. Whether you're refinishing hardwood flooring, sealing newly installed timber floors or protecting wooden stairs, furniture or interior woodwork, Bona Mega EVO provides professional results with less effort and faster project completion. Next Generation Self-Crosslinking Technology What sets Bona Mega EVO apart from conventional floor lacquers is its advanced self-cross-linking technology. As the lacquer is applied, the coating begins to develop a durable cross-linked structure without requiring the addition of a separate hardener. This innovative technology allows the coating to cure more quickly while producing a highly durable protective finish that resists everyday wear and tear. The faster curing process means shorter waiting times between coats and an earlier return to service once the project has been completed. Flooring contractors can complete projects more efficiently, while homeowners benefit from reduced disruption and faster access to their newly finished floors. This advanced technology also provides exceptional levelling properties, helping to minimise roller marks while producing a smooth, professional finish across the entire surface. Outstanding Protection Against Everyday Wear Wood flooring represents a significant investment, making long-term protection essential. Bona Mega EVO has been developed specifically to withstand the demands of heavy domestic use and medium commercial traffic. Once fully cured, the lacquer forms a hard-wearing protective layer that helps defend floors against: * Daily foot traffic * Shoe scuffs * Furniture movement * Minor impacts * Surface scratches * Household chemicals * Spillages * General wear and abrasion Its durable polyurethane-acrylate formulation maintains its protective qualities even in busy family homes, offices, hotel rooms, boutiques and similar commercial settings where attractive wooden floors are constantly in use. Beautiful Natural Appearance A high-performance floor lacquer should protect the timber while allowing its natural character to remain visible. Bona Mega EVO has been carefully formulated to provide a crystal-clear, non-yellowing finish that enhances the natural beauty of wood without creating unwanted amber tones over time. This makes it particularly suitable for modern interior designs where light oak, ash, maple and other pale timbers are increasingly popular. Available in a choice of sheen levels including Matt, Silk Matt, Extra Matt and Ultra Matt (availability may vary by supplier), Bona Mega EVO allows you to achieve everything from an almost invisible natural finish to a subtle contemporary sheen. Unlike many traditional solvent-based varnishes, the coating remains clear throughout its lifespan, preserving the original appearance of the timber. No Primer Required on Many Projects One of the major advantages of Bona Mega EVO is its flexibility during installation. For many standard wood flooring applications, the lacquer can be applied directly onto properly prepared timber without requiring a separate primer, reducing both material costs and labour time. This allows contractors to complete projects more efficiently while still achieving outstanding durability and appearance. Where colour enhancement or specialised timber species require it, Bona Mega EVO remains fully compatible with Bona's range of professional water-based primers, providing complete flexibility for every project. Quick Drying for Faster Project Completion Time is valuable for both professional contractors and homeowners. Bona Mega EVO has been engineered to reduce downtime throughout the finishing process. Under normal conditions, additional coats can typically be applied after only 12 hours, with light foot traffic possible after approximately 8 hours. Full curing continues over the following days, allowing the floor to develop maximum strength while returning to use much sooner than many traditional finishes. Actual drying times will vary depending on temperature, humidity and site conditions. Easy, Forgiving Application Professional-quality results are easier to achieve thanks to the smooth consistency and excellent flow characteristics of Bona Mega EVO. The lacquer spreads evenly across the timber, providing excellent filling properties and helping to reduce lap marks or uneven finishes. Its forgiving application characteristics make it suitable for experienced DIY users as well as professional flooring contractors. For best results: 1. Sand the timber back to clean, bare wood. 2. Remove all dust, wax, grease and contamination. 3. Ensure the floor is dry and acclimatised. 4. Shake the container thoroughly before use. 5. Apply evenly using a Bona Roller or approved applicator. 6. Allow adequate drying time between coats. 7. Lightly abrade between coats where recommended. 8. Apply the final coat evenly across the entire floor. Following the correct preparation process ensures maximum durability, excellent adhesion and a flawless final finish. Suitable for Residential and Commercial Applications Bona Mega EVO is designed for a wide variety of timber flooring projects. Ideal applications include: * Solid hardwood floors * Engineered wood flooring * Domestic living rooms * Bedrooms * Hallways * Dining rooms * Home offices * Retail shops * Hotel bedrooms * Offices * Boutique commercial premises * Wooden staircases * Interior timber joinery For extremely demanding commercial or industrial environments with constant heavy traffic, Bona also offers specialist two-component systems such as Bona Traffic HD. However, for the majority of residential installations and many commercial projects, Bona Mega EVO provides the perfect balance of durability, ease of use and outstanding value. Environmentally Responsible Performance Modern flooring professionals increasingly demand products that deliver outstanding performance while supporting healthier indoor environments. Bona Mega EVO features a waterborne formulation with VOC levels below 3%, contributing to lower indoor emissions and improved working conditions during application. The low-odour formula makes it more pleasant to use than many solvent-based alternatives and helps minimise disruption during renovation projects. The product also meets recognised environmental and indoor air quality standards, including GREENGUARD Gold and EMICODE EC1 Plus certifications, providing confidence for use in homes, schools, healthcare environments and commercial buildings where indoor air quality is a priority. Excellent Coverage and Value Bona Mega EVO delivers impressive coverage, typically achieving approximately **810 square metres per litre per coat**, depending on the timber species, surface preparation and application method. Proper sanding and application using Bona-approved rollers can help maximise coverage while producing a consistently even finish. Its excellent filling properties often reduce the number of coats required compared with lower-quality lacquers, helping to save both time and material costs over the course of a project. Key Features * Premium one-component water-based floor lacquer. * Advanced self-crosslinking technology. * Fast curing and rapid development of durability. * Excellent scratch, wear and chemical resistance. * Suitable for heavy domestic and medium commercial use. * Crystal-clear, non-yellowing finish. * Outstanding levelling and filling properties. * Available in a range of sheen levels. * Often suitable without a separate primer. * Low VOC formulation (below 3%). * Low odour during application. * Compatible with Bona water-based primers. * Easy professional application. * GREENGUARD Gold and EMICODE EC1 Plus certified. * Suitable for solid and engineered wood flooring. Why Choose Bona Mega EVO Floor Lacquer? When you're investing time and money into refinishing a wooden floor, you need a finish that combines professional durability with outstanding appearance. Bona Mega EVO delivers exactly that. Its innovative self-crosslinking technology, rapid curing, excellent resistance to scratches and wear, and crystal-clear non-yellowing finish make it one of the most advanced one-component water-based lacquers available today. Whether you're a professional floor sanding contractor or a homeowner renovating timber floors, Bona Mega EVO provides an easier application process, faster project completion and long-lasting protection that preserves the natural beauty of wood for years to come. With trusted Bona quality, low environmental impact and exceptional performance across residential and commercial applications, Bona Mega EVO is an excellent choice for achieving beautiful, durable wood floors with confidence.

3 Bona Microfiber Applicator Pad Professional Microfibre Pad for Applying Floor Polish, Refreshers & Sealers Achieve a smooth, streak-free professional finish every time with the **Bona Microfiber Applicator Pad**, a premium-quality microfibre pad specially designed for applying Bona floor polishes, refreshers and protective treatments. Whether you're restoring the shine to hardwood flooring, protecting laminate floors or maintaining luxury vinyl tiles, this highly absorbent applicator pad ensures an even, consistent application without leaving streaks, marks or excess product behind. Designed by Bona, one of the world's leading manufacturers of professional floor care products, the Bona Microfiber Applicator Pad combines exceptional absorbency with a soft, non-abrasive microfibre construction to make floor maintenance quicker, easier and more effective. Compatible with all Bona floor mops and most standard hook-and-loop (Velcro-style) mop systems, it is the ideal accessory for homeowners, professional cleaners and flooring contractors who demand flawless results. Designed Specifically for Applying Floor Polishes Applying floor polish correctly is just as important as choosing the right product. Using ordinary cloths, mops or sponges can result in uneven coverage, visible streaks and wasted product. The Bona Microfiber Applicator Pad has been engineered specifically for applying: * Bona Wood Floor Polish * Bona Hard Surface Floor Polish * Bona Wood Floor Refresher * Other Bona floor finishing products Its fine microfibre construction spreads polish evenly across the floor, ensuring a smooth, consistent finish with every application. Instead of soaking up excessive amounts of polish or leaving uneven patches, the pad distributes the product exactly where it is needed, helping to create a professional-quality finish every time. Highly Absorbent for Efficient Product Application One of the biggest advantages of the Bona Microfiber Applicator Pad is its exceptional absorbency. The premium-quality microfibre fibres retain the ideal amount of polish or refresher while gradually releasing it during application. This allows users to cover large floor areas efficiently without repeatedly reloading the applicator. Benefits include: * Even distribution of polish * Reduced product waste * Faster application * Consistent coverage * Professional-looking results Whether you are polishing a small hallway or maintaining an entire commercial floor, the highly absorbent design helps maximise efficiency while reducing overall product consumption. Soft, Non-Abrasive Microfibre When working with polished timber, laminate or luxury vinyl flooring, protecting the surface is essential. The Bona Microfiber Applicator Pad features a soft 100% polyester microfibre construction that glides smoothly across sealed floors without scratching, marking or damaging delicate finishes. Unlike rough cloths or traditional applicators, the fine fibres create an even layer of polish while remaining gentle on sensitive floor surfaces. Suitable for use on: * Hardwood flooring * Engineered wood flooring * Laminate flooring * Luxury Vinyl Tile (LVT) * Vinyl flooring * Ceramic tiles * Stone flooring * Marble * Terrazzo * Sealed hard floors Its gentle action makes it ideal for maintaining premium flooring without compromising the protective finish already in place. Compatible with Bona Floor Mops Convenience is an important part of floor maintenance, and Bona has designed this applicator pad to work seamlessly with its range of floor mops. The pad attaches securely using durable hook-and-loop (Velcro-style) fastening strips, allowing it to be fitted or removed in seconds. Compatible with: * Bona Premium Floor Mop * Bona Spray Mop * Bona Floor Cleaning Kits * Most 4243 cm hook-and-loop mop holders The secure attachment prevents the pad from slipping during use while allowing effortless replacement whenever cleaning or changing pads. Machine Washable and Reusable Unlike disposable applicator pads that require frequent replacement, the Bona Microfiber Applicator Pad has been built for long-term use. After each polishing session, simply rinse the pad thoroughly and wash it using warm water and detergent. The pad can also be machine washed, making maintenance quick and straightforward. With proper care, the applicator pad can be reused **up to 300500 times**, providing excellent long-term value while helping reduce unnecessary waste. To maximise the life of the pad: * Wash immediately after use. * Do not allow polish to dry inside the fibres. * Avoid using fabric conditioner. * Allow the pad to dry naturally before storing. * Store in a clean, dry location. These simple maintenance steps help preserve the pad's absorbency and ensure consistent performance throughout its lifespan. Professional Results Every Time The finishing stage of floor maintenance is often the most important. Uneven polish application can leave visible lap marks, dull patches or excessive gloss variation. The Bona Microfiber Applicator Pad has been designed to eliminate these issues by providing: * Smooth application * Uniform polish thickness * Reduced streaking * Better control * Faster coverage Its wide application surface measures approximately **430 130 mm**, allowing users to cover larger floor areas with fewer passes while maintaining excellent control around furniture and room edges. Ideal for Domestic and Commercial Floor Care Whether you're maintaining your home's wooden flooring or regularly polishing commercial premises, the Bona Microfiber Applicator Pad offers dependable professional performance. Ideal applications include: * Family homes * Apartments * Offices * Hotels * Schools * Retail stores * Healthcare facilities * Restaurants * Commercial cleaning contractors * Professional flooring installers Its durability and ease of use make it equally suitable for occasional home maintenance and regular commercial floor care programmes. Saves Time and Product Because the microfibre fibres distribute polish evenly, less product is required to achieve excellent results. Compared with ordinary cloths or low-quality applicators, the Bona Microfiber Applicator Pad helps: * Reduce polish consumption * Improve application speed * Minimise streaks * Reduce waste * Produce a more consistent finish The combination of absorbency, controlled release and wide coverage makes it one of the most efficient ways to apply Bona floor care products. Simple to Use Using the Bona Microfiber Applicator Pad is straightforward: 1. Attach the pad securely to your Bona Floor Mop or compatible hook-and-loop mop frame. 2. Ensure the floor has been thoroughly cleaned and completely dry. 3. Apply Bona Floor Polish or Bona Refresher directly onto the floor in small sections. 4. Spread the product evenly using smooth overlapping strokes. 5. Allow the treatment to dry according to the product instructions. 6. Remove the pad immediately after use and wash thoroughly. Following these steps helps ensure an even, professional finish with minimal effort. Durable Construction You Can Trust Like all Bona floor care accessories, the Microfiber Applicator Pad has been designed to meet the high standards expected by flooring professionals. Manufactured from premium microfibre materials, it maintains its shape, softness and performance even after repeated washing. Its robust construction resists wear while continuing to deliver excellent polish application over hundreds of maintenance cycles. For homeowners and professional contractors alike, this durability provides exceptional long-term value compared with disposable alternatives. Key Features * Premium professional-quality microfibre applicator pad. * Designed specifically for applying Bona Floor Polish and Bona Refresher products. * Highly absorbent for smooth, even product distribution. * Soft, non-abrasive fibres protect delicate floor finishes. * Suitable for wood, laminate, vinyl, LVT, tile, stone and other sealed hard floors. * Compatible with all Bona Floor Mops and most hook-and-loop mop systems. * Quick and secure Velcro-style attachment. * Machine washable and reusable up to 300500 times. * Approximate size: 430 130 mm. * Reduces streaking and product waste. * Suitable for domestic and commercial use. * Easy to clean and maintain. ## Why Choose the Bona Microfiber Applicator Pad? When it comes to achieving a flawless floor finish, the quality of your applicator matters just as much as the polish itself. The Bona Microfiber Applicator Pad has been purpose-built to deliver smooth, even application of Bona floor polishes and refreshers while protecting delicate floor surfaces from scratches and streaks. Its premium microfibre construction, excellent absorbency and reusable design make it a reliable, cost-effective solution for maintaining beautiful floors. Whether you're polishing hardwood, refreshing laminate, protecting luxury vinyl or maintaining stone and tile floors, this professional-grade applicator pad helps you achieve consistent, high-quality results with less effort and less waste. Durable, machine washable and compatible with the full range of Bona floor mops, the Bona Microfiber Applicator Pad is an essential accessory for anyone who wants to keep their floors looking their absolute best.

3 Bona Hardwax Oil Premium Hard Wax Oil for Durable, Natural Wood Floor Protection Protect and enhance the natural beauty of your wooden floors with **Bona Hardwax Oil**, a professional-quality hard wax oil designed to provide long-lasting protection, excellent durability and a beautiful natural finish. Combining the benefits of traditional oils and modern hard wax technology, Bona Hardwax Oil penetrates deep into the timber while creating a hard-wearing protective surface that resists dirt, moisture, scuffs and everyday wear. Ideal for both domestic and commercial applications, Bona Hardwax Oil is designed for use on unsealed or freshly sanded solid and semi-solid wood floors. It delivers the warm, authentic appearance of an oiled floor while providing the enhanced protection required for busy environments. Easy to apply, simple to maintain and trusted by flooring professionals worldwide, Bona Hardwax Oil is an excellent choice for anyone looking to protect timber flooring while preserving its natural character. Natural Beauty Combined with Tough Protection Wood flooring adds warmth, elegance and character to any interior, but untreated timber can quickly become vulnerable to moisture, dirt and daily wear. Bona Hardwax Oil has been developed to protect wooden floors while allowing the natural grain, texture and beauty of the timber to remain visible. Unlike traditional varnishes that create a thick surface coating, hard wax oil works by penetrating into the wood fibres while leaving a protective wax layer on the surface. This creates a natural-looking finish that feels comfortable underfoot while providing excellent resistance against everyday use. The result is a beautiful floor with: * A natural oiled appearance * A warm, enhanced timber finish * Excellent resistance to wear and scuff marks * Water and dirt-repellent protection * Easy future maintenance Bona Hardwax Oil is ideal for homeowners and professionals who want the authentic appearance of an oiled floor without compromising on durability. Suitable for Solid and Semi-Solid Wood Floors Bona Hardwax Oil is specifically designed for use on unsealed wooden floors and freshly sanded timber surfaces. It is suitable for many different wood flooring applications where a durable, natural finish is required. Suitable applications include: * Solid wood flooring * Engineered wood flooring * Timber floors * Wooden staircases * Residential wood floors * Commercial timber flooring Before application, the surface should be properly prepared, clean, dry and free from dust, oils or existing finishes. Bona Hardwax Oil should not be applied over sealed, lacquered or polished surfaces, as the oil needs direct contact with the timber to absorb correctly. Water and Dirt Repellent Protection One of the biggest advantages of Bona Hardwax Oil is its ability to protect wood flooring from everyday challenges such as spills, dirt and heavy foot traffic. Once cured, the oil creates a protective surface that helps repel: * Water * Dirt * Everyday stains * Foot marks * Scuffs * General household wear This makes it particularly suitable for kitchens, hallways, dining areas and commercial spaces where floors are exposed to frequent use. The protective finish helps prevent contaminants from penetrating deeply into the timber, making routine cleaning easier and helping the floor maintain its attractive appearance for longer. Excellent Wear and Scuff Resistance Busy floors need a finish that can withstand constant use. Bona Hardwax Oil has been engineered to provide excellent resistance against wear and scuffing, making it suitable for both residential properties and commercial environments. The durable hard wax surface helps protect timber from: * Shoe traffic * Furniture movement * Everyday abrasion * Minor scratches * General deterioration For increased protection, Bona recommends applying two coats of Hardwax Oil to create a stronger, more resilient finish. Easy Application for Professional Results Bona Hardwax Oil is designed to be straightforward to apply, making it suitable for professional flooring contractors as well as experienced DIY users. The application process involves: 1. Ensure the timber surface is clean, dry and dust-free. 2. Prepare the wood correctly by sanding if required. 3. Apply a thin, even coat of Bona Hardwax Oil using a suitable applicator such as a roller, brush, microfiber roller or stainless-steel trowel. 4. Allow the first coat to dry fully. 5. Apply a second coat for enhanced protection where required. 6. Allow sufficient curing time before returning the floor to normal use. The oil should not be diluted and should be applied evenly without over-saturating the floor. Correct preparation and application are essential for achieving the best possible finish. Fast Drying and Efficient Coverage Compared with many traditional floor oils, Bona Hardwax Oil offers efficient application and practical drying times. Under normal conditions, the product can typically be recoated after approximately 68 hours, with light use possible after around 18 hours. Full curing takes approximately 10 days, allowing the finish to reach maximum durability. With coverage of approximately **2024m per litre per coat**, Bona Hardwax Oil provides excellent value and efficient performance for both small domestic projects and larger flooring installations. Easy Maintenance and Long-Term Care One of the key benefits of an oiled floor is that maintenance is simple. Unlike lacquered floors that may require complete sanding and refinishing when damaged, oiled floors can often be refreshed or repaired locally. To maintain a Bona Hardwax Oil finished floor: * Clean regularly using suitable wood floor cleaning products. * Avoid excessive water when cleaning. * Remove spills promptly. * Use protective pads under furniture. * Refresh the surface periodically with suitable maintenance products. Regular maintenance helps preserve the natural beauty of the timber and extends the lifespan of the protective finish. Ideal for Residential and Commercial Flooring Bona Hardwax Oil provides professional-quality protection suitable for a wide range of environments. Perfect for: * Homes * Apartments * Offices * Restaurants * Boutique shops * Hotels * Commercial buildings * High-quality residential developments Its combination of natural appearance, durability and ease of maintenance makes it a popular choice for designers, architects, flooring installers and homeowners who want a premium timber finish. Natural Finish Options Bona Hardwax Oil is available in different sheen levels, allowing you to achieve the desired appearance for your flooring project. Finish options include: * Extra Matt * Matt * Silk Matt These finishes allow the natural character of the wood to remain the focus, from a contemporary ultra-natural look to a slightly enhanced satin appearance. ## Environmentally Considered Floor Protection Modern flooring solutions need to balance performance with responsible product development. Bona Hardwax Oil is based on modified vegetable oils and waxes, providing a durable protective solution while maintaining a more natural approach to timber finishing. The product is also free from cobalt and ketoximes and is suitable for applications where a lower-emission indoor environment is important. Key Features * Premium hard wax oil for wooden floors. * Suitable for solid and semi-solid wood flooring. * Creates a natural oiled appearance. * Provides durable protection against wear and scuffs. * Water and dirt repellent surface. * Easy to apply and maintain. * Suitable for residential and commercial use. * Excellent coverage of approximately 2024m per litre. * Available in multiple sheen levels. * Can be locally repaired and refreshed. * Suitable for floors with underfloor heating. * Made from modified vegetable oils and waxes. * Free from cobalt and ketoximes. Why Choose Bona Hardwax Oil? For anyone looking to protect a beautiful wooden floor while maintaining its natural appearance, Bona Hardwax Oil offers the perfect combination of beauty, durability and practicality. It enhances the character of timber while creating a hard-wearing protective layer capable of handling everyday life. With its excellent resistance to dirt, moisture and wear, easy maintenance requirements and professional-quality performance, Bona Hardwax Oil is a trusted solution for both homeowners and flooring specialists. Whether you are restoring an existing timber floor or finishing newly sanded wood, Bona Hardwax Oil provides a durable, natural and long-lasting finish that allows your flooring to look its best for years to come.