East-West Guitars
Quality Replacement Parts
-
Caig DeoxIT D5S-6-LMH, Contact Cleaner & Rejuvenator
3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/caig-deoxit-d5s-6-lmh-contact-cleaner-rejuvenator/ The perfect solution for keeping your guitar and amp pots, faders, switches, tube sockets and much much more clean and rejuvanated. DeoxIT D-Series Contact Cleaner & Rejuvenator Part No. D5S-6-LMH 5 Ounce can Original Low-Med-High Adjustable Valve Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes). Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible. Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N. ________________________________________ More than a Contact Cleaner . . . Improves & Protects Connections! DeoxIT D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT dissolves the contamination and protects the surface. For reference, DeoxIT has approximately 20% cleaning action. KEY FEATURES: Improves Conductivity Deoxidizes, Cleans and Preserves Reduces Intermittent Connections Reduces Arcing & RFI Reduces Wear & Abrasion * Temperature Range, -34 C (-29 F) to +200 C (400 F) * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
-
DeoxIT Fader Spray F5S-H6, 5% solution, 142 g (182 mL)
3 Can be purchased direct from my website at the following link>> https://www.eastwestguitars.com/product/deoxit-fader-spray-f5s-h6-5-solution-142-g-182-ml/ DeoxIT Fader F-Series is a precision lubricant and treatment for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT Fader layer preventing contact with the plastic membrane. For reference, DeoxIT Fader F-Series has approximately 1% cleaning action. KEY FEATURES: Formulated for Conductive Plastics/Controls Maintains Optimum Signal Quality Replenishes Lubrication Lost Maintains Tactile Feel Reduces Wear & Abrasion Temperature Range, -26 C (-15 F) to +150 C (302 F) DeoxIT Fader F-Series Moving Contact Lubricant for Conductive Plastic Faders and Controls Part No. F5S-H6 Spray: Using Adjustable Low-Med-High Valve Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes). Formulation: 5% DeoxIT Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible. Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part No. FN5S-2N. Need more tactile feel, use the DeoxIT Fader Grease after cleaning with DeoxIT Fader F-Series. Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).
-
Caig DeoxIT D5S-2 LMH, Contact Cleaner & Rejuvenator
3 *Sold loose, blister pack not included. The perfect solution for keeping your guitar and amp pots, faders, switches, tube sockets and much much more clean and rejuvanated. DeoxIT D-Series Contact Cleaner & Rejuvenator Part No. D5S-6-LMH 0.85 Ounce can Original Low-Med-High Adjustable Valve Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes). Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible. Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N. ________________________________________ More than a Contact Cleaner . . . Improves & Protects Connections! DeoxIT D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT dissolves the contamination and protects the surface. For reference, DeoxIT has approximately 20% cleaning action. KEY FEATURES: Improves Conductivity Deoxidizes, Cleans and Preserves Reduces Intermittent Connections Reduces Arcing & RFI Reduces Wear & Abrasion * Temperature Range, -34 C (-29 F) to +200 C (400 F) * NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended; Manufacturer Disclaimer
-
DeoxIT Fader Spray, FN5S-2N (Non-Flammable, NO-DRIP) 40ml
3 Can be purchased direct from my website at the following link>> https://www.eastwestguitars.com/product/caig-deoxitfader-spray-fn5s-2n-non-flammable-no-drip-40ml/ DeoxIT Fader F-Series Moving Contact Lubricant for Conductive Plastic Faders and Controls Part No. FN5S-2N Mini-Spray: Using Low-Med-High Adjustable Valve Applicator: Non-Flammable Spray, provides precise control and application of DeoxIT Fader. Quick-Dry, Non-Drip Solvent. Formulation: 5% DeoxIT Fader (active ingredient), 75% Solstice PF (carrier solvent), 20% propellant Use: Solvent evaporates quickly, providing precise control, no dripping and overspray. Is ideal for applying on delicate connectors and components on and in equipment. Notes: Use when over spray is an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). Will not swell rubber. For more flushing action and non-critical applications, we recommend Part Nos. F5S-H6. Need more tactile feel, use the DeoxIT Fader Grease after cleaning with DeoxIT Fader F-Series. Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray). DeoxIT Fader F-Series is a precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT Fader layer preventing contact with the plastic membrane. For reference, DeoxIT Fader F-Series has approximately 1% cleaning action. KEY FEATURES: Formulated for Conductive Plastics/Controls Maintains Optimum Signal Quality Replenishes Lubrication Lost Maintains Tactile Feel Reduces Wear & Abrasion Temperature Range, -26 C (-15 F) to +150 C (302 F)
-
Caig DeoxIT Fader Lube, (Squeeze Tube) 2ml, 100% solution
3 You can purchase direct from my website at the following link>> https://www.eastwestguitars.com/product/caig-deoxit-fader-lube-squeeze-tube/ DeoxIT Fader F-Series Moving Contact Lubricant for Conductive Plastic Faders and Controls Part No. F100L-L2C: 100% Liquid, No solvents, 2.0 mL Applicator: Squeeze Tube, provides no flushing action, applies 100% DeoxIT Fader. Ideal for OEMs or include in service kit. Formulation: 100% DeoxIT Fader. Use: When contact and connectors are easily accessible. No flushing action. Notes: Use when over spray is an issue and on sensitive materials. Formulation safe on plastics. On easily accessible surfaces, recommend wiping off excess, leaving a thin layer. Need more tactile feel, use the DeoxIT Fader Grease after cleaning with DeoxIT Fader F-Series. Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray). DeoxIT Fader F-Series is a precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT Fader layer preventing contact with the plastic membrane. For reference, DeoxIT Fader F-Series has approximately 1% cleaning action. KEY FEATURES: Formulated for Conductive Plastics/Controls Maintains Optimum Signal Quality Replenishes Lubrication Lost Maintains Tactile Feel Reduces Wear & Abrasion Temperature Range, -26 C (-15 F) to +150 C (302 F)