3 FBT V64 Padded Cover 59- JMaxX 114A 14" + 1" Active Loudspeaker - 900W RMS The JMaxX 114A features a 14" LF woofer with 2" voice coil 1" exit throat HF compression driver with 1.4" voice coil 700W RMS LF, 200W RMS HF DSP with 4-EQ pre-sets all in an incredibly lightweight gas injected moulded polypropylene cabinet. 132 dB SPL. PRODUCT DESCRIPTION Processed 2-way active loudspeaker 700W + 200W 132 dB SPL (peak) The new FBT JMaxX 114A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs. With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 14-inch JMaxX 114A is equipped with FBTs latest 90 x 60 HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies. Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, the JMaxX 114A is actually four loudspeakers in one. Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing. The JMaxX 114 A features FBTs latest generation lightweight 700W + 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion. And a unique 14 Inch Low frequency driver. The 14" Driver fits inside a cabinet the size of a 12" Cabinet yet performs as good as a conventional 15". This unique speaker. The result is an amazingly compact speaker with all the power and clarity of a much larger speaker and weighing Just 16.5Kg this Speaker is a dream to transport. XLR inputs and outputs, volume control, the EQ presets and filters, and ground lift switch are all conveniently located on a clearly laid out rear panel, making loudspeaker setup and operation intuitive and consistently repeatable. The JMaxX versatility is further underscored by the many mounting and fixing options that the ergonomically styled cabinets provide. Mounting in fixed installations is made easy using the M10 suspension points or wall bracket flange plates, while portable use is facilitated by the built-in 35mm pole mount socket. Theres no need for separate stage monitors, as JMaxXs cabinet profiles are designed with 14, 40, and 55 wedge angles, and when used with the specific floor monitoring EQ presets, will ensure that performers hear themselves with ultimate clarity. Weighing just 14Kg and Packing a genuine 900 Watts RMS The JMaxX 114A is setting a new standard in compact affordable lightweight speakers. KEY FEATURES 14" LF woofer with 2.5" voice coil 1" exit throat HF compression driver with 1.4" voice coil Frequency response from 45Hz to 20 kHz Extremely lightweight: only 16.5Kg 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35mm (1.3/8) top-hat speaker stand socket, wall bracket mount flange plate 90H x 60V constant directivity horn Stage monitor angling facility with 12, 40 or 55 taper SPECIFICATIONS Configuration:2 Way Frequency response:45Hz - 20kHz Low frequency woofer:14" (2.5" VC) High frequency driver:1" (1.4" VC) Maximum SPL cont/peak:132 dB Dispersion:90 x 60 Input connector:XLR + 6.3mm Jack Net Weight:14kg Built-in amplifier LF/HF:700w/200w Power cord:5m IEC

3 FBT V63 Padded Speaker Cover 55 ProMaxX 110A 10" + 1" Active Loudspeaker with LCD display and DSP - 900W RMS ProMaxX 110a is an active speaker equipped with a 10' custom FBT speakers complete with a 1" B&Cs compression driver 900w RMS HF - 90H x 60V disperssion - Designed, Engineered and Manufactured in Italy PRODUCT DESCRIPTION With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic. Equipped with custom FBT speakers complete with B&Cs renowned compression driver technology,PROMAXX combines true made-in-Italy quality and style. At its heart is a purpose-built FBT amplifier module with a switch-mode power supply. For the low frequency section, 700W RMS is driven via a highly efficient Class-D topology, boasting extremely low THD. For HF, meanwhile, 200W RMS is delivered by a Class-H / AB design chosen to ensure the highest definition of audio performance at high frequencies. Also onboard is a powerful digital signal processing (DSP) platform made available to users of all levels thanks to an intuitive graphical user interface. Located on the rear of the enclosure, the menu-driven system is navigated via a single rotary control with push-to-select functionality. Users can choose between 6 equalizer presets, each carefully designed by FBT engineers to ensure that every application is catered for (see below). Additionally, 2 preset slots are available for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 10 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance, The PROMAXX feature-set is matched by the enclosures versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet. Presets for every occasion PROMAXX offers 6 presets to cater for a broad variety of uses, each crafted by FBT engineers. Employing powerful DSP, the presets ensure reliability while eliminating distortion. ORIGINAL / LIVE The renowned, smooth FBT sound VOCAL A special EQ setting to maximise speech intelligibility DJ Designed to keep the energy high and your audience dancing TOURING The reliability and the roar of the industrys most popular touring systems LOUDNESS The ultimate preset for listening at a medium or low volume WARM A special setting to emphasise full-bodied, low-mid frequencies. KEY FEATURES 2-way, bi-amplified, bass reflex design cabinet Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies Digital signal processor with graphic display Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 2 x M10 suspension points, 35 mm (1,3/8) top-hat speaker stand socket, wall bracket mount flange plate 90H x 60V constant directivity horn Front of House or Stage Floor Monitor: with 12, 40 and 55 monitoring angles 250mm (10") LF woofer with 50mm (2") voice coil, custom made for FBT 25mm (1") throat exit B&C HF magnet compression driver with 34mm (1.4) voice coil Frequency response from 58Hz to 20KHz Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance Extremely light only 10.3kg/22.70lb SPECIFICATIONS Configuration:2 Way Frequency response:58Hz - 20kHz -6dB Low frequency woofer:10 High frequency driver:1 Maximum SPL cont/peak:124/131dB Dispersion:58Hz - 20kHz -6dB Input impedance:22kOhm Input connector:XLR/Jack Combo socket with XLR link out, RCA stereo input Net Dimension (WxHxD):320 x 550 x 275mm Net Weight:10.3kg Transport Dimension (WxHxD):400 x 630 x 360mm Transport Weight:12.8kg AC Power requirements:640VA Built-in amplifier LF/HF:900w (700w LF + 200w HF) Built-in amplifier peak LF/HF:1800w (1400w LF + 400w HF) Power cord:5m Built in amplifier:900w (700w LF + 200w HF) Built in amplifier peak:1800w (1400w LF + 400w HF) Maximum SPL continuous/peak:124/131dB Dispersion (HxV):90 x 60

3 X-LITE 110A 10" Powered Speaker with Built-in Bluetooth The FBT XLITE 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected moulded polypropylene cabinet construction. Available in black finish, the FBT XLITE 110A series speakers provide excellent sound and an elegant design for portable sound and fixed installation. PRODUCT DESCRIPTION The FBT XLITE 110A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 110A series speakers provide fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT XLITE 110A cabinet also allows use as a powered floor stage monitor. The FBT XLITE 110A is two way design incorporating a 10 low frequency woofer and 1 HF compression driver coupled to a 90H x 60V constant directivity horn. With a frequency range of 58Hz - 20kHz the FBT XLITE 110A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 127dB. The bi-amplified FBT XLITE 110A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two XLR inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 110A speaker to be surface mounted on walls or ceilings. A standard 35mm speaker stand socket allows the FBT XLITE 110A to be mounted on speaker stand KEY FEATURES 2 way bi-amplified bass reflex system Polypropylene moulded enclosure Custom 10" woofer (LF) / 2.5" voice coil 1" throat / 1.4" voice coil HF compression driver 1200w / 300w Built-In amplifier (LF / HF) Bluetooth 5.0 3-Channel mixer 4 DSP Presets 30 degrees & 45 degrees monitor tapers Universal switch mode power supply 100-240 VAC M10 rigging points Configuration:2 Way Frequency response:58Hz - 20KHz Low frequency woofer:10" - 2.5" VC High frequency driver:1" - 1.4" VC Maximum SPL cont/peak:123/127 dB Dispersion:90 x 60 Input impedance:22 Input connector:XLR IN/OUT Net Dimension (WxHxD):300 x 536 x 301.5 Net Weight:13 KG Transport Dimension (WxHxD):370 x 615 x 380 Transport Weight:14.8 KG Built in amplifier peak:LF 1200w HF 300w

3 Fonestar Force X12 DSP -12 350watt RMS Active Speaker with Built in DSP and Bluetooth.

3 1x FBT Vertus CS-1000 Compact Line Array System 5 Year warranty Demo today at Sound Lease Ballymount, FBT Protective Cover available 59. euros each COMPACT LINE ARRAY INTEGRATED SYSTEM 600W + 400W RMS 129 DB SPL At Pro Light + Sound 2016, FBT is announcing the launch of the VERTUS CS1000 compact line array, the latest addition to the companys highly popular VERTUS range. Created as a no-compromise choice for both live performers and installers, the VERTUS CS1000 compact line array combines maximum performance with a modular, scalable approach. Its lightweight but sturdy construction blended with FBTs distinctive engineering and elegance has delivered a system that can be deployed on stage within minutes, or discreetly integrated into the most delicate of decors to provide high-quality sound and controlled directivity. A bi-amplified design, the system comprises a long excursion 12 bass reflex subwoofer and a passive mounted satellite, linked via a Neutrik SPEAKON connector and equipped with six full-range neodymium 3 drivers. Onboard the subwoofer is a Class-D, two channel amplifier, complete with switch-mode power supply, delivering 600W RMS to the subwoofer and 400W RMS to the satellite, both of which are housed in birch plywood enclosures. For ease of use, a storage compartment is provided within the subwoofer enclosure to securely house both the satellite speaker and its supplied mounting pole for storage and transport. A dedicated locking system holds all of the equipment in place. As with all FBT products, graceful but effective engineering is at the heart of the VERTUS CS1000, as exemplified by the mounting pole. Comprised of three sections, the pole allows users to alter the height of the satellite to suit their requirements, while a custom joint provides continuous vertical adjustment to ensure precise coverage in every venue. No listener is left untouched by the VERTUS CS1000 the slim proportions of the satellite facilitate a wide horizontal dispersion of 110, while the precision placement of the six 3 drivers to form a J-array creates a vertical dispersion of 30 (+10 / -20). Need more power? The VERTUS CS1000 takes a modular approach in that two systems can be used in a dual configuration to form a totally coherent and much more powerful solution. By stacking the two subwoofers and locking the two satellites together end-to-end (via optional hardware), the maximum SPL of the overall system is raised by 6dB. Coverage is also extended although the horizontal dispersion remains consistent, vertical dispersion increases to 40 (+20 / -20) Other features ensure ease of use and a rugged build quality. The subwoofer is equipped with aluminum handles complete with a rubber insert to guarantee a comfortable grip transporting the entire system, including the subwoofer, satellite, mounting pole, joint and all cables, is both convenient and comfortable. The fanless amplifier module is protected by diecast aluminum, while onboard DSP offers a choice of eight dedicated presets, each one shaped by FBTs long experience in creating proprietary algorithms to suit every requirement. Finally, the VERTUS CS1000 is compact in dimension but big on sound. The volume of the satellite can be adjusted in accordance with the subwoofer in 8 steps between -4.5 / +5dB range, while a selectable high-pass filter ensures optimum reproduction. And as your requirements grow, the VERTUS CS1000 compact line array will grow with you simply combine four systems in a two per-side stereo configuration to achieve a remarkable 8.000W peak. 2-way speaker system Subwoofer with a custom 12 (320mm) long excursion speaker with a 2.5 (64mm) voice coil 6 x full-range, 3 (70mm) neodymium high efficiency custom woofers with 0.75 (20mm) voice coils Frequency response of 40Hz to 20KHz Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively Built-in DSP with eight presets to suit every application Variable volume between -4.5 / + 5 dB in 8 steps Control Panel with master volume, presets, satellite volume, HPF, and LED status Input and link via XLR and Neutrik SPEAKON for satellite connection Dispersion 110 (H) x 30 (V) Modular design allowing two systems to be configured as one single solution via optional accessories Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted. Ideal for both live applications and fixed installations Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side) Code: 40621 Built-in amplifier LF/HF: 600/400 W RMS Built-in amplifier peak LF/HF: 1200/800 W Frequency response: 40Hz - 20KHz -6dB Low frequency woofer: 12 - 2.5 coil inch High frequency driver: 6 x 3 - 0.8 coil neodymium inch Maximum SPL cont/peak: 125/129 dB Dispersion: 110 x 30 H x V Input impedance: 22 Kohm Crossover frequency: 180 KHz Ac power requirements: 640 VA Input connector: XLR with loop Power cord: 5/16.4 mm/inch Net Dimension (WxHxD): satellite 105x530x120 / 4.13x20.86x4.72 Subwoofer 565x373x450 / 22.24x14.68x17.71 mm/inch Net weight: Satellite 3.5/7.71 Subwoofer 22.4/49.38 kg/lb Transport Dimension (WxHxD): 695x473x580 / 27.36x18.62x22.83 mm/inch Transport weight: 33.5/73.85 kg/lb Switch mode power supply Neodymium Woofer Digital processor

3 12 Passive monitor speaker with carpet covering. Sense stage monitoring speakers feature Coaxial HF and LF units for increased sensitivity and true production of tone, with NdFeB magnetic HF compression drivers and a 43 degree monitoring angle all in a sleek, compact, lightweight design. Active models feature Dual Class D amplifier circuit and DSP processing. Available in a carpeted enclosure or a durable paint finish (+ models).

3 HYPER-PRO 12ACX 12 1600W Peak 2-way Powered Loudspeakers with DSP The Bi-Amplified Active speakers of the HYPER-PRO ACX series are part of the high range of SOUNDSATION Pro Audio products. Peak powers of 1600 W and 1800W respectively for 12 and 15 models, selected transducers, CELESTION compression drivers, powerful DSP: all the ingredients cleverly combined to offer the best even to the most demanding professionals. HYPER-PRO ACX series 12 and 15 woofers sound punchy and loud; the 1.4 driver lets them sound crystal clear. Sound control via the DSP is really simple. By pressing the PRESET switch you can choose between 4 audio programs (LIVE, DJ, SPEECH, MONITOR); the character of the sound will change and the corresponding LED will show the selected mode. The rear panel, organized in a very simple way and with separately controllable inputs, allows the choice of devices to be connected as a microphone, a mixer, an instrument, a CD player, a smartphone etc. In the three panel sections, input levels can quickly be set with gain controls independently of each other. SPECIFICATIONS KEY FEATURES Bi-Amped Active Speaker 1600W Peak Power AmplifierClass-D (low-frequencies); Class-AB (high-frequencies) Celestion 1.4" Compression Driver 4-Preset DSP (Live, DJ, Speech, Monitor) Balanced MIC / Line XLR input with Thru XLR output, Line Stereo input with 2x "jack, Stereo input with Mini-Jack and RCA, all with independent level controls Link output with Mono / Stereo selection Blue Front LED with On/Off Switch Sturdy Polypropylene Enclosure with black anti-scratch paint Flyable3 x M10 (2 on Top, 1 on Rear) Handles1 on top, 2 on sides Dual pole mountStandard 36 mm, 0 and 7 SPECIFICATIONS Frequency Response50Hz - 20kHz / -10dB Max SPL134 dB Low-freq. Transducer12" Woofer High-freq. TransducerCelestion 1.4" Compression Driver Coverage90 x 90 Low-Frequency AmplifierClass-D 350W RMS - 1400W Picco High-Frequency AmplifierClass-AB 50W RMS - 200W Picco AC Mains100-120VAC/220-240VAC Power Consumption (Average/Peak)800W / 1600W FuseT6.3AL 250V (100-120V) / T3.15AL250V (220-240V) DSP4 preset (Live, DJ, Speech, Monitor) Input Connections1x XLR connector, 2x 63mm Jack, 1x Mini-Jack, 1x RCA Pair Output Connectors1x XLR Thru Output (Input 1), 1x XLR Link Output with Mono/Stereo selection Housing MaterialPolypropylene GrilleSteel/1.2mm Flyable3 x M10 points (2 on top, 1 on rear) Handles2 on sides; 1 on top Dual tripod/pole holeStandard D36mm, 0 and 7 Speaker Size (WxHxD)362 x 597 x 347 mm Packing Size (WxHxD)405 x 645 x 395 mm Speaker Weight15.5 kg Carton Weight17 kg

3 NEW RELEASE- DEMO THESE AT SOUND LEASE BALLYMOUNT . HYPER-PRO 12 PLUS 12 2-Way Active Loudspeaker with DSP The new Hyper-Pro Plus speakers represent a new important stage in the evolution of the famous Hyper series of Soundsation. The power, audio quality and convenience of the previous models are now integrated with the functions which are essential for those who professionally use a speaker as a work tool. 700W continuous D-Class speakers, selected woofers and compression drivers, DSP for Crossover control, EQ, 2-Band Limiter, phase alignment and delay optimization of woofers and compression drivers. All this technology can ensure high performance and maximum audio quality in any use conditions. The control panel includes two XLR-Combo Mic/Line inputs, the Mix output and 4 Audio Programs (Music, Live, Monitor, Vocal) to quickly adapt the speaker to the main uses. The stylish and sturdy cabinet is designed to be installed vertically on the floor or on a 35mm pole/tripod, and also suspended horizontally or vertically thanks to the 4 M8 fixing points. SPECIFICATIONS KEY FEATURES 2-way Loudspeaker, Bass-Reflex Design 700W Continuous / 1400W Peak Class-D amplifier 90H x 60V Coverage DSP for Crossover, EQ and 2-Band Limiter Control, Phase and Time Optimization 4 EQ Presets (Music, Live, Monitor, Speech) 2 Mic-Line Combo Inputs and Balanced Mix Output On-off key for the Front LED 35mm Adapter for Pole or Tripod Stand 4 Fixing Points for M8 Eyebolts

3 ProMaxX 114A 14" + 1.4" Active Loudspeaker with LCD display and DSP - 900W RMS ProMaxX 114a is an active speaker equipped with a 14' custom FBT speakers complete with a 1.4" 2.5"VC B&Cs renowned compression driver Biamped: 700W RMS LF, 200W RMS HF.90H x 60V constant directivity horn 135.5dB SPL. Specially developed polypropylene cabinet and stylish full grille design. PRODUCT DESCRIPTION With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new PROMAXX by FBT represents the next step in the evolution of a portable sound classic. Equipped with custom FBT speakers complete with B&Cs renowned compression driver technology,PROMAXX combines true made-in-Italy quality and style. At its heart is a purpose-built FBT amplifier module with a switch-mode power supply. For the low frequency section, 700W RMS is driven via a highly efficient Class-D topology, boasting extremely low THD. For HF, meanwhile, 200W RMS is delivered by a Class-H / AB design chosen to ensure the highest definition of audio performance at high frequencies. Also onboard is a powerful digital signal processing (DSP) platform made available to users of all levels thanks to an intuitive graphical user interface. Located on the rear of the enclosure, the menu-driven system is navigated via a single rotary control with push-to-select functionality. Users can choose between 6 equalizer presets, each carefully designed by FBT engineers to ensure that every application is catered for (see below). Additionally, 2 preset slots are available for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 10 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance, The PROMAXX feature-set is matched by the enclosures versatility, with options for pole-mounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet. Presets for every occasion PROMAXX offers 6 presets to cater for a broad variety of uses, each crafted by FBT engineers. Employing powerful DSP, the presets ensure reliability while eliminating distortion. ORIGINAL / LIVE The renowned, smooth FBT sound VOCAL A special EQ setting to maximise speech intelligibility DJ Designed to keep the energy high and your audience dancing TOURING The reliability and the roar of the industrys most popular touring systems LOUDNESS The ultimate preset for listening at a medium or low volume WARM A special setting to emphasise full-bodied, low-mid frequencies. KEY FEATURES 2-way, bi-amplified, bass reflex design cabinet Biamped: 700W RMS LF, 200W RMS HF, power amplifiers in Class D for LF and in Class H/AB for HF with switch mode power supplies Digital signal processor with graphic display Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 2 x M10 suspension points, 35 mm (1,3/8) top-hat speaker stand socket, wall bracket mount flange plate 90H x 60V constant directivity horn Front of House or Stage Floor Monitor: with 12, 40 and 55 monitoring angles 3550mm (14") LF woofer with 64mm (2.5") voice coil, custom made for FBT 35mm (1.4") throat exit B&C HF magnet compression driver with 34mm (1.4) voice coil Frequency response from 45Hz to 20KHz Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance Extremely light only 17.4kg Compact Dimensions: ProMaxX 114A uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112A, but features our 14 LF Woofer for lower frequency SPL SPECIFICATIONS Configuration:2 Way Frequency response:45Hz - 20kHz -6dB Low frequency woofer:14" High frequency driver:1.4" Maximum SPL cont/peak:127/135.5dB SPL Dispersion:90 x 60 Input impedance:22kOhm Input connector:XLR/Jack Combo socket with XLR link out, RCA stereo input Net Dimension (WxHxD):402 x 644 x 345mm Net Weight:17.5kg Transport Dimension (WxHxD):800 x 642 x 800mm Transport Weight:54.5kg AC Power requirements:640VA Built-in amplifier LF/HF:900w (700w LF + 200w HF) Built-in amplifier peak LF/HF:1800w (1400w LF + 400w HF) Power cord:5m IEC Built in amplifier:900w (700w LF + 200w HF) Built in amplifier peak:1800w (1400w LF + 400w HF) Maximum SPL continuous/peak:127/135.5dB SPL

3 X-PRO 112MA X-PRO 112MA POWERED STAGE MONITOR A totally new member to the X-Series family, this dedicated plywood stage monitor offers the same FBT tone and reliability at a completely new price category. It offers all the power you would need in a compact and affordable box. PRODUCT DESCRIPTION The new X-PRO 112MA monitor is part of the wide range of the XPRO series, renewed with the redesign of all the electronics that allowed to increase the power and add important innovations. The control panel features a three-channel mixer with two microphone/line inputs, a stereo input and a dedicated channel for Bluetooth 5.0; two XLR inputs, stereo input, XLR output with CH1 or mix link selector, hp filter, two mic-line selectors, DSP preset selector, Bluetooth 5.0 with pairing led. The use of BLUETOOTH 5.0 (compatible with previous versions) for streaming audio from smartphone / tablet that allows the simultaneous recognition of two speakers with the possibility of controlling their volume remotely, in addition to the use of more performing speakers capable of generating a very high sound pressure, very low distortions and an incredibly natural sound. Also new is the power unit equipped with a switching power supply with automatic voltage change; an internal ventilation system, with intelligent control of the number of revolutions, allows the operating temperatures of the amplifier to be kept low, guaranteeing its silence. The XPRO 112MA speaker is built in plywood, equipped with two integrated handles; the stand insert allows its use also on a stand support or in any free standing situation. KEY FEATURES 2-way bi-amplified bass-reflect design Woofer custom 12" / 2.5 voice coil 1" throat / 1.4" voice coil HF compression driver 1200/300W HF class D amplifier Bluetooth 5.0 3 channels mixer 4 DSP presets Box in plywood with anti-scratch treatment Configuration:2 Way Frequency response:54Hz - 20KHz Low frequency woofer:12"- 2.5" coil High frequency driver:1" - 1.4" coil Maximum SPL cont/peak:24/129 dB Dispersion:80 Degrees Input impedance:22 kOhm Input connector:XLR IN/OUT JACK ST Net Dimension (WxHxD):550 x 320 x 467 Net Weight:16 Kg Power cord:5m Power Requirements:500W

3 2-way Coaxial Active speaker - 5" + 1" - 100Wrms+50Wrms The FBT CANTO 5CA features lightweight gas-injected polypropylene enclosures. Available in black or white finish, the FBT CANTO 5CA provides fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the FBT CANTO 5CA cabinet also allows use as a powered floor stage monitor. PRODUCT DESCRIPTION THE VOICE OF YOUR AUDIO INSTALLATION A family of loudspeakers built with the latest materials and components, a linear design but beautiful to the eye and touch. The name refers to the vocal purity, almost esoteric hi-fi, therefore highly professional. Destined to grow and expand over time. The Canto family expresses vocal purity, crystal clear sound, pursuit of perfection and technical condensation aimed at satisfying multiple possibilities of high quality audio installations. The linear Made in Italy design denotes the attention to detail behind each project. Through an in-depth study of both selected materials and acoustic characteristics, Canto is able to achieve optimal results in any environment: it is the new exciting series of audio speakers for installation. With moulded enclosures to avoid undesired resonance, the range includes terminal block In & Thru connectors and new custom coaxial transducers. Completely designed in FBT's R&D laboratories, the passive Canto series is also available with 70/100V line transformer for more versatile options in fixed installations, through a dedicated installation bracket for easy mounting and multi-angle adjustment capability and the 35mm top-hat stand socket wide range of dedicated accessories. CANTO 8CA, CANTO 8C, CANTO 5CA and CANTO 5CT models are made of sturdy gas-injected polypropylene, while CANTO 3 is made in ABS plastic. All models are available in black and white.

3 FBT IRELAND DEMO These Subs at Sound Lease Ballymount D12K524 Or Call 01-4509711 to arrange a Demo. PRODUCT DESCRIPTION VHA 118SN/SND - NEW Processed Bass Reflex Active Subwoofer - 1x18" - 2500Wrms - INFINITO compatible - Dante interface optional The design of the VHA118SND has produced a unique low-end module that is capable of generating extremely high SPL for prolonged periods. FBT HORIZON VHA 118SND is a direct radiation ground subwoofer, has 1 x 18" long excursion woofer with 4" coil and 2500W Class D amplification capable of 143 dB SPL. The bass reflex cabinet offers substantial energy down to 30Hz and is ideal for extending and reinforcing the low frequencies of the HORIZON VHA system. It has presets to create various configurations with cardioid directivity, where some subwoofers face rearwards from the audience to acoustically cancel the sound pressure behind the cluster. The enclosure, optimised with BEM-type acoustic simulations to reduce resonance and turbulence of the ducts, is built in 0,70" ( 18mm ) birch plywood with black plyuria finish, has six alluminum handles, predisposition for 4 wheels, two M20 stand sockets for horizontal or vertical use and 4 support points set up to accommodate accessories in ground stack configuration in conjunction with VHA 406ND and VHA 112SND models. The front of the speaker is covered with a powder coated perforated steel grille. The summit of the entire project is the new 2500W amplification module with built-in TCP/IP network interface. Based on OCA ALLIANCE AES70 standard, it communicates with FBT's INFINITO management suite remote control software and receives 24-bit 48-96kHz digital audio streaming from all devices compatible with Audinate's DANTE standard. The HORIZON VHA 118SND is equipped with intelligent forced ventilation and OLED display with encoder for parameter settings. A high-brightness blue front LED allows remote identification of the device also in daylight. KEY FEATURES Bass-reflex amplified subwoofer 460mm (18) high excursion B&C woofer with 100mm (4) coil Frequency response from 30Hz to 100Hz 2500Wrms class D amplifier with switching power supply Network interface TCP/IP - AES70 compatible Ethercon RJ45 input and output for daisy-chain Remote control by INFINITO System Management Suite OLED DISPLAY and encoder with PUSH for easy onboard control DANTE audio streaming 24bit 48-96KHz Neutrik PowerCON IN and LINK power connectors Box in 18mm (0.7) birch plywood with anti-scratch varnish Two M20 stand sockets and 4 FBT aluminum handles, predisposed for 4 x 100mm (4) swivel casters Integrated mechanics compatible with VHA406ND and VHA112SND for ground stack configurations. Extremely robust grid with protective fabric Ideal for reinforcing and extending the low range of the VHA system, it can only be used with VHA406ND or as an infra if present also the VHA112SND Configuration:Single Reflex Built-in Amplifier LF/HF:3500 Built-in Amplifier Peak LF/HF:5000 Frequency Response:30Hz Preset Dependent Low Frequency Woofer:1x 18" / 4" coil Maximum SPL Cont/Peak:137 / 143dB half space Dispersion:Omnidirectional Input Connector:2x XLR In / Out AC Power Requirements:650 VA Power Cord:5m Net Dimension (WXHXD):606 x 700 x 720mm Net Weight:65kg Transport Weight:75kg

3 View and Demo This FBT Speaker at our Ballymount Shop . 5 Year Warrenty. FBT Padded Covers Available. https://youtu.be/y_S5qIy0dAI Processed Compact Bass Reflex Active Subwoofer - 15" - 1200Wrms The FBT X-SUB 115SA , 1 x 15" bass-reflex design subwoofer, is the perfect low frequency extension and the ideal companion for the FBT X-LITE and FBT X-PRO series. Equipped with a 15\" (380mm) high excursion woofer and a 1200W RMS internal amplifier. It has a digital signal processor with 4 presets, allowing extensive customisation of low frequencies up to mid-high levels. The robust 15mm (0.59 inch) birch plywood box is specially designed to satisfy all installation requirements. X-SUB 115SA is equipped with an M20 stand support for mounting a satellite, and two aluminium handles, and offers the option of installing four 100mm wheels PRODUCT DESCRIPTION The FBT X-SUB 115SA provides the following performance criteria: frequency response of 42Hz to 120Hz @ -6dB, maximum SPL of 135 dB peak, 1200W Class D amplifier. The FBT X-SUB 115SA provides a DSP processor with 4 presets (2 responses with 2 different cut-off frequencies). The FBT X-SUB 115SA feature 0,59\" birch plywood construction with scratch resistant black paint finish with M20 top mounted stand adapter, two FBT design aluminium handles and four optional 100mm/3,93\" transport wheels. The control panel provides two channels with stereo combo XLR/jack in-outs, stereo XLR HP filter outs, level control, preset switch, 0/180 phase reversal switch, prt-lmt led indicators. KEY FEATURES Active subwoofer 15" woofer / 3" voice coil Frequency response 42Hz - 120Hz 4 DSP presets 1200W RMS Class D power amplifier 15mm / 0,59" birch plywood cabinet Optional 100mm / 3,93" transport wheels M20 stand pole mount

3 X-LITE 112A 12" Powered Speaker with Built-in Bluetooth The FBT XLITE 112A series speakers with integrated 3-channels mixer feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish, the FBT XLITE 112A series speakers provide excellent sound and an elegant design for portable sound and fixed installation. PRODUCT DESCRIPTION The FBT XLITE 112A is two way design incorporating a 12 low frequency woofer and 1 HF compression driver coupled to a 90H x 60V constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XLITE 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. The bi-amplified FBT XLITE 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 112A speaker to be surface mounted on walls or ceilings. A standard 1.38 speaker stand socket allows the FBT XLITE 112A to be mounted on speaker stand. KEY FEATURES 2-way bi-amplified system in bass reflex Polypropylene moulded enclosure Woofer custom 12 (LF) / 2,5 voice coil 1 throat / 1,4 voice coil HF compression driver 1200/300W built-in amplifier (LF/HF) Bluetooth 5.0 3-channels mixer 4 DSP presets 30 / 45 monitor taper Universal switching mode power supply 100-240 VAC M10 rigging points 4 DSP presets Configuration:2 Way Frequency response:50Hz - 20KHz Low frequency woofer:12" / 2.5" VC High frequency driver:1" - 1.4" VC Maximum SPL cont/peak:124 / 129 Dispersion:90 x 60 Input impedance:22 Input connector:XLR IN/OUT, Jack ST Net Dimension (WxHxD):356 x 619 x 357 Net Weight:16.3 KG Transport Dimension (WxHxD):440 x 700 x 445 Transport Weight:18.9 Built in amplifier:1200 / 300 LF/HF

3 View and Demo This FBT Speaker at our Ballymount Shop . 5 Year Warrenty. FBT Padded Covers Available. https://youtu.be/y_S5qIy0dAI X-SUB 118SA Processed Compact Bass Reflex Active Subwoofer - 18" - 1200Wrms The X-SUB 118SA offers a powerful solution where low end extension is required for fixed installation or portable sound at an excxellent price. PRODUCT DESCRIPTION The FBT X-SUB 118SA , 1 x 18" bass-reflex design subwoofer, is the perfect low frequency extension and the ideal companion for the FBT X-LITE and FBT X-PRO series. The FBT X-SUB 118SA provides the following performance criteria: frequency response of 38Hz to 120Hz @ -6dB, maximum SPL of 136 dB peak, 1200W Class D amplifier. The FBT X-SUB 118SA provides a DSP processor with 4 presets (2 responses with 2 different cut-off frequencies). The FBT X-SUB 118SA feature 0,70" birch plywood construction with scratch resistant black paint finish with M20 top mounted stand adapter, two FBT design aluminium handles and four optional 100mm/3,93" transport wheels. The control panel provides two channels with stereo combo XLR/jack in-outs, stereo XLR HP filter outs, level control, preset switch, 0/180 phase reversal switch, prt-lmt led indicators. KEY FEATURES Active subwoofer 18mm / 0,70" birch plywood cabinet 18" woofer / 3" voice coil 1200W RMS Class D power amplifier 4 DSP presets Frequency response 38Hz - 120Hz M20 top mount speaker stand socket Optional 100mm / 3,93" transport wheels Configuration:Bass Reflex Frequency response:38Hz - 120Hz (@-6dB) Low frequency woofer:18" / 3" Voice Coil Maximum SPL cont/peak:136dB Half Space Dispersion:Omnidirectional Input impedance:22 kOhm Input connector:XLR With Link Net Dimension (WxHxD):510 x 655 x 630 Net Weight:34KG Built in amplifier:1200W

3 The SC-615 is a compact, highly intelligible speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel bracket and screws ensure the units weatherproof capability. 15W Input (mobile mount, 10W). Low Impedance (8 ). Stainless steel brackets and hardware. Shock resistant aluminium oval horn. Unobtrusive off-white colour. Compliance with IP-65. Specification Rated Input15W (mobile mount use, 10W) Line Voltagen / a Rated Impedance8 Sound Pressure Level112dB, 1W / 1m at 500 to 2,500 Hz peak level). Frequency Response280 ~ 12,500Hz Sensitivity when used as Microphone(0 dB = 1 mW/10 dynes/cm 2) -22 dB at 1 kHz IP GradeIP65 PolarityHot; Black wire, com; White wire Operating Temperature-20 ~ +55C (must be free from dew condensation) FinishHorn flare: Aluminum, off-white, powder coating / Reflector horn and rear cover: ABS resin, off-white / Bracket, Screws and bolts: Stainless steel / Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length) Dimensions 222 (W) x 179 (H) x 234 (D) mm Weight1.1 kg Material Aluminium OptionSwivel bracket: YS-151S (Can be used instead of the supplied bracket.)