Browse categories

East-West Guitars 

Quality Replacement Parts

Member since:
17/04/2015
Last online:
13/12/2018
Location:
Rathfarnham, Dublin

Activity

Active:
204
Sold out:
28
Withdrawn:
89
Units sold:
833

Feedback Score [283]

  • Fender S-1 Potentiometer, Split Shaft, 250K, 0.25B Taper

    3 "Tone up" and modify your favorite guitar or bass with an S-1 Switch from Fender. Originally featured as an upgrade to American and American Deluxe Series guitars and basses in 2003, the S-1 switch allows a multitude of tonal options for your instrument. The S-1 switch features four "stages" and can be wired into a variety of configurations (SPST, DPDT for a coil-tap, or 4PDT for a dual hum bucking coil tap). Works great in conjunction with a 4-pole "Super" Switch. 250K split shaft design. Accepts push-on mounting knobs only. Switch knob and tip are also available in my shop. Made by CTS Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packagingShipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

    €28.95
  • Fender TBX Tone Control

    3 250K/1 Meg Ohm stacked and detented potentiometer. Original TBX tone control for most Strats and Teles. CTS manufactured, includes capacitor and comes in original Fender packaging. Some instruments have a unique tone circuit that features a TBX Tone Control (Patented). The TBX (which stands for Treble Bass Expander), is a dual concentric stacked tone pot. The pot has a detent in the middle position. From 0 to 5 (at the detent), the TBX functions like a normal tone circuit with filtration through a capacitor. Advancing the knob counterclockwise from the detent position gradually filters off high frequencies, like a standard tone control. Rotate the knob clockwise from the detent position, and you add presence and brightness by allowing the pickups' natural resonance to come through. UPC/EAN: 717669448011

    €15.95
  • V-Treb Variable Treble Bleed Circuit, Precision Music Technologies

    3 The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound. To lnstall: 1. Peal the adhesive tape backing and attach the V-Treb circuit to the back of the volume pot as shown or chose another location to mount the circuit to allow easy adjustment if the back of the volume pot can not be accessed for adjustment. 2. Solder the input and output terminals of the volume pot to the gold solder pads on the bottom of the V-Treb or run wires as shown if mounted remotely from the volume pot. 3.Connect original input and output wires from volume to the gold solder pads on the top of the V-Treb or pot as shown. To Adjust The V-Treb: Set the volume between 6 and 8. Then use a small screwdriver to adjust the orange bypass amount control to the desired amount of treble bypass. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. The V-Treb will not affect the tone when the volume pot is set to 10 (100% on) NOTE: Use a small flat head screwdriver and be careful not over turn or damage the trim pot. Get precise adjustment of tone as volume is reduced. Use with 250K & 500K pots - Single coils & Humbuckers. Improves audio taper roll off between 6 and 10. Will not affect tone at full volume. Mounts to any volume pot with included adhesive tape. Can also be remote mounted for easier adjustment. *Volume pot not included. Demo: https://www.youtube.com/watch?v=MYpjezFkIeM

    €12.95
  • Tube Amp Doctor 6V6GT-STR PREMIUM, Matched Vacuum Tubes

    3 *Buy two, you get a matched quartet 6V6GT-STR TAD PREMIUM Matched TAD 6V6GT-STR (aka. 7408 / 6V6GTY) PREMIUM tube Finally in production after 3 years of intensive research. This all new TAD 6V6GT-STR combines the exceptionally sweet characteristics of the NOS 6V6GT by RCA or of the GE 6V6GTY. It is a heavy duty 6V6GT tube, which can handle a higher plate current. This TAD 6V6GT-STR caters for a detailed and powerful tone and an abundance of sustain; characteristics you would only expect from the finest NOS 6V6GTs from the 50s and 60s. Even when pushed into saturation there are no harsh upper mids, which is frequently the case with other 6V6s. Sweet full-bodied tone with silky highs. We recommend the TAD 6V6GT-STR for all 6V6 applications where a powerful but sweet tone is desired; It works great in amps like the Fender -Tweed- Champs, Deluxe Reverb Amps, Vibro-Champ, Fender Champion 600 or the Univalve. This is also the perfect choice as a reverb driver for the Vibrokings and Dual Professionals. Q: When does a power tube become a Premium Selected power tube? A: All power tubes labeled Premium Selected have passed the following tests: -Plate Current (PC) and Amplification (TC) -Low Noise Test -Microphonic Test -Sonic Tests -Shock Tests -Listening Tests -Shorts & Leakage Tests Premium RT-Matching of Power Tubes Our Premium Matching is an exact matching of power tubes with identical Plate Current (PC) and Transconductance (TC). TAD Premium Selected tubes are guaranteed for a period of 6 months (according to terms of warranties) for the quality criteria mentioned above. RohS Compliant Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an un-used state and in the original packaging.

    Guitar Amps
    3 months ago 0 comments
    €50
  • Tube Amp Doctor EL84M (Military Grade) Premium Matched Tubes

    3 *Buy two, you get a matched pair *Buy four, you get a matched quartet EL84M TAD-Tubes, Premium Matched Your 1st Choice When Dependability is Your Major Goal! The TAD EL84M offers strong mids and defined bass response. Even, when played at lower volume or in a complex stage sound situation, your sound will prevail. This is the most reliable and longest-lasting military grade EL84 on the market and operates up to 10,000 hours. Unfortunately, this tube is not being produced anymore. Grab them, while they last! d= 22,5mm Due to its diameter of 22.5mm, the TAD EL84-M does not fit into older Marshall DSL401 and UK made VOX AC15 TBX amplifiers. The only tube which fits these amps is the EL84-EI. (ordering number: NN471) Q: When does a power tube become a Premium Selected power tube? A: All power tubes labeled Premium Selected have passed the following tests: -Plate Current (PC) and Amplification (TC) -Low Noise Test -Microphonic Test -Sonic Tests -Shock Tests -Listening Tests -Shorts & Leakage Tests Premium RT-Matching of Power Tubes Our Premium Matching is an exact matching of power tubes with identical Plate Current (PC) and Transconductance (TC). TAD Premium Selected tubes are guaranteed for a period of 6 months (according to terms of warranties) for the quality criteria mentioned above. RohS Compliant Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an un-used state and in the original packaging.

    Guitar Amps
    3 months ago 0 comments
    €30
  • Tube Amp Doctor ECC83 WA Preamp Tube (Premium Selected)

    3 ECC83 WA TAD Premium Selected Perfect V2 Preamp Tube!! Great Dynamics - Low Noise - Warm Tone!! The TAD ECC83 WA Selected provides a stunning warm tone, thick midrange and sweet natural harmonics. We designed it with a triple mica construction for low noise performance. Perfect for clean or moderate gain preamps as well as for high-gain amps from V2 position (for V1/Input stage the HIGHGRADE selection RT080 is recommended). Its great dynamics, low noise operation and balanced warm tone make the TAD ECC83 WA to be an excellent all-rounder with great value for money. - smooth top end - full gain - fat mid range - tight low end - very low microphony - low noise - balanced systems - triple mica construction - replaces: 12AX7, 12AX7A/WA/WB/WC, ECC83, 7025 The TAD ECC83WA Premium Selection is recommended for most applications for low microphony performance. For especially demanding input stages (V1) and for all applications demanding an extremely low microphony 7025 / ECC83 / 12AX7A type tube we recommend the RT080 TAD 7025WA HIGHGRADE. For "normal" applications the RT008 TAD ECC83 WA Selected can be used with same sound and gain structure. 1st choice tube to improve your: Boogie, Brunetti, Carrl, Diezel, Egnatorl, Engl, Fender, Hughes & Kettner, Koch, Laney, Marshall, Mesa, Orangel, Soldano, Trace Elliot, Two Rockl, VOX uvm. Q: When does a preamp tube become a Premium Selected tube? A: All preamp tubes labeled Premium Selected have passed the following tests: -Low Noise Test -Microphonic Test -Gain Test -Sonic Tests -Shock Tests -Listening Tests -Balanced Output Test TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties) for the quality criteria mentioned above. RohS Compliant

    Guitar Amps
    3 months ago 34 comments
    €14.95
  • Pure Tone Mono Output Jack (Nickel)

    3 The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds! The Pure Tone jack allows for increased current handling at 500 volts for high current applications. Tensioned design locks cable securely in place while the increased metal mass carries more signal. US Patent 9,680,264 Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an un-used state and in the original packaging

    €5.95
  • Switch Washer, Rhythm/Treble, Gold Lettering, for LP, SG etc

    3 This Rhythm - Treble Ring for Gibson Les Paul is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. All items must be returned in an unused state and in the original packaging.

    €3.95
  • Telecaster Wiring Harness with 4-way Switch Modification

    3 ***Reverse control harness available upon request for same price*** Fender Telecaster pre-wired control harness with 4-way switch mod. Position 2 of the 3-way Telecaster selector switch gives you both pickups wired in parallel; this is a standard wiring, and one of the classic Telecaster tones. But what if you need a fatter sound out of your Tele? The two outside switch positions on the Tele - which select the bridge or neck pickup individually - stay basically the same. But the middle position (both pickups together) wires the pickups in series rather than parallel. This produces a thicker, meatier sound, while still retaining the recognizable characteristics of a Tele. This is not a hum-cancelling combination, but it gives the increased power of a series link. The 4-way Tele switch will give you both sounds when you dial in the two pickups together - wired in parallel (standard wiring) and wired in series for a beefier fuller sound. **Can be supplied with crimp connectors for solderless hook up if required** Kit includes: Emerson PRO CTS Solid Shaft (audio taper/logarithmic) potentiometers (Matched) Oak Grigsby 4-Way Switch Switchcraft 1/4" Mono Input Jack with pre-wired harness using shielded braided wire enclosed with heat shrink tubing and also used on connections for strength (not pictured, see 3-way harness for better idea on location) Soviet Union NOS 0.047uf/47nF K42Y-2 Paper in Oil Capacitor (Tested within the 10% range) Choice of 50's Wiring (pictured) or Emerson Treble Bleed/Volume Mod Professionally soldered using vintage push-back wire. Switch Positions: 1. Bridge 2. Bridge & Neck in Parallel 3. Neck 4. Bridge & Neck in Series (Humbucker Type Fullness) **Switch Tip and Control Knobs Not Included** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €65
  • Fender Telecaster 3-Way Wiring Kit (50's Wiring Modification)

    3 ***Standard and Reverse control harness available upon request for same price*** (Standard Tele harness is supplied with an Emerson Treble Bleed/Volume Mod). Left-handed kits are 5 extra, please inquire first before purchase if you require this. Fender Telecaster pre-wired control harness with 50's Les Paul wiring modification. Two simple solder connections required. Drop in upgrade for Squire and Affinity Tele's. **Can be supplied with crimp connectors for solderless hook up if required** Kit includes: Emerson PRO CTS Solid Shaft (audio taper/logarithmic) potentiometers (Matched) Oak Grigsby 3-Way Switch Switchcraft 1/4" Mono Input Jack with pre-wired harness using twisted vintage push back wire enclosed with heat shrink tubing and also used on connections for strength Soviet Union NOS 0.047uf/47nF K42Y-2 Paper in Oil Capacitor (Tested within the 10% range) Professionally soldered using vintage push-back wire. **Switch Tip and Control Knobs Not Included** Whats so special about this 50s wiring? It affects your tone in three major ways: 1. The overall tone gets stronger, tighter, and more transparent. Its difficult to describe, but you might say its more in your face. 2. The typical treble loss that occurs when rolling back the volume is much less than with standard wiring. Both the volume and tone controls become more responsive, and they react more smoothly without the usual hot spots. Another bonus: By simply rolling back your guitar volume a bit, you can clean up an overdriven amp without getting lost in the mix. 3. The tone and the volume controls interact with each othersomething you might be familiar with from certain tweed-era Fender tube amps. When you change the volume, the tone changes a little bit as well, and vice-versa. This may be strange at first, but you only need a few minutes to get used to it. The 50s wiring exhibits much less treble loss that standard wiring because it follows a completely different curve, depending on the ratio of your pot. It works best with audio taper pots, preferably those with a 60:40 or 70:30 ratio. Smaller ratios like 80:20 or 90:10 limit this benefit and result in the typical on/off or bright/dull problem when using the controls. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. .

    €60
  • Fender Stratocaster Pre-Wired Harness

    3 Fender Stratocaster prewired control harness with Emerson Custom treble bleed modification for tone integrity at lower volumes. Drop in upgrade for Squire and Affinity Strats. Will fit any guitar with the classic Stratocaster configuration. **Can be supplied with crimp connectors for solderless hook up if required** Kit includes: Emerson PRO CTS 250K Split Shaft (audio taper/logarithmic) potentiometers (Matched) Emerson Custom treble bleed Oak Grigsby 5-Way Switch Switchcraft 1/4" Mono Input Jack with pre-wired harness using twisted vintage wire enclosed with heat shrink tubing and on terminals for strength Soviet NOS 0.047uf/47nF K40Y-9 Paper in Oil Capacitor (Tested within the 10% range) If you require a 22nF that can be arranged. 22 AWG vintage push-back wire, 18 AWG Buss Wire Modifications: Volume mod (Treble bleed) Bridge Tone Control Mod Normally there is no tone control for the bridge pickup on a Standard Strat wiring configuration. With this simple mod you can use the Mid tone control as your bridge tone control if you want to roll some of the highs off of that pickup. See my other listing 'Stratocaster Tone Split Kit' for another option for this. **Switch Tip and Control Knobs Not Included** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €70
  • Gibson Les Paul Premium Wiring Kit

    3 When quality and tone cannot be compromised, Emerson circuits are the answer. Everything you need to re-wire your Les Paul guitar yourself or for your upgrade project. May fit Epiphone and other Far Eastern made guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are made in USA by Emerson Custom. Check other listings in the shop for information and specs on these potentiometers and capacitors. If you need short shaft pots for a shallow top guitar the price of the kit is 47. Purchase here and the difference will be refunded. Kit includes: - 500K Emerson PRO CTS Long Split Shaft (audio taper/logarithmic) Potentiometers. Shaft Height: 3/8 (9.52MM) - 0.022uf/22nF and 0.015uf/15nF K40Y-9 PIO (Paper in Oil) capacitors NOS from former Soviet Union (Tested within the 10% range) - Switchcraft 1/4" #11 Mono Input Jack - 1.5m 22AWG black shielded, braided push back wire (pre-tinned) for power jack to switch - 1ft 20AWG ground bus wire Required Mounting Hole for Pots: 3/8 (9.52MM) **Switchcraft switches available in another listing** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €57
  • Miyama 3-Way Mini Toggle Switch, 2 Pole, (ON-ON-ON) Black

    3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. DPDT Switch (Double Pole, Double Throw) Flat Lever Type Made in Japan by Miyama Electric Co Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging

    €11.50
  • Switchcraft Short Straight 3-Way Toggle Switch for Gibson Guitars

    3 Switchcraft Short Straight 3-Way Toggle Switch -Made in USA -Industry standard 3-Way Toggle Switch for Gibson guitars -Fits USA PRS and import guitars like Epiphone & PRS SE models, Telecaster Deluxe etc -Includes standard mounting nut -Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. Material Frame: Steel, plated Bushing and Shaft: Copper alloy, plated Springs: Copper alloy Mounting Hardware: Knurled copper alloy locknut T10711, supplied Insulation: Rigid plastic spacers with plastic tubing through stack. Rigid plastic and/or thermoplastic lifters. Thermoplastic cam on actuator end Short toggle switch for 2-pickup guitars Dimensions: -Thread height 11/32" (8.74mm) -Required mounting hole dia. 1/2" (12.70mm) -Required body cavity depth 7/8" (22.23mm) SWITCH TIP NOT INCLUDED! **NOTE** Switchcraft pre-tins all lugs with solder from the factory making things easier for you to make your connections especially for the switch ground. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €19.95
  • Oak Grigsby 3-Way lever switch for Fender Telecaster

    3 Genuine Oak Grigsby 3-Way lever switch for Fender Stratocaster and Telecaster Used on USA Modern Fender Telecaster and vintage instruments. -Fits Fender & Fender style Teles and other guitars (some modification of the pickguard on Far Eastern Tele copies may be required check the spacing requirements below) -Fits 1/16 in. x 1-1/16 in. slot. 1-5/8 in. center to center screw spacing. 1-3/8 in. cavity -Single wafer configuration - 4 pole, 3 way lever switch. -Mounting screws included (Switch Tip NOT included) *Only tips for 'USA' switches will work with this switch. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

    €12.50
  • Oak Grigsby 5-Way Lever 'Super Switch', Four Pole

    3 The new improved Oak Super Switch by Electroswitch lets you wire guitars in imaginative ways not possible with our other 5-way switches. It's a special 4-pole switch with six lugs per pole (one common and one each for the five lever positions. This gives you unparalleled control over pickup and coil selection. This switch has the tabs turned outward for easy access while soldering. This does make the room required for installation approximately 1/4 of an inch more than the version with the tabs turned inward. The added terminals and double wafer allows a level of flexibility and control that is not possible with traditional lever switches. Now you have the option of coil cuts, series/parallel combinations, phase reversal and more. Terminal assignment: There are a total of 24 solder terminals (lugs) on this switch. The switch is divided into four separate circuits, or poles, and each pole has six lugs. Lug 0 is the common which is connected to other lugs depending on the lever's position. The five other terminals on each pole correspond to the five positions of the switch. Lug #1 = position 1, Lug #2 = position 2, etc. Many lever switches use the commons as outputs for the switch, but with this switch this is not necessarily going to be the case. The commons of this switch can be used to connect pickups together in ways not possible with other switches. This is an important concept to understand when designing custom wiring for this switch. Important Specs and Dimensions: Oak double wafer - 4 pole, 5 way lever switch Standard U.S. size. Fits 5/8 in. x 1-1/16 in. slot. 1-5/8 in. center to center screw spacing. 1-3/8 in. cavity depth. Mounting screws included Feel free to ask questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars. However, until Adverts get around to offering the customer and the seller a shopping cart so the seller can calculate the shipping for the customer for multiple items the only solution is as follows. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately depending on final weight of package** Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message.

    €26.95
  • Left Handed Fender Stratocaster Standard 5-way Pre-Wired Control Harness

    3 Our Prewired Kits offer a professional sounding upgrade to the wiring and components that come stock in your guitar. Used in this one is a modern CTS pot with a vintage dished back, it's still a top quality replacement component with a custom audio (logrithmic) taper so that there is no 'bunching' of volume (or tone) at one end of it's travel. This kit has been specially designed for the left handed guitarist and is loaded with correct Left Hand (also known as reverse log or anti-log) pots. CTS pots have been fitted to Fender (USA) guitars for years. With these kits you will notice improved clarity and response from your pickups and control over the guitar and also our kits will help to "warm up" or tame some of the shrill and sterile sounds that can come from stock electronics. We use individually tested NOS (new old stock) PIO (paper in oil) capacitors manufactured in the former Soviet Union and imported from Russia in all our guitars and kits. These are military grade capacitors and used in the aerospace industry. Noted for their warm tone and rich harmonics these capacitors coupled with Emerson pots have become my go to components for upgrading guitars. The capacitors pictured in this kit have been tested to exceed the stated value printed on them within the 10% tolerance range and never used if they fall below it. This kit is designed to be hassle-free with minimal connections to deal with allowing you to get back to playing quickly. All our kits are carefully and professionally soldered using the best vintage push-back wire for an uncluttered slick finish. Includes: - (2) 250K CTS Split Shaft w/ (3/8") .375" Shaft Potentiometers (reverse logarithmic audio taper pots for left handed guitarists) - (1) Genuine Oak Grigsby 5-Way Switch - (1) Switchcraft 1/4" Mono Input Jack (PREWIRED) - (1) Emerson Custom Volume Mod (Treble Bleed) - (1) Soviet Union NOS 0.047uf K42Y-2 Paper in Oil Capacitor (Tested within the 10% range) If you require a 22nF that can be arranged, please inquire. - (1) Everything wired onto an Emerson Custom ground plate (this really makes a difference in taming radio interference and hum) ***OUT OF STOCK*** (Sold on wooden board temporarily) price lowered as a result - Professionally soldered using Stew Mac pre-tinned vintage push-back wire. - Add 5 for Optional 7-Way switching (An additional mini toggle switch will allow you two extra pickup selections. Check last two photos for details on this. It will mean that you will have to drill a 6mm hole between the two tone pots on your scratchplate. There is a hole pre-drilled in the ground plate to make things easier for you. Alternatively if you don't want to mess with your scratchplate you could purchase one of our jack plate switches which will be available shortly. Control Layout: Master Volume Tone (Neck, Middle) Tone (Bridge, Middle) Switch Positions: 1. Bridge 2. Bridge & Middle in Parallel 3. Middle 4. Middle & Neck in Parallel 5. Neck Modifications: Bridge Tone Control Mod Normally there is no tone control for the bridge pickup on a Standard Strat wiring configuration. With this simple mod you can use the Mid tone control as your bridge tone control if you want to roll some of the highs off of that pickup. See my other listing 'Stratocaster Tone Split Kit' for another option for this. *Kit may work on Stratocaster copies but some modification of the pickguard may be needed. Should fit all Mexican and Chinese Strats no problem. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €72
  • Fender '72 Telecaster Deluxe Wiring Harness

    3 Direct drop in replacement for Fender 72' Telecaster Deluxe or use as an upgrade for a Mexican or Squier Deluxe. Includes: - (4) 500K Emerson PRO CTS Split or Solid Shaft w/ (3/8") .375" Potentiometers (you can choose 250K pots if required) - (1) Switchcraft Short 3-way Toggle Switch - (1) Switchcraft 1/4" Mono Input Jack - (1) 0.022uf/22nF K40Y-9 Paper in Oil Capacitor - (1) 0.015uf/15nF K40Y-9 Paper in Oil Capacitor - Professionally soldered using braided shielded vintage push-back cable and 18 AWG Buss wire All connections on switch and jack switch harness are covered with heat shrink tubing for strength and durability. *Some modification of the pickguard holes may possibly be required. Should fit all Mexican and Chinese Teles no problem. You will need US spec knobs for CTS pots!! Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message.

    €95
  • Phase Reverse/Split Coil Wiring Harness For Gibson Les Paul, Epiphone, Tele Deluxe

    3 Phase Reverse/Split Coil Wiring Harness For Gibson Les Paul, Epiphone, Telecaster Deluxe etc Specifations 2x CTS Push/Pull 500K Potentiometers 2x Emerson Custom 500k Potentiometers 1x K40Y-9 0.022uF (22nF) Paper in oil capacitor 1x K40Y-9 0.015uF (15nF) Paper in oil capacitor Switchcraft J11 Mono Jack Bridge volume control switch splits humbucker coil Neck volume control switch for phase reversal Can be supplied as a solderless harness with quick splice connectors If you require a customised harness please inquire. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €85
  • Gibson Les Paul Short Shaft Pre-Wired Harness (with 50's wiring)

    3 For Les Paul models with a flat top body instead of the curved arch top models. These normally utilise short shaft potentiometers and that is reflected in this pre-wired harness. Will work in any Epiphone Les Paul Studio and other styled copies for a welcome upgrade to quality components. Specifications: Kit includes: Emerson PRO CTS 500K Split Shaft (audio taper/logarithmic) Short potentiometers (Matched) Switchcraft 1/4" Mono Input Jack Soviet Union NOS 0.022uF/22nF and 0.015uF/15nF K40Y-9 Paper in Oil Capacitors and (Tested within the 10% range) The 15nF takes some of the mud of the neck 18 AWG Buss Wire **Switch Tip and Control Knobs Not Included** If you require long pots message me and I'll change the price. Long version is 4 extra. Whats so special about this 50s wiring? It affects your tone in three major ways: 1. The overall tone gets stronger, tighter, and more transparent. Its difficult to describe, but you might say its more in your face. 2. The typical treble loss that occurs when rolling back the volume is much less than with standard wiring. Both the volume and tone controls become more responsive, and they react more smoothly without the usual hot spots. Another bonus: By simply rolling back your guitar volume a bit, you can clean up an overdriven amp without getting lost in the mix. 3. The tone and the volume controls interact with each othersomething you might be familiar with from certain tweed-era Fender tube amps. When you change the volume, the tone changes a little bit as well, and vice-versa. This may be strange at first, but you only need a few minutes to get used to it. The 50s wiring exhibits much less treble loss that standard wiring because it follows a completely different curve, depending on the ratio of your pot. It works best with audio taper pots, preferably those with a 60:40 or 70:30 ratio. Smaller ratios like 80:20 or 90:10 limit this benefit and result in the typical on/off or bright/dull problem when using the controls. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €65
  • PRS Wiring Harness with Dual Coil Split modification

    3 For PRS and PRS SE guitars with a two control layout and three way switch. Choose what thepush/pull pot will do Coil Split Phase Reverse Series/Parallel Choice of 250K or 500K pots Choice of Switchcraft angled or tall switch Choice of solid or split shaft pots These CTS push/pull pots are the best on the market at the moment with a taper resistance of 15% and tight tolerance of +-7%. The tone pot is also of the highest quality by Emerson Custom USA. Comes with a right angled Switchcraft pickup selector switch and a NOS K40Y-9 paper in oil capacitor. Wired with vintage cloth covered push back cable and shileded braided cable for the Switchcraft power jack. Can be offered with solderless connections as the one pictured. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage by registered mail. Postage on this item is at the standard rate, if you want your items sent by registered post please send me a message. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

    €75