3 Can be purchased direct from my website at the following link>> https://www.eastwestguitars.com/product/dr-ducks-ax-wax/ Dr. Duck's Ax Wax & String Lube - The ultimate Organic cleaning-polishing-moisturizing formula for all guitars and other musical instruments. (including brass, woodwinds, strings, etc..) - Do the entire instrument (fretboard, headstock, front, sides, back, pickguards). - Lubes and restores strings. - Increases string life. - Used by Professionals Worldwide ... - Comes in a generous 4 oz. oval shaped bottle with an applicator flip top cap. - Helps prevent fret oxidation. - U.S. made with U.S. materials. - Pleasant Fragrance - Not an aerosol spray - safe for the ozone. - Bar coded for retail scanners. - Full directions on the back of the bottle with the above logo printed on the front - Cleans and lubes bridge saddles and fine tuners on locking tremolo systems. - Lubes tuning machine knobs and posts and strap locks.. - Unsurpassed as a raw wood conditioner... (fingerboards, bridges, etc..) - A MUST to protect your instrument in all climates - dry or humid. - Compliments and enhances the natural beauty of your instrument. - This is the safest musical instrument cleaning-polishing-moisturizing formula in the World!! - VERY FRIENDLY to delicate VINTAGE finishes as well as all modern instruments... RoHS Compliant Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Postage is at the standard rate, if you want your items sent by registered post please send me a message.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/cts-tad-custom-linear-potentiometer-250k-short-3-8%e2%80%b3-solid-shaft/ The TAD Custom Series made by CTS combines the highest quality details from over 70 years of experience at CTS: solid brass shaft, brass thread, Vintage Audio Taper control characteristics (for logarithmic pots) and the unique dimple design in which the shaft goes right through the housing. With the vintage dimple back potentiometers, the shaft goes completely through the pot to the domed top and is visibly fixed to the back. This provides maximum stability, and ensures the highest quality over the long term when used in guitars and amplifiers. This dimple back design makes the TAD custom series unique and at the same time one of the worlds best potentiometers for guitars and amplifiers. Our CTS potentiometers have a low torque for smooth rotation, and a unique anti-static coating. Additionally they come with a solid brass shaft and brass threads, hence, the perfect upgrade for any amplifier. Aged vintage pots often have a slightly increased value which gives the sound a little more life and kick. TAD Custom guitar potentiometers are designed to have values slightly above target, to produce this effect. Specifications: Track Taper: Linear Connection Type: Soldering Lug Resistance Value: 250K Casing: Dimple Back Shaft: 1/4 knurled Shaft type: Solid Thread: 3/8 brass Angle of rotation: 300 +/- 5 Rating: 1/4W @ 55C Insulation: 500V DC Rotational life test: 10,000 cycles Shaft material: Brass Terminal board: Bakelite with flame UL 94V2 *Mounting hardware included.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/copper-foil-shielding-tape-70-mm-wide/ Copper foil tape with conductive adhesive, designed for guitarists and electronics EMI. Custom made for East-West Guitars. Width: 50mm (2") Length: 5 metres (18ft) Thickness .05mm Product description: Copper foil tape has dual conductivity so current will flow through both sides and throughout the adhesive. One side is coated with a strong adhesive which is protected by paper backing on the roll. Resistant to oxidization and discoloration. Suitable for indoor and outdoor use. Construction: Cu 25m Conductive acrylic adhesive 35m Many uses: Adhesive copper tape is used for other applications, such as electromagnetic shielding or low-profile surface mount transmission line in electronics and in the production of tiffany lamps and construction of stained glass windows. It is also used to keep slugs and snails out of certain areas in gardens, potted plants, and trunks of fruit trees, and other trees and shrubs. The tape has a wide variety of uses and will perform perfectly when applied in the following roles: EMI guitar shielding, slug repellent, snail repellent, soldering, stained glass construction, paper circuits, educational aid, electrical repairs, household repairs, bonding, grounding, decoration, arts & crafts and many more.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product-category/lacquer/metallic/ Nitrocellulose lacquer has been used on guitars since the fifties and sixties because of its excellent characteristics. Forming a very thin layer it allows the wood to resonate freely with little restraint. It can be spot repaired easily and when buffed, shows a beautiful shine. Finally, the way this lacquer ages (cracking, yellowing, checking) adds to the character of the instrument. 400 ml per can (Each can will provide 6-8 coats of a guitar body depending on how liberal each coat is) **A few coats of clear gloss over the top of all colours is recommended for protection and a deeper shine. Colours available: Daytona Blue Kingfisher Blue Dark Pelham Blue Light Pelham Blue Burgundy Mist Charcoal Frost Dark Cola Aztec Gold Shoreline Gold Gold Top, Modern Gold Top, Vintage Sherwood Green Midnight Wine Ocean Turquoise Royal Purple Inca Silver Firemist Gold Leaf Green Coverage Aerosols provide approximately 1.2sq m of coverage each. One can is usually sufficient for most guitar bodies. We recommend 2 for basses. Usage Overview A. Preparation i. (Optional) Grain Fill Wood ii. Sand to 320 Grit B. Priming 1. Apply Cellulose Sanding Sealer Primer (3-4 coats) Sand to 600 Grit ii. Metallic Cellulose Guitar Paint (2-3 coats) D. Top coat of Clear Nitrocellulose Guitar Lacquer (3-4 coats) E. Polish If buying multiple cans please inquire for postage and lead time as I don't have all the colours in stock and may need to order what you require. Note* Postal regulations prohibit shipping aerosol cans outside of Ireland. This item must ship by ground freight only.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product-category/lacquer/boston-lacquer/ Nitrocellulose lacquer has been used on guitars since the fifties and sixties because of its excellent characteristics. Forming a very thin layer it allows the wood to resonate freely with little restraint. It can be spot repaired easily and when buffed, shows a beautiful shine. Finally, the way this lacquer ages (cracking, yellowing, checking) adds to the character of the instrument. Large 500 ml per can (Each can will provide 8-10 coats of a guitar body depending on how liberal each coat is) **A few coats of clear gloss over the top of all colours is recommended for protection and a deeper shine. Colours available: Black Gloss (x4) Vintage White (x1) Olympic White (x1) Old Fiesta Red (x2) Daphne Blue (x2) Sonic Blue (x1) Clear coat High Gloss (final layer) (x2) Clear coat Satin (final layer) (x4) Primer, white (light finishes) (x2) Primer, grey (for dark finishes) (x3) Primer, transparent (for see-through finishes) (x2) Tobacco Brown (perfect for honeyburst) (x1) Sunburst Red (perfect for 3 tone transition) (x3) If buying multiple cans please inquire for postage and lead time as I don't have all the colours in stock and may need to order what you require. Note* Postal regulations prohibit shipping aerosol cans outside of Ireland. This item must ship by ground freight only.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/les-paul-premium-wiring-kit/ Everything you need to re-wire your Les Paul guitar yourself or for your upgrade project. May fit Epiphone and other Far Eastern made guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are made by CTS to Tube Amp Doctor's custom specs. Check other listings in the shop for information and specs on these potentiometers and capacitors. If you need short shaft pots for a shallow top guitar the price of the kit is 56. Purchase here and the difference will be refunded. Kit includes: - (x4) TAD Custom CTS 500K Audio Potentiometer Long (3/4") Split Shaft (audio taper/logarithmic) Potentiometers. Shaft Height: 3/8 (9.52MM) - 0.022uf/22nF and 0.015uf/15nF K40Y-9 PIO (Paper in Oil) capacitors NOS from former Soviet Union (Tested within the 10% range) - Switchcraft 1/4" #11 Mono Input Jack - 1.5m 22AWG black shielded, braided push back wire (pre-tinned) for power jack to switch and pots - 1ft 20AWG ground bus wire Required Mounting Hole for Pots: 3/8 (9.52MM) **Switchcraft switches available in another listing** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

3 For custom wiring and switching configurations. Use for Series to Parallel switching, phase switch etc. DPDT Switch (Double Pole, Double Throw) Flattened actuator. Rating: 6A.125V.AC Insulation resistance: DC.500V 100M (MIN) Contact resistance: 20M (MAX) Made in Japan Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/cts-tad-custom-audio-potentiometer-250k-short-1-4-split-shaft/ The TAD Custom Series made by CTS combines the highest quality details from over 70 years of experience at CTS: solid brass shaft, brass thread, Vintage Audio Taper control characteristics (for logarithmic pots) and the unique dimple design in which the shaft goes right through the housing. With the vintage "dimple back" potentiometers, the shaft goes completely through the pot to the domed top and is visibly fixed to the back. This provides maximum stability, and ensures the highest quality over the long term when used in guitars and amplifiers. This "dimple back" design makes the TAD custom series unique and at the same time one of the world's best potentiometers for guitars and amplifiers. Our CTS potentiometers have a low torque for smooth rotation, and a unique anti-static coating. Additionally they come with a solid brass shaft and brass threads, hence, the perfect upgrade for any amplifier. Aged vintage pots often have a slightly increased value which gives the sound a little more life and kick. TAD Custom guitar potentiometers are designed to have values slightly above target, to produce this effect. Specifications: Track Taper: Logarithmic 30% (J type) Connection Type: Soldering Lug Resistance Value: 250K Casing: Dimple Back Shaft: 1/4" knurled Shaft type: Split Thread: 1/4" (6.4mm) brass Angle of rotation: 300 +/- 5 Rating: 1/4W @ 55C Insulation: 500V DC Rotational life test: 10,000 cycles Shaft material: Brass Terminal board: Bakelite with flame UL 94V2 *The height on the threaded bushing on this pot makes it ideal for mounting on Strat pickguards. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/tad-custom-audio-potentiometer-solid-shaft/ The TAD Custom Series made by CTS combines the highest quality details from over 70 years of experience at CTS: solid brass shaft, brass thread, Vintage Audio Taper control characteristics (for logarithmic pots) and the unique dimple design in which the shaft goes right through the housing. With the vintage "dimple back" potentiometers, the shaft goes completely through the pot to the domed top and is visibly fixed to the back. This provides maximum stability, and ensures the highest quality over the long term when used in guitars and amplifiers. This "dimple back" design makes the TAD custom series unique and at the same time one of the world's best potentiometers for guitars and amplifiers. Our CTS potentiometers have a low torque for smooth rotation, and a unique anti-static coating. Additionally they come with a solid brass shaft and brass threads, hence, the perfect upgrade for any amplifier. Aged vintage pots often have a slightly increased value which gives the sound a little more life and kick. TAD Custom guitar potentiometers are designed to have values slightly above target, to produce this effect. Specifications: Track Taper: Logarithmic 30% (J type) Connection Type: Soldering Lug Resistance Value: 250K Casing: Dimple Back Shaft: 1/4" knurled Shaft type: Solid Thread: 1/4" (6.4mm) brass Angle of rotation: 300 +/- 5 Rating: 1/4W @ 55C Insulation: 500V DC Rotational life test: 10,000 cycles Shaft material: Brass Terminal board: Bakelite with flame UL 94V2 *The height on the threaded bushing on this pot makes it ideal for mounting on Telecaster or Jazz Bass control plates. Also perfect for pickguard mounted Strat's for use with US sized metal knobs. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

3 Can be purchased direct from my website at the following link>> https://www.eastwestguitars.com/product/switchcraft-type-l11-3-8-mono-jack-long-bushing/ Switchcraft Type L11 Littel-Jax phone jack. Need a little more length to get that jack through a solid top or a deep rout? This long bushing 1/4" input jack is made just for thicker bodies. U.S. 3/8-32 threads Bushing length 3/8 in. (.375 in.) Long Bushing (Type L11) 0.375 Mates with standard " plugs and is available with 0.25" inside diameter bushing. Mono 2-Conductor. Open Circuit. Perfect replacement for Gibson ES335, Epiphone Sheraton, Fender guitar & amp input jacks. Includes nut and washer. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

3 The TAD Custom Series made by CTS combines the highest quality details from over 70 years of experience at CTS: solid brass shaft, brass thread, Vintage Audio Taper control characteristics (for logarithmic pots) and the unique dimple design in which the shaft goes right through the housing. With the vintage "dimple back" potentiometers, the shaft goes completely through the pot to the domed top and is visibly fixed to the back. This provides maximum stability, and ensures the highest quality over the long term when used in guitars and amplifiers. This "dimple back" design makes the TAD custom series unique and at the same time one of the world's best potentiometers for guitars and amplifiers. Our CTS potentiometers have a low torque for smooth rotation, and a unique anti-static coating. Additionally they come with a solid brass shaft and brass threads, hence, the perfect upgrade for any amplifier. Aged vintage pots often have a slightly increased value which gives the sound a little more life and kick. TAD Custom guitar potentiometers are designed to have values slightly above target, to produce this effect. Specifications: Track Taper: Logarithmic 30% (J type) Connection Type: Soldering Lug Resistance Value: 500K Casing: Dimple Back Shaft: 3/4" knurled Shaft type: Split/knurled Thread: 3/8"-32NEF brass Angle of rotation: 300 +/- 5 Rating: 1/4W @ 55C Insulation: 500V DC Rotational life test: 10,000 cycles Shaft material: Brass Terminal board: Bakelite with flame UL 94V2

3 High performance version of the popular 715P series. They are made from polypropylene film and foil with pure copper leads, making them ideal for high pulse current applications. Rated for 85 degrees celsius operation 5% tolerance. Straight radial leads, minimum 1.25" length. CDE Orange Drop capacitors made with film dielectric and metallized or foil electrodes are well known for their excellent performance in pulse DC and AC circuits. The Orange Drop line consists of roughly 20 series, each with its unique design to cover diverse AC and DC applications ranging from filter caps in switch-mode power supplies to snubbers that protect IGBTs in high power inverters. Data sheet can be found here: http://www.cde.com/resources/catalogs/716p.pdf Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/tad-custom-cts-500k-audio-potentiometer-long-3-8-split-shaft/ The TAD Custom Series made by CTS combines the highest quality details from over 70 years of experience at CTS: solid brass shaft, brass thread, Vintage Audio Taper control characteristics (for logarithmic pots) and the unique dimple design in which the shaft goes right through the housing. With the vintage "dimple back" potentiometers, the shaft goes completely through the pot to the domed top and is visibly fixed to the back. This provides maximum stability, and ensures the highest quality over the long term when used in guitars and amplifiers. This "dimple back" design makes the TAD custom series unique and at the same time one of the world's best potentiometers for guitars and amplifiers. Our CTS potentiometers have a low torque for smooth rotation, and a unique anti-static coating. Additionally they come with a solid brass shaft and brass threads, hence, the perfect upgrade for any amplifier. Aged vintage pots often have a slightly increased value which gives the sound a little more life and kick. TAD Custom guitar potentiometers are designed to have values slightly above target, to produce this effect. Specifications: Track Taper: Logarithmic 30% (J type) Connection Type: Soldering Lug Resistance Value: 500K Casing: Dimple Back Shaft: 1/4" knurled Shaft type: Split/knurled Thread: 3/8" brass Angle of rotation: 300 +/- 5 Rating: 1/4W @ 55C Insulation: 500V DC Rotational life test: 10,000 cycles Shaft material: Brass Terminal board: Bakelite with flame UL 94V2 *Mounting hardware included. Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging Shipping: I offer a choice between Standard or Registered shipping on all my items. I suggest to choose registered mail for your own protection of items being shipped otherwise use standard mail but at your own risk, choose the standard rate if you would like to save on shipping cost. But please be sure that mail never goes missing.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/pmt-v-treb/ The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. With the volume at 10, the V-Treb is removed from the circuit and does not affect the sound. To lnstall: 1. Peal the adhesive tape backing and attach the V-Treb circuit to the back of the volume pot as shown or chose another location to mount the circuit to allow easy adjustment if the back of the volume pot can not be accessed for adjustment. 2. Solder the input and output terminals of the volume pot to the gold solder pads on the bottom of the V-Treb or run wires as shown if mounted remotely from the volume pot. 3.Connect original input and output wires from volume to the gold solder pads on the top of the V-Treb or pot as shown. To Adjust The V-Treb: Set the volume between 6 and 8. Then use a small screwdriver to adjust the orange bypass amount control to the desired amount of treble bypass. Turning the trim pot clockwise increases the amount of treble bypass for a brighter sound at reduced volumes. Turning the trim pot counter clockwise reduces the amount of treble bypass for a warmer tone at reduced volumes. The V-Treb will not affect the tone when the volume pot is set to 10 (100% on) NOTE: Use a small flat head screwdriver and be careful not over turn or damage the trim pot. Get precise adjustment of tone as volume is reduced. Use with 250K & 500K pots - Single coils & Humbuckers. Improves audio taper roll off between 6 and 10. Will not affect tone at full volume. Mounts to any volume pot with included adhesive tape. Can also be remote mounted for easier adjustment. *Volume pot not included. Demo: https://www.youtube.com/watch?v=MYpjezFkIeM Feel Free to ask any questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Must be returned in an un-used state and in the original packaging

3 Purchase direct from my website through the following link>> https://www.eastwestguitars.com/product-category/lacquer/dartfords/tinted-colours/ Nitrocellulose lacquer has been used on guitars since the fifties and sixties because of its excellent characteristics. Forming a very thin layer it allows the wood to resonate freely with little restraint. It can be spot repaired easily and when buffed, shows a beautiful shine. Finally, the way this lacquer ages (cracking, yellowing, checking) adds to the character of the instrument. 400 ml per can (Each can will provide 6-8 coats of a guitar body depending on how liberal each coat is) **A few coats of clear gloss over the top of all colours is recommended for protection and a deeper shine. Colours available: Amber British Racing Green Dark Brown Dark Cobalt Blue Dark Oak Dark Orange Dark Rich Mahogany Dark Yellow Emerald Green Heritage Cherry Red Light Blue Light Brown LIght Orange Light Red Light Yellow Lightest Brown Lime Green Purple Strong Amber Teal Green Tint Black Tinted Walnut Tomato Red Weak Amber Weakest Amber Wine Red Coverage Aerosols provide approximately 1.2sq m of coverage each. One can is usually sufficient for most guitar bodies. We recommend 2 for basses. Usage Overview A. Preparation i. (Optional) Grain Fill Wood ii. Sand to 320 Grit B. Priming 1. Apply Cellulose Sanding Sealer Primer (3-4 coats) Sand to 600 Grit ii. Tinted Cellulose Guitar Paint (2-3 coats) D. Top coat of Clear Nitrocellulose Guitar Lacquer (3-4 coats) E. Polish If buying multiple cans please inquire for postage and lead time as I don't have all the colours in stock and may need to order what you require. Note* Postal regulations prohibit shipping aerosol cans outside of Ireland. This item must ship by ground freight only.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/dartfords-nitrocellulose-solid-colours/ Nitrocellulose lacquer has been used on guitars since the fifties and sixties because of its excellent characteristics. Forming a very thin layer it allows the wood to resonate freely with little restraint. It can be spot repaired easily and when buffed, shows a beautiful shine. Finally, the way this lacquer ages (cracking, yellowing, checking) adds to the character of the instrument. 400 ml per can (Each can will provide 6-8 coats of a guitar body depending on how liberal each coat is) **A few coats of clear gloss over the top of all colours is recommended for protection and a deeper shine. Colours available: Aged Olympic White Arctic White Vintage Cream TV Yellow Capri Orange Dakota Red Desert Tan Daphne Blue Graffiti Yellow Horizon Blue New Olympic White Olive Drab Green Seafoam Green Shell Pink Sky Blue Surf Blue Sonic Blue Surf Green Surf Orange Torino Red Union Blue Jet Black If buying multiple cans please inquire for postage and lead time as I don't have all the colours in stock and may need to order what you require. Note* Postal regulations prohibit shipping aerosol cans outside of Ireland. This item must ship by ground freight only.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/telecaster-control-plate-inch-sized/ High quality generic replacement for US and Mexican Tele's. Great upgrade for Far Eastern models for use with CTS pots and other inch sized pots. 1/4" holes for controls *Choice of Chrome or Nickel. Mounting screws included Dimensions: Length: 160mm Width: 32mm Mounting holes centres: 150mm Feel free to ask questions Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/tele-control-plate-angled-switch-slot/ Never fight with your Tele switch again! With an angled pickup switch, you'll never struggle when flipping between positions again. Telecasters are amazing guitars, but there's one design flaw: the switch location. With the switch in the bridge position, it's tricky to change pickups on the fly, especially in the heat of a gig. This simple tweak solves this annoying problem forever. Drop-in upgrade This plated brass Tele control plate has the same footprint as the classic original, but the switch location is moved slightly forward and angled. Now it's easy to get your finger between the switch and the volume knob, no more fumbling or finger acrobatics. This simple tweak makes it effortless to change pickups when you're playingyou don't even need to look. And you won't change the timeless look of your Tele! The switch angle is designed to accommodate all US switches. *Plate mounting screws included. Dimensions: Plate size: 6-3/8" x 1-1/4" (161.92mm x 31.75mm) Thickness: 0.082" (2.08mm) Plate mounting holes: 5-27/32" (148.34mm) on centers Switch blade slot: 1-1/16" x 1/16" (26.99mm x 1.58mm) Switch screw required: 6-32 x 5/8" Switch mounting hole distance: 1-5/8" (41.27mm) on centers Control pot hole diameter: 3/8" (9.52mm)

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/switchcraft-short-3-way-toggle-switch-for-les-paul-es-sg-tele-deluxe-etc/ Switchcraft Short Straight 3-Way Toggle Switch -Made in USA -Industry standard 3-Way Toggle Switch for Gibson guitars -Fits USA PRS and import guitars like Epiphone & PRS SE models, Telecaster Deluxe etc -Includes standard mounting nut -Contact Ratings: Fine silver contacts rated at 3A, 300W maximum AC non-inductive load standard. Material Frame: Steel, plated Bushing and Shaft: Copper alloy, plated Springs: Copper alloy Mounting Hardware: Knurled copper alloy locknut T10711, supplied Insulation: Rigid plastic spacers with plastic tubing through stack. Rigid plastic and/or thermoplastic lifters. Thermoplastic cam on actuator end Short toggle switch for 2-pickup guitars Dimensions: -Thread height 11/32" (8.74mm) -Required mounting hole dia. 1/2" (12.70mm) -Required body cavity depth 7/8" (22.23mm) SWITCH TIP NOT INCLUDED! **NOTE** Switchcraft pre-tins all lugs with solder from the factory making things easier for you to make your connections especially for the switch ground. Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. **Combined postage on all listings in my shop is available from East-West Guitars although Adverts does not seem to have this function unlike Ebay. If you are purchasing a bundle of different items I will refund you the surplus cost of postage or shipping immediately**

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/stratocaster-premium-wiring-kit/ Everything you need to re-wire your Fender Stratocaster yourself or for your upgrade project. May fit Far Eastern guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are custom made for Tube Amp Doctor by CTS Corp. and feature a 30% log taper and a smooth, low torque. Check other listings in the shop for information and specs on these potentiometers and capacitors. Kit includes: - (3) TAD Custom CTS 250K Split Shaft w/.375" (3/8") Shaft Length (audio taper/logarithmic) potentiometers (same price if you require 500K pots) - (1) Genuine Oak Grigsby 5-Way Switch - (1) Switchcraft 1/4" #11 Mono Input Jack - (1) 0.047uf/47nF K42Y-2 PIO (Paper in Oil) capacitor NOS (Tested within the 10% range) - (1) EWG Custom Treble Bleed - 1.5ft 22AWG white vintage push back wire (pre-tinned) - 1ft 22AWG black vintage push back wire (pre-tinned) - 0.5ft 20AWG ground bus wire - Wiring Diagrams if requested Data sheet for pots: https://www.tubeampdoctor.com/media/pdf/c8/28/dc/cts-d-a250k-sk.pdf **Switch Tip and Control Knobs Not Included** Options: - If you'd prefer a 0.022uF PIO capacitor add 5.00 to your order Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. If the customer is within a reasonable range collection of items may be available to them otherwise it is probably just as cheap to post the item.

3 Buy direct from our website through the following link>> https://www.eastwestguitars.com/product/telecaster-premium-wiring-kit/ Everything you need to re-wire your Fender Telecaster yourself or for your upgrade project. May fit Far Eastern guitars although you may need to ream the receiving holes slightly. These are not metric pots! Potentiometers are custom made for Tube Amp Doctor by CTS Corp. and feature a 30% log taper and a smooth, low torque. Check other listings in the shop for information and specs on these potentiometers and capacitors. Kit includes: - (2) TAD Custom CTS Solid Shaft w/.375" (3/8") Shaft Length (audio taper/logarithmic) potentiometers. *Emerson Custom pots if 500K value is required. - (1) Genuine Oak Grigsby 3-Way Switch - (1) Switchcraft 1/4" #11 Mono Input Jack - (1) 0.047uf/47nF K42Y-2 PIO (Paper in Oil) capacitor NOS (Tested within the 10% range) - (1) EWG Custom Treble Bleed - 2ft 22AWG black and white vintage push back wire (pre-tinned) Data Sheet for pots: https://www.tubeampdoctor.com/media/pdf/94/d0/e2/cts-d-a250k-s.pdf **Switch Tip and Control Knobs Not Included** Terms and conditions: If for any reason you are not 100% satisfied with your purchase you can return it to us within 14 days and a full refund will be provided. Buyer assumes responsibility for return postage. Potentiometers and other electronic soldered components must be returned in an un-used, un-soldered state and in the original packaging. If the customer is within a reasonable range collection of items may be available to them otherwise it is probably just as cheap to post the item.